Spirit R/T and Daytona R/T body parts FS Can Deliver to SDAC

[Turbo3Iroc]

White Spirit R/T parts:

4 complete doors. Pass front door has a small spot of rust on the bottom lip. The other 3 were clean, some missing paint of course. The interior panlels are there but could use a cleaning. $25 each.

Rear bumper cover $50

Side gfx with brackets and hardware $75 for both

Front springs $20
Knuckles and calipers for big brake setup $40 sold

Grey steering column with key and air bag. $40

Red Daytona R/T parts:

Hatch without spoiler. $40

Drivers door, no gfx or interior panel. No rust. $50

Pass door, no gfx, interior panel or mirror. Some rust on the bottom lip, paint is pretty faded on top. $40

Rear bumper cover $60

94 P body V6 car:

Front springs $20

Knuckles $20

All prices are OBO + shipping if delivery is not arranged. I'll post pics of anything requested. Didn't want to make a 56k nightmare thread.

[Turbo3Iroc]

Bump.

[hutwe]

Interested in the driver's side doors.
I'd like to see a few pics.
Could I get a measurement from the top of the jamb strap to the hinge locations? I'd hate to get them, only to find out that a hinge location is off.

Also, if you could have a look on the inside bottom seam behind the door panels to make sure the seam is good on the inside.
I appreciate it!

[Turbo3Iroc]

Interested in the driver's side doors.
I'd like to see a few pics.
Could I get a measurement from the top of the jamb strap to the hinge locations? I'd hate to get them, only to find out that a hinge location is off.

Also, if you could have a look on the inside bottom seam behind the door panels to make sure the seam is good on the inside.
I appreciate it!

I'm not exactly sure where you're asking me to measure. I assume you're referring to the Spirt doors. The car they came off of was in t front ender but all 4 doors still opened and closed without any sagging.

I'll see about removing the door panels to check inside but it will more than likely be after the weekend.

Here's some pics:

[Turbo3Iroc]

I just noticed you're in the Boston area. Are you coming to the Papa's Dodge show in CT this weekend?

http://www.papasdodge.com/classic-cruise-nights.htm

[Turbo3Iroc]

[minigts]

I'll take the knuckles and calipers for the big brake setup delivered to SDAC. Can I pay you there please?

[Turbo3Iroc]

I'll take the knuckles and calipers for the big brake setup delivered to SDAC. Can I pay you there please?

Not a problem. I'l put those on the list. Thank you.

[hutwe]

I was in NH all weekend, so I couldn't make the show in CT. That was just bad timing, I would have otherwise been all over it. I've owned TD's for 8 years now, and I've only met a small handful of people involved in them. Would have been good to put some faces to the names.
I am interested in the Spirit doors though, Driver's side ones.

[Turbo3Iroc]

We are going to be at LVD this Saturday, are you able to make it there? We have meets all over the area.

[hutwe]

Heading to the Indy 500 this weekend, and spending the remainder of the week in Virginia. I'm home after the 7th though. Is there a board with the dates at all?

[Turbo3Iroc]

Cool, have fun at the 500.

Our website is here: http://www.sdacne.com/

And you can join our yahoo list right there if you like.

[Turbo3Iroc]

Friday bump

[Turbo3Iroc]

Bump.

[Turbo3Iroc]

Open to offers.

[minigts]

Open to offers.

$30 for the brakes? Just kidding.

[inplansight]

Do you have the rear hubs and spindles ?
Paul B

[Turbo3Iroc]

Sorry Paul, those are long gone.

[dds78910]

Dont suppose you would consider shipping the hatch would you?

[Turbo3Iroc]

Dont suppose you would consider shipping the hatch would you?

Ouch, if you know of a carrier that would take it I would be willing to try but I think the shipping costs might get ridiculous on this.