Does anyone have a none dodge part number for the shift selector seals on an A568? I found one for the 1-2 selector but not for the cross over. And the one I found for the 1-2 doesn't have the lip on it for the boot to stay on so a better number would be good. I phoned my local dealer and he said they were discontinued. (Remeber I'm in Canada) Any help would be greatly appreciated as it's leaking a decent amount.
Not sure if this is the seal you need but I have the seal for the bolt on tower, came in a kit, spare one.
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS!12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
In the shift selctor on top of the trans there are two shafts that the cables opperate. The horizontal shaft controls the 1-2,3-4,5-R. I have found a replacement for this seal but it doesn't have the large flare on it that the boot mounts to. This would just mean the boot wouldn't stretch over the shaft the same so not the end of the world but it would be nice to have it secure. The vertical shaft controls the 2-3,4-5. I don't have a replacement for this one and it is the one I think is leaking.
The only other thing could be if it is leaking alot through the vent. Has anyone else had this?
According to my info, DJ, they are both still available!
4505691 - SEAL ASSEMBLY, Selector Shaft Housing - List Price - $4.30 ($2.93 @ moparonlineparts.com)
4446285 - SEAL, Crossover Lever Shaft - List Price - $4.50 ($3.11 @ moparonlineparts.com)
John M. Fleck
'83 Dodge Rampage 2.2 w/ 2.5L Turbo 14.79@94
'87 Shelby Lancer #213 14.99@94
'89 Chrysler LeBaron GT Turbo 'vert 15.88@92
'92 Dodge Spirit R/T 13.50@104 ; 13.34@102 on slicks
'98 Dodge Neon R/T 15.66@89
'03 Dodge SRT-4 13.91@98
Has anyone successfully come up with an aftermarket equivalent for that one ?Originally Posted by fleckster
So the crossver shaft seal is no more through mopar and after calling the local dealer to learn this they found 1 place in NY that had 2 of them so I bought them both...
Also tried napa and of course to no avail. if yours isnt leaking then dont touch it !!!
Posting Permissions
Reply With Quote