WOW! You are really making some progress
LOL Man, I'm sure you can get them to adjust the database to add Shelby in the Make table! Just flash some of your women with the guys at the state office and you have at it with the ladies.
Man I hope I make more and more. I really wish I had my wiring stuff here, I'd get the harness done this weekend.
I just got the fuel rail pretty much done, but since I ran out of supplies I have to wait until next weekend to finish it. The good news is all of the wiring stuff will be here by then, along with the painting supplies. Here are some pictures of the work in progress.
[SIZE="3"] [B]Jon Trotter[/B][/SIZE] [B]1985[/B] Dodge Shelby Charger, Currently decommissioned [B]1987[/B] Shelby GLHS, #937 [B]1987[/B] Shelby Lancer, #628 [QUOTE=Reeves;587010]I can be ready. Please send pics of wife. _____DodgeZ add comments here______[/QUOTE]
ive started a notebook i named it "great ideas ive stolen from jon"
HOOSIER SDAC vice pres. 1993 IROC R/T 1 of 90 emerald green 1985 DC SHELBY CHARGER 1985 DC TURBO Z DAYTONA
[SIZE="3"] [B]Jon Trotter[/B][/SIZE] [B]1985[/B] Dodge Shelby Charger, Currently decommissioned [B]1987[/B] Shelby GLHS, #937 [B]1987[/B] Shelby Lancer, #628 [QUOTE=Reeves;587010]I can be ready. Please send pics of wife. _____DodgeZ add comments here______[/QUOTE]
Here's a final mock up of the fuel rail harness. I'll be adding a wire for the knock sensor and possibly the temp sensor, but I haven't decided on whether or not to wire the temp sensor on the front or rear of the plenum.
[SIZE="3"] [B]Jon Trotter[/B][/SIZE] [B]1985[/B] Dodge Shelby Charger, Currently decommissioned [B]1987[/B] Shelby GLHS, #937 [B]1987[/B] Shelby Lancer, #628 [QUOTE=Reeves;587010]I can be ready. Please send pics of wife. _____DodgeZ add comments here______[/QUOTE]
Where do you get all your parts for the wiring?
http://www.rs-autosport.net/catalog/
That's where I got the ends. The ends come with the terminals. The wire is 16GA for the signal wires and 18GA for the wires going to the LM. I'm still not finished, but that is about what it would look like when it's done. The loom I'll be getting will cover most of it.
[SIZE="3"] [B]Jon Trotter[/B][/SIZE] [B]1985[/B] Dodge Shelby Charger, Currently decommissioned [B]1987[/B] Shelby GLHS, #937 [B]1987[/B] Shelby Lancer, #628 [QUOTE=Reeves;587010]I can be ready. Please send pics of wife. _____DodgeZ add comments here______[/QUOTE]
Well I'd just want to get what they are worth out there. I know that's vague in some ways, but I don't care to gouge anyone on the price. I just know I'd need to sell them to offset the cost of buying the coil over kit. These need a rebuild so not sure how much I could get for them. :\
[SIZE="3"] [B]Jon Trotter[/B][/SIZE] [B]1985[/B] Dodge Shelby Charger, Currently decommissioned [B]1987[/B] Shelby GLHS, #937 [B]1987[/B] Shelby Lancer, #628 [QUOTE=Reeves;587010]I can be ready. Please send pics of wife. _____DodgeZ add comments here______[/QUOTE]
Shoot me a price if you need to. That and the Mobil and shift pattern decals are all I'm missing for Shelby specific items on my S.
Darn it! Don't put me on the spot like that. hehe I'll think about it and see what is fair.
On another note, I have a lot of things coming in and things to do!
Underhood lining (ordered, thanks Dave!)
Painless wire loom (ordered)
Wiring tape (ordered, Audi style from the Captain of Chaos!)
Terminals and connector (ordered)
Camber plates (ordered, Rich Bryant style!)
Power coating material (ordered, valve cover and brakes)
Door skin window scrapers (already here!)
Window bushings (already here!)
CV shaft replacement (already here)
Rockford Fosgate RFDB4 Battery Terminals (ordered)
There's more to do before SDAC, but those are the things I've purchased and will be taking care of in a week.
Last edited by minigts; 06-06-2010 at 01:07 AM.
[SIZE="3"] [B]Jon Trotter[/B][/SIZE] [B]1985[/B] Dodge Shelby Charger, Currently decommissioned [B]1987[/B] Shelby GLHS, #937 [B]1987[/B] Shelby Lancer, #628 [QUOTE=Reeves;587010]I can be ready. Please send pics of wife. _____DodgeZ add comments here______[/QUOTE]
Well I got some painting done on the hood and roof just to keep it presentable. There is plenty of rust in the jambs, but it's not bad. I will definitely need to pull the doors, fenders and hatch off to get to everything but that will be later. More progress later, but here is a teaser!
[SIZE="3"] [B]Jon Trotter[/B][/SIZE] [B]1985[/B] Dodge Shelby Charger, Currently decommissioned [B]1987[/B] Shelby GLHS, #937 [B]1987[/B] Shelby Lancer, #628 [QUOTE=Reeves;587010]I can be ready. Please send pics of wife. _____DodgeZ add comments here______[/QUOTE]
This recent flurry of posts makes me feel like I am running terribly behind if I want to make it to SDAC in an Omni. This is of course very true, but none the less...
cover the hood with a few rolls that fake carbon fiber decal stuff freak out the ricer kids lol
HOOSIER SDAC vice pres. 1993 IROC R/T 1 of 90 emerald green 1985 DC SHELBY CHARGER 1985 DC TURBO Z DAYTONA
Man, you'll have it ready by SDAC. You still have a couple of weeks before you head down here, so get ta steppin'!
lol Well I decided to cover the hood with some cheap paint just to save face. This is by no means the paint job as much as it is a band aid, albeit a cheap and quick one. I really didn't want to mess with this, but the rust was just too much for me to continue looking at.
There are a couple of places where I pulled the tape too soon and didn't cut it properly, so it pulled it on the roof. And I forgot to leave the tape up along the pillars, so there is a definite line there. I may be able to sand it down and blend it but who really cares? lol There were also some places on the back of the roof that were really bad, but again no big deal. I figure some 1000 grit and a descent buff will make it look half way descent.
[SIZE="3"] [B]Jon Trotter[/B][/SIZE] [B]1985[/B] Dodge Shelby Charger, Currently decommissioned [B]1987[/B] Shelby GLHS, #937 [B]1987[/B] Shelby Lancer, #628 [QUOTE=Reeves;587010]I can be ready. Please send pics of wife. _____DodgeZ add comments here______[/QUOTE]
It looks a lot better than it did before. I don't suspect that lichens were recently evicted anymore.
That sounds like a bunch of technical mumbo jumbo.
Well... I didn't get much done today. I was hoping to get both doors done with the interior molding and the bushings, but I had to deliver the brakes, knuckles and a couple of cam gears to get media blasted and I ended up talking to a guy who apparently collects Stern wheels. I mean the guy had like 8 sets not to mention a nice set of Recaro seats and a bunch of other stuff. He has 4 Mustangs; one Saleen, one SSE, one 94 GT and a 1990 convertible GT. Two of the four cars have Sterns.
But I did get the window bushing in on the driver's side along with a freshened door weather strip that is in very good shape. It's only missing 2-3 of the push deals. I also replaced the interior window scraper. THAT I'm not happy about and will be buying ones that are lower. These are WAY too tall and for some reason you can see the "staples" I used to secure it to the door skin. Having said that I was able to engineer a way to keep it on the skin with finishing nails and some precision spec'ed engineering.
I had to drill holes and then use the staple I made to push it through. It wasn't too easy at first, but after I did a few, it got easier.
Overall I'm glad it is installed, but I'm not happy with the way it's sitting. I'm going to pull the door skin off and see if I can adjust things to make it sit better, but overall I think I'm going to have to order some new stuff. The place I ordered this from is the same place someone else posted. The guy told me they do sell a shorter trim piece, but at the time I didn't think it would be that big of a deal. Now I do. You can see the staples in this picture and that the door seal is WAAAY taller than the outer scraper. The skin sits fine on the door, so I don't know what I can do with it other than get shorter stuff. :GRRRR:
[SIZE="3"] [B]Jon Trotter[/B][/SIZE] [B]1985[/B] Dodge Shelby Charger, Currently decommissioned [B]1987[/B] Shelby GLHS, #937 [B]1987[/B] Shelby Lancer, #628 [QUOTE=Reeves;587010]I can be ready. Please send pics of wife. _____DodgeZ add comments here______[/QUOTE]