I want something other than the giant bus steering wheel that is in my shelby charger. Has anybody used a MOMO or Grant steering wheel in their car? What needs to be done to be able to use one? I'd like something smaller than the stocker, like maybe a 350mm wheel.
I know Grant used to make an adapter, not sure if they still do, but you'll probably need a spacer too.
I picked up a wheel off of TD a while back. It has a spacer with it to keep your knuckles from hitting the dash. It looks to be a grant wheel, but I cant tell for sure. All I know is that my legs can actually fit under the wheel a little now rather than having to be outside of it like I was driving a small gocart.
I dislike the bulky stock wheel also and so I replaced mine with a Grant. I used the #4315 install kit and #4000 spacer kit to clear the dash. It would have worked without the spacer, but only if my fingers were pencil thin.
Before:
After:
For my brother's Turismo, we bought a Shelby steering wheel and hub from an '87 Shelby Lancer, then bought a spacer from FWD Performance. It fits very well, plus looks nearly factory
MOMO use to make an adapter, but not any more. Plenty of room for your hands, it's just a bit more of a reach to the turn indicator arm.
I drove my '85 SC for about 20 minutes with the stocker, which is the time it took me to get to the MOMO dealer
Is the shelby wheel a Momo? I may be searching for an adapter soon.Originally Posted by crazy1eye
MOMO use to make an adapter, but not any more. Plenty of room for your hands, it's just a bit more of a reach to the turn indicator arm.
I drove my '85 SC for about 20 minutes with the stocker, which is the time it took me to get to the MOMO dealer
No it's not.
The Shelby medallion, which is glued to the MOMO horn button, I bought new, which I ordered from the dealer for a CSX.
Clean that interior for Pete sake. What do you do, bread farm animals in there?
Lazy bum...
I poke fun because I care...
Posting Permissions
Reply With Quote
