Ego bstr

[firebaron90]

Hello all, well as some of you know at SDAC 20, my Daytona was a no start 12 hours before the event, which lead me to not bring it. Well, that is when i decided I needed a change. So like a lot of people lately, I decided to go with a turbo mini project. I found a stripped down TBI van with minimal rust, and a lot of poetential. Since buying the van, I have been slowly acquiring the parts necessary to make it great. Pictures to come. My first project will be the suspension. I just scored newer struts and springs from St Craigs part out, and with the help of Dave Middleton, we scored a 94 minivan K frame, and REAR swaybar! Also in store is a set of Spirit R/T Front and rear brakes!

Joe

P.S. EGO BSTR is the license plate I want to get for it!

[turbovanman²]

Sweet but

[firebaron90]

Well, here is the van:


http://www.turbo-mopar.com/forums/at...3&d=1278270525


And all the parts are comming.....

[firebaron90]

Ok, well finally scored a 94 K frame. Gonna take it apart, clean it up, new bushings, ball joints. Weld up some of the seams,a nd give it a fresh coat of paint. Also have a set of 91 R/T front brakes and knuckles, and some daytona struts and springs. Phase of of "the lowering" has commenced.

[contraption22]

Sweet! BTW, dunno if you know this or not, but you can now check PennDOT for the availablity of vainity plates.