Only temporary in the stock location untill my box from TU comes in. I have some concerns though. Under part throttle accel My AFR shoots to around 16:1 and under Decel my AFR is around 12-13, But under cruise I am at 14.5-15.3 and WFO I get 12-12.5:1. So whats the deal and why is my computer doing this. Is it because I have run for so long with the narrowband not even there? I am running a Techedge unit and the NB from that is hooked up but I didnt reset my sbec.
Attached is a screenshot of the datalog, The beginning is cruisee at 14.7, then there is a part throttle accel which shoots to 15.6, finally a decel that shows a 12.5. I couldnt log a full throttle where I was but thats around 12.3.
I know the signals are noisy but that didnt happen untill I hooked up the wideband(I think theres a jumper to fix that) and my map is in +- psi right now and isnt accurate. I havent found a good voltage lookup table for the stock 2 bar.