Att: all Rampage/Scamp owners

[jaysshelby]

I am working with a company on getting the lower rear window trim clips reproduced. I had bought the last of what Chrysler had about 5 years ago. So I gave them one today to use for reference. So I'd like to see how many of you would be interested in these so I can give them a rough idea of count so I can get a estimate on reproducing them.

[contraption22]

Can you explain better what this part is? Picture maybe?

[jaysshelby]

ok, these are the clips that hold the wide trim that runs across the bottom of the rear window. first pics is of the clip and in the second pic you can see the clips mounted under the rear window.

[contraption22]

Ah ok I got ya. I will need at least one set. Maybe a second to keep around. How much?

[Turbodave]

I would be interested in a set or two, especially if the price can be kept reasonable (maybe $30 for the set?)

[jaysshelby]

not sure on price yet. want to see who all is interested, to get a rough count to give to them so they can quote me a price to make them.

[jaysshelby]

I would be interested in a set or two, especially if the price can be kept reasonable (maybe $30 for the set?)

thats about where I would like to get them at, so we are on the same page Dave. But want to gauge interest first and I know with the TD community price is always the main factor.

[Turbodave]

thats about where I would like to get them at, so we are on the same page Dave. But want to gauge interest first and I know with the TD community price is always the main factor.

I figured we would be in the same ballpark, I'd definately be in for a set if they were in that range. If it was something like $100 for a set of clips, I'd probably be putting mine back together with big sticky chunk of creativity holding the trim on.

[jaysshelby]

thinkin, I will have them give me a cost to make 50 clips. that way I can get a starting point for cost.

[rare_ram]

I'm interested.

[martin kolner]

as long as you make them you might as well get 500 or so done as the cost is in the tooling not the materials.

[54inches]

I'm with you, probably need to buy a larger quantity. I know I will need the 7 or so.

[jaysshelby]

as long as you make them you might as well get 500 or so done as the cost is in the tooling not the materials.

this is true, but I already had the mold made, it would just be for materials and labor for someone to make them. I will be meeting with them the beginning of next week so I will see what they say.

[4cefedomni]

count me in for a set

[30 PSI SHADOW]

at that point sounds as you should make quite a few! Im in for a set...

[Badger]

I need a set of those please

[tmef]

Me too for a set.

[jaysshelby]

ok here is a pic of the original clips (in white) and the reproduction clips (in black and clear peach color). still waiting to hear back on cost estimate.

[offroadohio]

I need em, so let me know when the price comes

[black86glhs]

ok here is a pic of the original clips (in white) and the reproduction clips (in black and clear peach color). still waiting to hear back on cost estimate.

Those look good Jay.....Thinking the black would be the way to go, although not sure it matters. What plastic is it made of? HDPE or ABS?