new dizzy new coil new cap an rotor new plugs new wires what else could it need? i just bought it yesterday the previous owner replaced all the parts it was running he went into the gas station came back out an it would'nt start any idea's?
new dizzy new coil new cap an rotor new plugs new wires what else could it need? i just bought it yesterday the previous owner replaced all the parts it was running he went into the gas station came back out an it would'nt start any idea's?
I take it that the engine cranks over ?
First thing I would do is check for compression in each cylinder.
I will bet that the CAMSHAFT snapped in two .
I have had this happen twice and it had no spark.
Chuck
lol really cuz its making some narrly grinding sound now guess its time to open it up.
sometimes a follower gets knocked out of position.
If your cam snapped the timing belt tension was too high.
no spark is either relay[the black square one] or bad hall effect sensor[between dizzy+cap].
Bet the auxillary shaft and oil pump gear are chewed up. Check the rotor position at TDC.
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
pretty sure its the cam guys thanks everybody