rebuild kit

[turbors89]

I recently purchased a garett t2 turbo and i wanted to buy a rebuild kit from g pop shop and attemp to do it myself. Which kit is it the T2, T25, and T28 Rebild Kit? and it shouldnt be to hard right?

[CSX153]

well, its a Garrett T03 turbo stock.

[86seeS]

you need the t3 basic kit #2 4pc carbon seal its not bad as long as you keep it in balance it comes with directions after shipping its like 70.00 good guys there at g-pop highly recomended if you have questions just call them they helped me out plenty of times

[rampant150]

Just did my tII, it took me and my brother about 2 hours. Its quite easy to do, just make sure you heat up the bolts on the exhaust side with a torch and dip all new seals in oil on reassembly.

[Muertoloco]

i just "rebuilt" my turbo with a kit from g-pop, i had a crap tubo laying around that i praticed on before doing the one that went on my car. Probably the hardest part was getting the bolts loose on the exhaust side. I didn't have a torch so i kept spaying the bolts 4 times a day with pb-blaster for about 2 days. And the other problem i had was the snap rings on the inside of the bearing...wear eye protection.