Page 1 of 19 1234511 ... LastLast
Results 1 to 20 of 379

Thread: Official BC Coilover Kit Development Interest.

  1. #1
    Basic Vendor (MSD, Hawk, etc) Turbo Mopar Vendor rbryant's Avatar
    Join Date
    Dec 2005
    Location
    Phoenix, AZ
    Posts
    3,459

    Unofficial BC Coilover Kit Development Interest.

    All,

    I have floated the idea out there a few times about selling BC coilovers.

    These are a far superior design to the coilovers that we currently have available. The big advantage is that when they are lowered the shock body actually goes into the mount and doesn't lose ANY travel. Aditionally they can be valved to take pretty much any spring we want. 12k (675lb/in) springs are no problem.


    My unofficial Frankenstein kit progress has been slow and after talking to the owner he said he wanted to consider an official kit but I need to be able to show that we want enough kits to do it!


    There would initially be two different kits:

    Lbody

    and

    GJKHPA body.


    The kits would be $1000 shipped and would include:

    Front Struts
    Rear Shocks
    Front and Rear Springs
    Spring Hats/Adjusters
    Bottom Spring mounts (non lbody)
    Bumpstops
    Dust Boots
    Front Camber Plates! (yes they are included in the $1k price but they don't currently offer caster adjustment)


    It would be basically everything you would need to bolt them to the car. The only non true bolt on component would be that lbodys would have to use the GJKHPA spindles so we don't have to make custom strut mounts.


    The shocks would be BR type: http://www.bcracing-na.com/products.php?view=BR_Type

    Let me know if you are interested I need to get 5-10 people for each body style. So far I think off the record about 4-5 people have been waiting for me to get this done some for each body style.

    It would take a month or so to get it done and I would also need a deposit of $100 or so to make sure you are serious.

    Lets make a sign up list to see if we can get it done.

    Lbody:

    1) Badger (Rampage, fronts and rear when avail).
    2) DOHCRT
    3) 4cefedomni (Rampage, fronts only for now).
    4) omni_840
    5) black86glhs
    6) rx2mazda
    7) 30 PSI SHADOW (Rampage, fronts only)
    8)
    9)
    10)

    Non Lbody:

    1) Badger
    2) turboz523
    3) DOHCRT
    4) Austrian Dodge (fronts)
    5) csxtra
    6) 88 C/S
    7) MoparBCN
    8)
    9)
    10)

    I will post some pictures of my prototype kit shortly.

    -Rich

  2. #2
    turbo addict
    Join Date
    Aug 2009
    Location
    Myrtle Beach, SC
    Posts
    1,734

    Re: Official BC Coilover Kit Development Interest.

    I would be very interested. Just not at this moment. Neither of my omnis are running

  3. #3
    Basic Vendor (MSD, Hawk, etc) Turbo Mopar Vendor rbryant's Avatar
    Join Date
    Dec 2005
    Location
    Phoenix, AZ
    Posts
    3,459

    Re: Official BC Coilover Kit Development Interest.

    Quote Originally Posted by thedon809 View Post
    I would be very interested. Just not at this moment. Neither of my omnis are running
    Irrelevant! My car doesn't run either but IMO it sure has some cool parts on it...

    Get them running soon because I need to get as many people as I can if we are going to make this an official product.

    I our cars are similar enough to some of their other stuff (SRT4/Neon/VW) that they can do it without too much development. If it weren't for that I really don't think they would even do it.

    Either way we still need to try and show them that they can make a small amount of easy money or they probably won't do it.

    -Rich

  4. #4
    Supporting Member II Turbo Mopar Contributor shackwrrr's Avatar
    Join Date
    Feb 2010
    Location
    Piedmont, Ohio
    Posts
    4,084

    Re: Official BC Coilover Kit Development Interest.

    I would be interested too if I wasnt a poor college student.
    Ian Adams

    Function>Form

    1990 shadow
    scrapped, too rusty

    1991 Spirit R/T
    Scrapped, parts sold

    1989 Turbo Caravan
    Daily beater with built-ish ​engine slowly evolving into weekend turbo beater.

  5. #5
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    18,559

    Re: Official BC Coilover Kit Development Interest.

    These are coming a little to late for me. I'm just subbing this year, so it's not in the cards. I will be heartbroken if they aren't offered when I can afford them though.

  6. #6
    Garrett booster
    Join Date
    Mar 2008
    Location
    Harrisburg, PA
    Posts
    114

    Re: Official BC Coilover Kit Development Interest.

    count me in for a g body setup

  7. #7
    Hybrid booster 4cefedomni's Avatar
    Join Date
    Mar 2006
    Location
    Delta B.C. Canada
    Posts
    694

    Re: Official BC Coilover Kit Development Interest.

    Any chance it will take longer than that? I want one but coming up with a thousand extra dollars right now is gonna be tough.
    you can't polish a turd! [COLOR="Red"][FONT="Arial Black"][/FONT][/COLOR]13.67@100.11

  8. #8

    Re: Official BC Coilover Kit Development Interest.

    Damn tempting, but what I'm going to do with my extra Konis then

  9. #9
    Garrett booster
    Join Date
    Dec 2006
    Location
    England UK
    Posts
    148

    Re: Official BC Coilover Kit Development Interest.

    I've been through all this with BC and had the RM series all spec'd out with them for full G body weights for a street/road race setup for my RT, but I am yet to take the plunge, there are several other companies I'm also interested in.

    I'm running the RM series on a 3kgt with no problems as yet, even if it has probably only done a 1000 miles on them so far, but they still have limited adjustability and fixed bump rates at either end of the scale.

    I've had innumerable amounts of calculations done on rates/valving/volume/viscosity etc etc to make the perfect suspension for my 87z for circuit racing, but it is now looking as though the k-frame, wishbones and knuckles will go so no need to build specific shock bodies...

    The BC shocks, all be it budget solutions, have some great features you wouldn't normally get without spending a lot more money and are well manufactured with good product support IMHO.

    Mr Bryant, Have you considered the RM series? They are only marginally more expensive, save on unsprung weight and are quite possibly stiffer by virtue of design.

    This is my original thread on BM- Custom Coilovers

  10. #10
    Invisible Turbo Mopar Contributor mcsvt's Avatar
    Join Date
    Dec 2005
    Location
    Poughkeepsie, NY
    Posts
    3,516

    Re: Official BC Coilover Kit Development Interest.

    mmm BC coilovers... I need them for my Magnum (same price even...) before the T-Ms though.
    -Gary Mazzone-
    1986 GLHS #168
    1989 Dodge Daytona Shelby
    1993 Plymouth Sundance

  11. #11
    Basic Vendor (MSD, Hawk, etc) Turbo Mopar Vendor rbryant's Avatar
    Join Date
    Dec 2005
    Location
    Phoenix, AZ
    Posts
    3,459

    Re: Official BC Coilover Kit Development Interest.

    Quote Originally Posted by 4cefedomni View Post
    Any chance it will take longer than that? I want one but coming up with a thousand extra dollars right now is gonna be tough.
    This is a car project everything always takes longer than the initial estimate....

    -Rich

  12. #12
    Basic Vendor (MSD, Hawk, etc) Turbo Mopar Vendor rbryant's Avatar
    Join Date
    Dec 2005
    Location
    Phoenix, AZ
    Posts
    3,459

    Re: Official BC Coilover Kit Development Interest.

    Quote Originally Posted by Garffus View Post
    I've been through all this with BC and had the RM series all spec'd out with them for full G body weights for a street/road race setup for my RT, but I am yet to take the plunge, there are several other companies I'm also interested in.

    I'm running the RM series on a 3kgt with no problems as yet, even if it has probably only done a 1000 miles on them so far, but they still have limited adjustability and fixed bump rates at either end of the scale.

    I've had innumerable amounts of calculations done on rates/valving/volume/viscosity etc etc to make the perfect suspension for my 87z for circuit racing, but it is now looking as though the k-frame, wishbones and knuckles will go so no need to build specific shock bodies...

    The BC shocks, all be it budget solutions, have some great features you wouldn't normally get without spending a lot more money and are well manufactured with good product support IMHO.

    Mr Bryant, Have you considered the RM series? They are only marginally more expensive, save on unsprung weight and are quite possibly stiffer by virtue of design.

    This is my original thread on BM- Custom Coilovers
    I have a full setup on my 87 GLHS right now but I still haven't finished the engine swap. Oh and there is that part about my frame getting pulled out to copy for everyone.

    The RAM and ER series would be no problem for the front struts. We should be able to do RAM series rears but the ERs might be harder. I wouldn't recommend the RAM series because they don't tend to last as long as the BR series does.

    The challenge is more about the mounting than the valving. I am targeting more of the economy crowd to get this going but after we get the initial batch made we could expand to the higher end.

    -Rich

  13. #13
    turbo addict Turbo Mopar Contributor minigts's Avatar
    Join Date
    Dec 2005
    Location
    Memphis, TN
    Posts
    6,565

    Re: Official BC Coilover Kit Development Interest.

    Wait...the plates are INCLUDED?! AAGGGGHH!!!!!! You're killin' me Rich.....killin' me.
    [SIZE="3"] [B]Jon Trotter[/B][/SIZE] [B]1985[/B] Dodge Shelby Charger, Currently decommissioned [B]1987[/B] Shelby GLHS, #937 [B]1987[/B] Shelby Lancer, #628 [QUOTE=Reeves;587010]I can be ready. Please send pics of wife. _____DodgeZ add comments here______[/QUOTE]

  14. #14
    Basic Vendor (MSD, Hawk, etc) Turbo Mopar Vendor rbryant's Avatar
    Join Date
    Dec 2005
    Location
    Phoenix, AZ
    Posts
    3,459

    Re: Official BC Coilover Kit Development Interest.

    Quote Originally Posted by minigts View Post
    Wait...the plates are INCLUDED?! AAGGGGHH!!!!!! You're killin' me Rich.....killin' me.
    This assumes that they actually make them... Originally I had planned on making an adapter bushing to use my plates with their struts. I even have the bushings in stock for it and I spent over $200 to make the bushings.

    Then I got their plates for an SRT4 and they didn't quite work so I made some adapter plates for their adjusters and planned on selling those... Now they say they want to provide the adapter plates. IF they make them then the plates will be based on my design so they are compatible with the footprint of my plates.


    I know what you are saying though. It wasn't my intention to sell people plates and then months later come up with something that could be considered better.

    The plates I designed are still the best bet for running Koni struts or other existing coilover products which is what they were intended for in the first place... I still have inventory for my camber plates so I am killing myself too...

    Their pricing structure is such that no matter what they include in the kit it is the same price so they are basically a free addon. The only extras I ever see them do are for rear camber plates on strut cars (which don't apply to us).

    If it would make you feel better I can work on BCs without the plates for the same $1000 but others might not like it...

    One thing to consider though is that the BC camber plates don't come with caster adjustment... I will see if I can get them to add it but right now they are camber only plates.

    -Rich

  15. #15
    turbo addict Turbo Mopar Contributor minigts's Avatar
    Join Date
    Dec 2005
    Location
    Memphis, TN
    Posts
    6,565

    Re: Official BC Coilover Kit Development Interest.

    Quote Originally Posted by rbryant View Post
    This assumes that they actually make them... Originally I had planned on making an adapter bushing to use my plates with their struts. I even have the bushings in stock for it and I spent over $200 to make the bushings.

    Then I got their plates for an SRT4 and they didn't quite work so I made some adapter plates for their adjusters and planned on selling those... Now they say they want to provide the adapter plates. IF they make them then the plates will be based on my design so they are compatible with the footprint of my plates.


    I know what you are saying though. It wasn't my intention to sell people plates and then months later come up with something that could be considered better.

    The plates I designed are still the best bet for running Koni struts or other existing coilover products which is what they were intended for in the first place... I still have inventory for my camber plates so I am killing myself too...

    Their pricing structure is such that no matter what they include in the kit it is the same price so they are basically a free addon. The only extras I ever see them do are for rear camber plates on strut cars (which don't apply to us).

    If it would make you feel better I can work on BCs without the plates for the same $1000 but others might not like it...

    One thing to consider though is that the BC camber plates don't come with caster adjustment... I will see if I can get them to add it but right now they are camber only plates.

    -Rich
    Oh I was just giving you a hard time. Believe me, I'm always impressed with your work. I don't have an immediate need for the struts, but I'll think about getting the setup for the future. As always,
    [SIZE="3"] [B]Jon Trotter[/B][/SIZE] [B]1985[/B] Dodge Shelby Charger, Currently decommissioned [B]1987[/B] Shelby GLHS, #937 [B]1987[/B] Shelby Lancer, #628 [QUOTE=Reeves;587010]I can be ready. Please send pics of wife. _____DodgeZ add comments here______[/QUOTE]

  16. #16
    Basic Vendor (MSD, Hawk, etc) Turbo Mopar Vendor rbryant's Avatar
    Join Date
    Dec 2005
    Location
    Phoenix, AZ
    Posts
    3,459

    Re: Official BC Coilover Kit Development Interest.

    Quote Originally Posted by minigts View Post
    Oh I was just giving you a hard time. Believe me, I'm always impressed with your work. I don't have an immediate need for the struts, but I'll think about getting the setup for the future. As always,
    Thanks,

    I can totally understand that it sucks to see a new thing come out right after you just bought the original camber plates.

    These are a different application because they require the BCs but still I feel for you and can only say that it wasn't my intention to suddenly spring a new thing when I am still selling the old one.

    -Rich

  17. #17
    turbo addict Turbo Mopar Contributor minigts's Avatar
    Join Date
    Dec 2005
    Location
    Memphis, TN
    Posts
    6,565

    Re: Official BC Coilover Kit Development Interest.

    Quote Originally Posted by rbryant View Post
    Thanks,

    I can totally understand that it sucks to see a new thing come out right after you just bought the original camber plates.

    These are a different application because they require the BCs but still I feel for you and can only say that it wasn't my intention to suddenly spring a new thing when I am still selling the old one.

    -Rich
    Absolutely not man. I know you're always thinking and coming up with new ideas. If I can afford to do it I will.
    [SIZE="3"] [B]Jon Trotter[/B][/SIZE] [B]1985[/B] Dodge Shelby Charger, Currently decommissioned [B]1987[/B] Shelby GLHS, #937 [B]1987[/B] Shelby Lancer, #628 [QUOTE=Reeves;587010]I can be ready. Please send pics of wife. _____DodgeZ add comments here______[/QUOTE]

  18. #18
    Garrett booster
    Join Date
    Feb 2010
    Location
    Winnipeg, MB
    Posts
    127

    Re: Official BC Coilover Kit Development Interest.

    This is a pretty sweet set-up. I'd be all over it if I didn't have a brand new pair of koni's sitting in my basement

  19. #19
    Hybrid booster 4cefedomni's Avatar
    Join Date
    Mar 2006
    Location
    Delta B.C. Canada
    Posts
    694

    Re: Official BC Coilover Kit Development Interest.

    What are the odds of me getting a set of fronts only? The car they would be going on would be a rampage which uses a leaf spring in the rear
    and shocks not a coil over like the rest of the omnis.
    you can't polish a turd! [COLOR="Red"][FONT="Arial Black"][/FONT][/COLOR]13.67@100.11

  20. #20
    Basic Vendor (MSD, Hawk, etc) Turbo Mopar Vendor rbryant's Avatar
    Join Date
    Dec 2005
    Location
    Phoenix, AZ
    Posts
    3,459

    Re: Official BC Coilover Kit Development Interest.

    Quote Originally Posted by 4cefedomni View Post
    What are the odds of me getting a set of fronts only? The car they would be going on would be a rampage which uses a leaf spring in the rear
    and shocks not a coil over like the rest of the omnis.
    I can do that half kits aren't a problem but i need enough people to order the rears so that we can reasonably get them done.

    I really need more people for the non lbody rears because those take more custom parts.

    We are looking at some rampage solutions but most of them involve radically changing the rear end and modifying the bed. There just isn't much room for coil springs on a Rampage.

    -Rich

Page 1 of 19 1234511 ... LastLast

Similar Threads

  1. Mobil 1 reproduction plaques, interest?
    By LaserXT1986 in forum General Vendor Area
    Replies: 89
    Last Post: 11-17-2012, 10:22 AM
  2. any interest in a a413 LSD?
    By boostedgolf in forum Transmission
    Replies: 13
    Last Post: 04-12-2011, 01:32 PM
  3. CSX Style grills -Interest?
    By Darkapollo in forum Interior, Exterior and Chassis Modifications
    Replies: 16
    Last Post: 09-12-2008, 11:23 PM
  4. Interest in IN group
    By fleckster in forum Shelby Dodge Auto Club
    Replies: 15
    Last Post: 08-22-2006, 02:33 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •