I have a few questions about setting the base timing on my caravan.
Which one is the number 1 plug wire? Is it the one closest to the driver side. I should know this...but I want to make sure I'm doing this correctly. So...which wire is it?
Which mark on the bellhousing am I aiming for? Right now, the timing mark on the flywheel is at the bellhousing mark closest to the firewall. Which one should it be at?
I know the basic procedure. Warm up the car...unplug coolant sensor...loosen distributor...turn until it gets where you want it...it's just the specifics that I need.
Thanks,
Matt