Results 1 to 6 of 6

Thread: Scanner values for total advance

  1. #1
    turbo addict Turbo Mopar Contributor iTurbo's Avatar
    Join Date
    Dec 2005
    Location
    Gillette, Wyoming
    Posts
    5,384

    Scanner values for total advance

    What kind of values should I be seeing on my OTC 4000E scanner for the total advance (ADV)?

    At idle it says 12, 22 on decel, 34 at cruise on the interstate, and WOT it drops to single digits.

  2. #2
    turbo addict Turbo Mopar Contributor iTurbo's Avatar
    Join Date
    Dec 2005
    Location
    Gillette, Wyoming
    Posts
    5,384

    Re: Scanner values for total advance

    At WOT, the scanner is reading '9' in the ADV field. My base ignition timing is 12' BTDC. Does that mean my total advance at WOT = 21 degrees? Does that sound normal for the stock TII logic module?

  3. #3
    turbo addict
    Join Date
    Dec 2005
    Location
    Woodville Ala.
    Posts
    1,727

    Re: Scanner values for total advance

    Quote Originally Posted by iTurbo
    At WOT, the scanner is reading '9' in the ADV field. My base ignition timing is 12' BTDC. Does that mean my total advance at WOT = 21 degrees? Does that sound normal for the stock TII logic module?
    What year cal? On my 88 Daytona @ wot & full boost the advance was at 10 (10+12 initial = 22 total), But I also was using a zenor doide that could of caused a slightly higher advance a WOT.

  4. #4
    turbo addict Turbo Mopar Contributor iTurbo's Avatar
    Join Date
    Dec 2005
    Location
    Gillette, Wyoming
    Posts
    5,384

    Re: Scanner values for total advance

    It's '87 TII. I am also using a zener diode; it's adjustable and set just under overboost cutout. I'm at 18 psi right now.

  5. #5
    turbo addict
    Join Date
    Dec 2005
    Location
    Woodville Ala.
    Posts
    1,727

    Re: Scanner values for total advance

    Quote Originally Posted by iTurbo
    It's '87 TII. I am also using a zener diode; it's adjustable and set just under overboost cutout. I'm at 18 psi right now.
    That jives with the readings from my Snap-On my scanner.
    Last edited by glhs875; 06-10-2006 at 10:37 PM.

  6. #6
    turbo addict Turbo Mopar Contributor iTurbo's Avatar
    Join Date
    Dec 2005
    Location
    Gillette, Wyoming
    Posts
    5,384

    Re: Scanner values for total advance

    Cool, thanks for your input!

Similar Threads

  1. TPS and scanner readings
    By iTurbo in forum Electrical & Fuel System
    Replies: 5
    Last Post: 05-28-2006, 10:26 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •