Trying to do all of that. Worked on the car tonight and plan to work on it tomorrow. Got the suspension squared away with the new heim joints, probably will get the k-frame installed tomorrow. Need to get the power steering fittings for the rack finished so I can loop the lines since I'm not running PS anymore. Also got some wiring done tonight, but still have a lot more to do. Sensors are in and ordered some split loom and fire retardant sleeving for the starter wires and a starter wrap. The last starter fell apart, so figured it would be a good idea to cover it with something protective. And while I do have wraps on the heater hoses, I wouldn't mind putting some type of heat shield cover around the MC as a precaution.
Rest of the things I need to work on are cleaning up the valve cover, prepping the head for installation and getting that back on. Still need to get the radiator installed, but probably will wait until everything else is in before I place it. Without the head or the air filter in place, it's hard to know where it should sit and I don't want to make any mistakes with where it should be mounted. Lots to do, but I think I have a good road to get everything done by next week with a day or so to spare.