i need to sit down and spend a few hours reading this entire thread.....horizon suspension is coming up soon
i need to sit down and spend a few hours reading this entire thread.....horizon suspension is coming up soon
+1 ^ . I remember this thread from a while ago, but am totally lost now... Was anything made already for a G body Daytona? Or is being made?
The BR front setup is ready to go for the daytona and I have rear height adjusters in stock. The remaining component that I am trying to get from BC is the rear shock. I think I am close but I haven't been able to reach the tech guy working on it this week. I am also working on the ER setup for the daytona which is better but more expensive...
The lbody setup is ready to go in both BR and ER.
-Rich
Offering Custom/Niche FWD Dodge Products!
- 91+ 11" HAWK HPS/LTS Front Brake pads @ $30/1 or $55/2 sets Half Off MSRP of $70
- Custom MSD Spark Plug Wires and improved Dist Caps
- BC Racing Coilovers
- OBX LSD Rebuild Parts
- DOHC 2.0/2.4/Hybrid products
- Solid Aluminum Alternator Brackets, Holset Turbo Flanges, and Wheel Spacers
Main Products/Info/Sales Webpage
Amy update on the g-body kit?
Offering Custom/Niche FWD Dodge Products!
- 91+ 11" HAWK HPS/LTS Front Brake pads @ $30/1 or $55/2 sets Half Off MSRP of $70
- Custom MSD Spark Plug Wires and improved Dist Caps
- BC Racing Coilovers
- OBX LSD Rebuild Parts
- DOHC 2.0/2.4/Hybrid products
- Solid Aluminum Alternator Brackets, Holset Turbo Flanges, and Wheel Spacers
Main Products/Info/Sales Webpage
[SIZE="3"] [B]Jon Trotter[/B][/SIZE] [B]1985[/B] Dodge Shelby Charger, Currently decommissioned [B]1987[/B] Shelby GLHS, #937 [B]1987[/B] Shelby Lancer, #628 [QUOTE=Reeves;587010]I can be ready. Please send pics of wife. _____DodgeZ add comments here______[/QUOTE]
sorry i've been offline for a bit and out of touch with the thread but i'm understanding that we now don't have to go the QA1 route anymore for P bodies? not that i'm complaining, i love the ride i get from the car but to stay all one product is something i like
Turbo Joe
----------------------- 87 CSX #175 TIII powered, MegaSquirt3 Pro Ultimate, GTX3076R, Turbo Joe header, Lengel intake, Menegon ported head, the list goes on
Offering Custom/Niche FWD Dodge Products!
- 91+ 11" HAWK HPS/LTS Front Brake pads @ $30/1 or $55/2 sets Half Off MSRP of $70
- Custom MSD Spark Plug Wires and improved Dist Caps
- BC Racing Coilovers
- OBX LSD Rebuild Parts
- DOHC 2.0/2.4/Hybrid products
- Solid Aluminum Alternator Brackets, Holset Turbo Flanges, and Wheel Spacers
Main Products/Info/Sales Webpage
This is the video for the installation. There is a section where we did the modification.
http://www.turbo-mopar.com/forums/sh...=1#post1066317
This is the link to the post to show the pics of the finished product. This was for a Lancer. Literally used a hack saw to cut it down and left MAYBE a 1/16" on either side of the eyelet or whatever you call it. I feel if they either sized it from existing stock or just cut it down prior to build, they could insert this bushing no problem from the factory. Size we measured was 41mm in total width for the bushing.
http://www.turbo-mopar.com/forums/sh...=1#post1065978
But it fit great after the cut and they ride fine, no issues.
Last edited by minigts; 01-26-2015 at 12:08 AM.
[SIZE="3"] [B]Jon Trotter[/B][/SIZE] [B]1985[/B] Dodge Shelby Charger, Currently decommissioned [B]1987[/B] Shelby GLHS, #937 [B]1987[/B] Shelby Lancer, #628 [QUOTE=Reeves;587010]I can be ready. Please send pics of wife. _____DodgeZ add comments here______[/QUOTE]
Jon,
Thanks for the video!
I also showed this to BC and will try to get a shorter bushing for the tops in the future. I can't guarantee that they will change them given that I am already basically doing Frankenstein mix and matching with components of their inventory. We have to thank the stance crowd in this case as they do this so much that they opened the door for us to do it.
Just a couple of notes on the video (including BC's feedback to me on it):
The full stiff setting should only be for testing. The shocks and struts should be backed off a couple of clicks from full stiff when in use. IIRC Koni also recommends against running the their struts at 100% firm.
As the rear height is changed on the GJKHPA cars with the ride height adjusters the rear shocks should also be adjusted. The goal is to have the shock travel centered such that the bound and rebound are even at a given ride height.
-Rich
Offering Custom/Niche FWD Dodge Products!
- 91+ 11" HAWK HPS/LTS Front Brake pads @ $30/1 or $55/2 sets Half Off MSRP of $70
- Custom MSD Spark Plug Wires and improved Dist Caps
- BC Racing Coilovers
- OBX LSD Rebuild Parts
- DOHC 2.0/2.4/Hybrid products
- Solid Aluminum Alternator Brackets, Holset Turbo Flanges, and Wheel Spacers
Main Products/Info/Sales Webpage
Rich in response to your comments, what is the best way to calculate the height setting for the shock vs. the ride height adjuster? Should the shock be compressed some at rest while the car is jacked or set to the exact length/spacing between the lower mount and the upper mount? Is there a way to calculate this or a best way to set this? Does the paperwork that came with kit that I inevitably threw away have that info on it?
[SIZE="3"] [B]Jon Trotter[/B][/SIZE] [B]1985[/B] Dodge Shelby Charger, Currently decommissioned [B]1987[/B] Shelby GLHS, #937 [B]1987[/B] Shelby Lancer, #628 [QUOTE=Reeves;587010]I can be ready. Please send pics of wife. _____DodgeZ add comments here______[/QUOTE]
I believe the shock should be more or less centered statically with the car on the ground. If it has 5" of travel then it should be compressed by 2.5" at rest with the car on the ground. That way it can extend 2.5" or compress 2.5" as you go over bumps.
The fronts should be similar where they compress down the mid point of travel by the weight of the car.
-Rich
Offering Custom/Niche FWD Dodge Products!
- 91+ 11" HAWK HPS/LTS Front Brake pads @ $30/1 or $55/2 sets Half Off MSRP of $70
- Custom MSD Spark Plug Wires and improved Dist Caps
- BC Racing Coilovers
- OBX LSD Rebuild Parts
- DOHC 2.0/2.4/Hybrid products
- Solid Aluminum Alternator Brackets, Holset Turbo Flanges, and Wheel Spacers
Main Products/Info/Sales Webpage
Just ordered a set for my csx-t , If I remember i will take pics as I go ahead with the install
Rich, did you happen to get my email? Just checking on shipping times or tracking number if you have them.
Sorry I thought I replied. I will call BC tomorrow to see what the status is.
I was out of the country for a week so my time and phone/internet access were limited along with a bad timezone shift when trying to contact people. (
I am back now and catching back up.
-Rich
Offering Custom/Niche FWD Dodge Products!
- 91+ 11" HAWK HPS/LTS Front Brake pads @ $30/1 or $55/2 sets Half Off MSRP of $70
- Custom MSD Spark Plug Wires and improved Dist Caps
- BC Racing Coilovers
- OBX LSD Rebuild Parts
- DOHC 2.0/2.4/Hybrid products
- Solid Aluminum Alternator Brackets, Holset Turbo Flanges, and Wheel Spacers
Main Products/Info/Sales Webpage
they came in today . Looks like some of the parts are marked "Mazda 3/ Mazda 5 H.L.K." the front shocks "94 Neon" and the rears marked "E46" . Very interesting, I can't wait til the humidity outside dies down a little so i can start the install. Pics when that happens.
I just installed mine yesterday in an L body. Now I need to see what kind of alignment they can get for me.
[SIZE="3"] [B]Jon Trotter[/B][/SIZE] [B]1985[/B] Dodge Shelby Charger, Currently decommissioned [B]1987[/B] Shelby GLHS, #937 [B]1987[/B] Shelby Lancer, #628 [QUOTE=Reeves;587010]I can be ready. Please send pics of wife. _____DodgeZ add comments here______[/QUOTE]
Offering Custom/Niche FWD Dodge Products!
- 91+ 11" HAWK HPS/LTS Front Brake pads @ $30/1 or $55/2 sets Half Off MSRP of $70
- Custom MSD Spark Plug Wires and improved Dist Caps
- BC Racing Coilovers
- OBX LSD Rebuild Parts
- DOHC 2.0/2.4/Hybrid products
- Solid Aluminum Alternator Brackets, Holset Turbo Flanges, and Wheel Spacers
Main Products/Info/Sales Webpage