1) 87 T1 Daytona Engine bay harness, has some plugs cut (alternator, windshield wiper, battery post), but could be used to modify another harness. Has the 50-way bulkhead and LM connectors, plus the solenoids, relays, etc. all still attached. Also, I have a TBI minivan harness I could cut the missing connectors from - $50 +shipping
2) 87 Turbo block. Was recently honed, but now it's rusty in the 1 of the bores. Std size - $25 pickup only
3) 2.2 T2 oil pan and pickup, from '87, non-CB - $20 +shipping
4) '87 T2 slider cam, surface rust from sitting but can be cleaned up - $10 +shipping
5) 782 FB Head, has the cam above still in it, greasy on the outside, but chambers look good, normal cranks between valves but they're small - $35 +shipping or $40 with the cam still in it
6) 52mm Throttle body from 95 3.3l V6 - $10 +shipping SOLD!
7) Large can T1 Garret adjustable WG actuator - $25 +shipping SOLD!
8) 91+ Polybushings front engine mount, used but no visible signs of wear - $25 +shipping SOLD!
9) 6 Ford 'blue-top' Injectors; these flow 39pph at 43psi - at TD fuel pressure they flow close to +20's - $50 for all 6 +shipping SOLD!
10) Square tooth crank pulley, looks to be new with just a little shelf rust, No belt wear - $10 +shipping
11) Infinity Slave CD player, looks to be in good shape. No way to test it, no mounting kit or wiring harness - $25 +shipping