I have a new item, a replacement for the factory weak track bar. A track bar or panhard rod for the Daytona, Shadow, Lancer, Spirit, etc (all k-based cars). The stock ones tend to bend. The rod end ones are not perfect for street cars. So I developed one that I think is just right. It is adjustable on one end. It has polyurethane bushings on both ends.
They are plated in yellow zinc for rust protection, but you can paint or powder coat over the zinc.
Made from 7/8 inch DOM, 0.156 wall steel tubing.
Part number #1095
Price is $119 each.
Red arrow points to the Track Bar
Green arrow points to the after market PolyBushings anti-sway bar
Blue arrows point to the axle