Ok, I'm still getting a code 26 - I got a replacement fuel pump (ES7012) for the 1990 Daytona 2.5T - it was not an exact match for the old Bosch unit as it didn't have the pulse regulator on it (won't swap either - banjo fitting on the Bosch and the CarQuest/Airtex unit has the nipple molded into the end). I reinstalled everything and it still won't fire up - fuel fountains out the schrader much more forcefully than before (before it turns out I only had 10 psi - unfortunately I returned the tester to my friend...so no numbers to compare it to.)

I finally yanked the fuel rail/injectors and tried turning it over - I get a little squirt from each injector about every other revolution or so - that seems right yes? It's not a massive spray though....

Lastly, no fuel is coming out of the regulator - I even unscrewed the return line and pulled the vac hose off the regulator. If I've got the 43psi I'm supposed to, shouldn't fuel be returning from the reg?

It'll start with ether, but not stay running.

Any ideas?