What size pipe should i run? 2.5" or 3"? Its a all stock T1 2.2, only mods are FMIC, 2.5 injecters, 14psi, auto, no cat.
What size pipe should i run? 2.5" or 3"? Its a all stock T1 2.2, only mods are FMIC, 2.5 injecters, 14psi, auto, no cat.
If your done moding it than 2 1/2 will be fine imo
but if you are gonna put it on the quarter for some fun the 3" would breathe better
But the 3 doesn't fit well with the stock sv
good point oversite on my part
Stock T1... early or late? Garet or mitsu turbo?
You can neck up from the stock exhaust flange to 3-inch and run mandrel 3" out the back.
Anytime I'm asked what size exhaust the answer is always the largest you can fit/afford.
your right but i've seen it kill the donut if the sv is to small
mitsu with 2.25 sv. Thats probly all that will get done to in the near future.
if you have a 2.5" down pipe then run a 2.5" exhaust.
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
IMO 3" is too big, too hard to quiet on a stocker
just cut off my 3" welded on 2.5......IMO
The car is now mine and ended up getting a 2.5" exhaust with no cat and a hooker super comp muffler. I don't find it too loud but I don't mind a louder exhaust.
you can't polish a turd! [COLOR="Red"][FONT="Arial Black"][/FONT][/COLOR]13.67@100.11