FB Head, 52mm TB, Adjustable WGA, Injectors, PB Front Eng Mount

[ShelGame]

1) 87 T1 Daytona Engine bay harness, has some plugs cut (alternator, windshield wiper, battery post), but could be used to modify another harness. Has the 50-way bulkhead and LM connectors, plus the solenoids, relays, etc. all still attached. Also, I have a TBI minivan harness I could cut the missing connectors from - $50 +shipping

2) 87 Turbo block. Was recently honed, but now it's rusty in the 1 of the bores. Std size - $25 pickup only

3) 2.2 T2 oil pan and pickup, from '87, non-CB - $20 +shipping

4) '87 T2 slider cam, surface rust from sitting but can be cleaned up - $10 +shipping

5) 782 FB Head, has the cam above still in it, greasy on the outside, but chambers look good, normal cranks between valves but they're small - $35 +shipping or $40 with the cam still in it

6) 52mm Throttle body from 95 3.3l V6 - $10 +shipping SOLD!

7) Large can T1 Garret adjustable WG actuator - $25 +shipping SOLD!

8) 91+ Polybushings front engine mount, used but no visible signs of wear - $25 +shipping SOLD!

9) 6 Ford 'blue-top' Injectors; these flow 39pph at 43psi - at TD fuel pressure they flow close to +20's - $50 for all 6 +shipping SOLD!

10) Square tooth crank pulley, looks to be new with just a little shelf rust, No belt wear - $10 +shipping

11) Infinity Slave CD player, looks to be in good shape. No way to test it, no mounting kit or wiring harness - $25 +shipping

[buckracer]

If Im putting a common block into an 88 would the 91+ poly front mount work? if so, deal.

[ShelGame]

I think it's larger than the '88 front mount unless you move the mount bracket over from a later car...

[gerbot_3000]

hey there, close to +20's is more than +20's or less than +20s flow?
Any other things you have around? i would really like that front mount.

[ShelGame]

hey there, close to +20's is more than +20's or less than +20s flow?
Any other things you have around? i would really like that front mount.

By the RC Engineering calculator, they'll flow 42.8pph at 55psi. Only slightly more than the Mopar '+20's' (42pph).

Buckracer has dibs on the PB mount, if he doesn't want it, it's yours...

[gerbot_3000]

sounds good, the injectors use the same connectors on ours?

[ShelGame]

Yep...

[gerbot_3000]

seems like a deal to me just waiting about the PB =)

[JohnnyIroc]

are you sure that is the 91 up style front mount?
i got one for my 91 from johnny and it did not have the blue grommets on either side
i thought that was the earlier style

[ShelGame]

If I don't hear back from buckracer by the end of the day, the PB is yours, too...

[ShelGame]

are you sure that is the 91 up style front mount?
i got one for my 91 from johnny and it did not have the blue grommets on either side
i thought that was the earlier style

This only has the grommet on one side and it's definitely bigger than the front mount on my '89 Daytona. I got it with a bunch of spare parts that came with my Spirit R/T.

[gerbot_3000]

and what other spare parts are there? :P

[ShelGame]

What are you looking for? I have a bunch of spares...

[gerbot_3000]

my girlfriend says it seems like the money burns my hands... i am not really looking for anything hehe. I do want the polibushing as it would be in my 91 RT, and the injectors... i think a have 2 sets of FFV 1 set of +20's, 1 set of +40s and one of almost ´40's dsms... and only 2 cars XD... i mostly buy from USA and sell stuff here in mexico, mostly chrysler turbo performance stuff. And... recently somebody asked for a performance cal for an 84 TI... so.. do you have? hehe

[ShelGame]

No, I don't have anything for an '84 T1, computer-wise. I do have a bunch of T1 intake parts (3 manifolds, airfilter housing, throttle body, etc.). I'd sell it all for $10 +shipping (my guess is shipping would be pretty high, maybe $50, there are a lot of parts in that box). The aluminum is worth that in scrap...

[gerbot_3000]

just needed the calibration for the 84 , what about one of those chromed mid 80s radio? a good used wideband? more PB? front strut bar?(i was planning on buying one of those ebay neon 25dlls shipped, and work some brackets to fit the spirit maybe) srt4 wheels? old digital gauges(80's)

[ShelGame]

I have an Infinity CD slave CD, but it's not chrome, it's black. I don't have the mounting kit for it, though.

I do have one of those neon strut bars, but the mount plates are on my van (getting rusty). I was going to put it on the van until I realized it's too short . I could take the the plates off the van if you're really interested...

[funatic]

Did you get my PM about the adjustable wastegate?

FUNATIC

[ShelGame]

Did you get my PM about the adjustable wastegate?

FUNATIC

Nope...

[prepared]

I'll take the PB mount, if still available. PM sent.