Garage cleanout, drag radials & lots of parts

[Pandemoniac]

Travis Stewart
Mooresville, NC

UPDATE: these parts need to move! I've lowered the price on most of the items. Give me an offer and I will consider it.

Album with pics of the parts:

http://s623.photobucket.com/albums/t...%20for%20sale/



Alright, I need to clean out my garage, pay the bills & make more room for my new project.
Here's what I've got, check back because I will be posting up more parts as I find em.

BFG G-force T/A 215/60 14 Drag Radials, mounted & balanced on clean painted 14"x6" steel wheels. Tread is a little low but TONS of traction. $90

Stock 1-pc intake (non-egr casting) with factory throttle body & cable bracket (cruise & auto kickdown connections) $30

Factory TII intercooler (sorry, it's orange!) $25

Custom front mount intercooler, 2.5" in/out. Core size 5"x30", total length opening to opening 38" $30


Factory 2-bar MAP sensor $5

Camshafts:
2 '89 2.5 t1 roller, one w/ sprocket one without. $10 w/ sprocket $8 without. ('89 cams are sold)
'91 (?) 2.5 n/a roller cam w/ sprocket $10
'88 2.2 t1 roller cam (square tooth sprocket) $10

Used set of 8 roller rockers $10

Brand new set of 8 PT lifters (need to supply your own spacers to make them work) $15 (SOLD)

Distributor, no cap or HEP, $5
distributor hold-down bracket, $5
OR both together, $8

Power Steering pump & bracket, '88 model. $10

Common block water pump pulley $5

Set of used side engine mount & transmission mount $8

new in package polyurethane tie rod end boots $5 (SOLD)

'89 shadow instrument cluster (face was painted red) $12

'92 shadow instrument cluster (lit needles & electric speedo) $25

'89 shadow grille (screw-in insert style) painted black $10

'89 shadow coupe side windows & trim panels $35

[csomni]

do you have the rockers to go with the roller cams

[Pandemoniac]

Good question, I knew I'd forget something. I do have one full set of roller rockers, used, from my old '88 turbo new yorker. I'll price those at $10, but if you'd like to buy a cam & rockers together as a set, I'll knock off a couple bucks & make it $18 all together.
And if you'd like more than one cam for any reason, I'll let multiple cams go for $8 a piece. Still $10 individually though.

[turbovanman²]

Pic of the IC and tie rod booty's,

Any flow specs on the IC, and who made it?

[Pandemoniac]

Edit: added pic album of parts, added roller rockers & new PT lifters to the list.

Simon, I'm not sure who made the IC, it came from another turbo shadow I bought for parts a few years back. I believe it's custom built from part of a diesel pickup or maybe tractor trailer core, with custom end tanks. It's a tube & fin design. Honestly I'd expect it to flow similar to a stock srt4 unit. Worked very nicely in my shadow til I swapped to a water/air setup.
Pic of the IC is already in the album, I'll run out & get more pics, including the tie rod boots.

Edit: added more pictures including instrument panels, misc parts & tie rod boots.

[boost geek]

Brand new set of 8 PT lifters (need to supply your own spacers to make them work) $15
How much to V2P 5X4 B.C. Canada?

[turbovanman²]

Ok, thanks, it won't work for what I need but I'll take the booty's, shipped total to 98230.

[Pandemoniac]

Ok guys, whoever wants any parts shoot me a PM, & include your address. I'll get the estimate to you and I'll ship the stuff out the day I get payment!

[dds78910]

How thick is the core on the custom IC?

[Pandemoniac]

Core has 2" wide tubes, and the end-tanks are 3" thick.

[Simsy]

whats the ebst u could do shipped for the drag radials to 18508? any pics?

[Pandemoniac]

whats the ebst u could do shipped for the drag radials to 18508? any pics?

Check the link at the top of my 1st post, a couple pics of the wheels & tires are there. I'll try to get some shipping estimates figured out as soon as I can tomorrow(sunday) unless I have to take em in to get a good estimate, then it'll be monday.

[RamsterMan]

Pm Sent on the 89 Cams, Thanks RamsterMan

[prepared]

Do you have any of the mounts or tubing you used with the IC when it was in your shadow?

[Pandemoniac]

Hey everyone, thanks for the questions & offers so far. I was unable to get any shipping estimated done today, but Monday I will take some stuff in and get it figured out for everyone. Thanks for the patience!

Do you have any of the mounts or tubing you used with the IC when it was in your shadow?

Not a whole heck of a lot left, there might be a few pieces left at my friend's house, when we used a bit of it to help mock up his setup. whatever is left is probably steel though.

[Pandemoniac]

PMs sent with shipping info to those inquiring so far.

TONS of stuff left, this stuff needs to move! Anyone else?

[Pandemoniac]

Update: '89 turbo cams & PT lifters are sold, sale pending on tie rod boots.

[Pandemoniac]

Bump! Lots of good stuff left!

[Pandemoniac]

and-a-bump...

[Pandemoniac]

Bump yet again, lots of stuff left, and I have lowered the price on most of the items.