Official BC Coilover Kit Development Interest.

[Wastelands Warrior]

Hey Rich, just wondering if you had any updates on those spacers?

[rbryant]

Hey Rich, just wondering if you had any updates on those spacers?

Sent to the machinist on Monday.

I called him today for an update but haven't heard back yet.

-Rich

[Wastelands Warrior]

Sent to the machinist on Monday.

I called him today for an update but haven't heard back yet.

-Rich

Thx Rich.

[rbryant]

Thx Rich.

The spacers are set for cutting on Wed.

-Rich

[rbryant]

I have the 1/2" spacers in stock with corresponding longer adjuster bolts.

(shown with a caravan top plate)


If you need/want a set send me a PM.

Thanks,
Rich

[iTurbo]

Hot dang Rich, that is some serious Git'r'done. Looks good!

[Wastelands Warrior]

I have the 1/2" spacers in stock with corresponding longer adjuster bolts.

(shown with a caravan top plate)


If you need/want a set send me a PM.

Thanks,
Rich

Thx Rich, got the spacers n' they look great!

[minigts]

Hot dang Rich, that is some serious Git'r'done. Looks good!

Yeah Rich doesn't play around. Always does great work and any time to wait is worth it. Thanks for investing in this for the community Rich.

[rbryant]

Yeah Rich doesn't play around. Always does great work and any time to wait is worth it. Thanks for investing in this for the community Rich.

Thanks Jon,

Just trying to make something as good as it should be in this case.

They shouldn't have needed the spacers in the first place so I wanted to make them the best that I could.

I will make future orders of the GJKHPA front shocks longer so that they don't need the spacers and anyone who previously ordered a set and wants the spacers will get them at a heavy discount.

-Rich

[BadFastGTC]

What is the warranty on replacement cartridges for the BC product? I just replaced mine in June and two of two replaced are shot & knocking.

[rbryant]

What is the warranty on replacement cartridges for the BC product? I just replaced mine in June and two of two replaced are shot & knocking.

1 year.

Please contact me via PM with the details and we can setup the warranty replacement.

-Rich

[BadFastGTC]

I wanted to thank Rich for stepping up to the plate and offering his help to resolve the issue I had with a replacement cartridge even though I had not purchased them from him. Anyone considering the BC products will be well served by him and happy with their decision. BC has taken care of warranting the cartridge after examining my failed one. I had a very unusual problem that left BCtech and myself scratching our heads. They sent my new one right away. These coil overs are one of the best purchases I have put on my SRT4 and anyone considering these will not regret the decision. Thanks again Rich!

[omni_840]

That's good to know regarding the customer service of BC!

I'm not surprised about Rich, he is a really great person to deal with

[rbryant]

BC Racing is offering a Black Friday Promotion of $50 off from a full kit for orders placed on Black Friday.
I still need to confirm that it would be $25 off from a half kit.

So if you have been waiting to order a kit this can save you a few bucks.

For the discount Just add a note with "BC BlackFriday" to your order and I will give the discount as a refund.

The requirement is that I submit the orders to BC on Black Friday (11/29) by midnight eastern so I will have to accept the orders early to prepare invoices to BC.

The cutoff to order will be midnight eastern on Thanksgiving 11/28!

To make things a bit easier I will add the discount on orders from 11/25 until the cutoff on 11/28.

-Rich

[Ondonti]

So its 800 for a full front "half" conversion.

[minigts]

Man I want kits for my GLHS and the CSX!!! I like my Konis, but after seeing these on Cordes' Daytona, I like these better. Hopefully I can get these by next summer.

[cordes]

Man I want kits for my GLHS and the CSX!!! I like my Konis, but after seeing these on Cordes' Daytona, I like these better. Hopefully I can get these by next summer.

I'll probably need a set too. The Konis on the CSX were set to full hard for our trip back...

[rbryant]

So its 800 for a full front "half" conversion.

Yes with the Black Friday discount the front half kit would be $795.

BC recently increased the cost of partial kits to where the half kit is now 60% of the cost of the full kit instead of 50% plus a handling fee (which means they cost about $25 more than they did) for a total of $600.

For the front half kit to be bolt on it requires my custom camber plate adapter kit which adds $220.

$600+220-25=795.

The costs are higher on the front half kit because of the camber plate adapter kit. The other factor is that I still don't have a BC rear shock for the GJHPA cars. The Kit for those cars includes the front kit, rear spring adapters, and rear springs. The shocks have to be purchased from another source. Currently QA1 is the best option I have. BC has a sample rear shock and they have sent it overseas for analysis to see if they can use existing parts to create it but it has been low priority for them given our low volumes.

The lbody Kit does have both front and rear shocks and I even offer a full ER series lbody kit for ~$2250 (minus 50 if ordered for black friday) if anyone else wants to get really serious.

-Rich

[rbryant]

Man I want kits for my GLHS and the CSX!!! I like my Konis, but after seeing these on Cordes' Daytona, I like these better. Hopefully I can get these by next summer.

Sounds good.

The black friday deal of $50 off from the full kit is about the best discount they are likely to give but it still isn't a huge percentage discount if you aren't ready.

I just wanted to be sure and offer the deal to everyone.

-Rich

[iTurbo]

So tempting! I would love to have a set of BC coilovers for my my Caliber SRT-4. Quite the rabbit hole to jump into though, considering all the supporting mods, whees/tires etc... I will be thinking about this a lot...This is the best deal I've found on BCs yet...