Shot in the dark, but I need a Turbo Housing (Holset)

[Subliminal]

Hey folks,

So, I recently converted my Cummins truck from auto to manual. The auto would actually spool my turbo...the manual really doesn't...at least not for a loooong time.

At any rate, I was wondering if any of you folks had any exhaust housings laying around. I know the Holsets have become a popular swap on some of the cars.

I'd like anything from a 12cm2 wastegated to a 16cm non-wastegated to replace my 'Lagmaster' 21cm H1C.

Thanks!

damon

[turbovanman²]

What Holset do you have now? Housings aren't interchangeable on some of the turbo's.

http://www.turbo-mopar.com/forums/vb...&articleid=122

[Subliminal]

I have the H1c with the 21cm housing. Laaaaaaagmasterrrrr... My truck smokes like a chimney when i shift gears, as it takes a while to build boost again. Kind of annoying.

I could use anything from a wastegated 12 to a standard 18...although the smaller the better, really.

[Subliminal]

PS - That is one heckuvan informant article!

[risen]

I have a turbine housing from a HX-35 with the divided inlet and a internal gate. Came from what I believe is a factory reman unit. I have a bullseye housing for it, so I don't need the factory housing. If you want it make me an offer.

[Juggy]

I have the H1c with the 21cm housing. Laaaaaaagmasterrrrr... My truck smokes like a chimney when i shift gears, as it takes a while to build boost again. Kind of annoying.

I could use anything from a wastegated 12 to a standard 18...although the smaller the better, really.

i have this exact same turbo sittin here next to me. i thought the 21cm housings came with the manual trucks????? and it was only for a certain year or two

was thinking about using it on the 8 valve but get a smaller housing or one of those bulleye or bullseye? housings