this weekend i had rebuilt motor installed in my car with lonewolf stage 1 cams and was wondering what degree some ppl might have their cams set at with adjustable gears before i start to adjust and test and see what the car likes. running them in a motor with ported stock intake and exhaust manifold, 54trim t3/t4 stage 2 .63 housing turbo, 58mm tb, stage 4 fwdp cal, devils own progressive meth injection. rebuilt bottomend has .020 wiseco pistons, stock rods and bearings, stock crank and 3 layer cometic hg. The cams were installed straight up and just wondering what some ppl have found using them and on what set up and turbo etc