Page 1 of 2 12 LastLast
Results 1 to 20 of 23

Thread: TIII shortblock, FWDP 3" turboback, Turbo, A568, TIII parts, SRT4 parts

  1. #1

    TIII shortblock, FWDP 3" turboback, Turbo, A568, TIII parts, SRT4 parts

    Offer's welcomed! I'd prefer to have the transmission, engine, and exhaust picked up as I don't have a truck(trans and engine) and not 100% sure how i'd go about shipping the exhaust(suppose if someone wanted I could remove the rear suspension, wrap it as one piece and ship it that way).

    Head(Lotus).. Great condition, no cracks, steel plugs, valve train included - SOLD to TurboJerry(shipped 4/26/10)

    TIII timing belt covers.. bottom and top. 1 broken tab(lower) and 1 damaged, but complete rab(upper)... Gave to DOHCRT

    Link to broken/damaged tabs...
    http://i581.photobucket.com/albums/s...e/PICT0036.jpg


    FWDP 3" Exhaust.. Turbo back, Walker muffler and magnaflow cat. Will be cut for removal... $250(firm)

    Short Block.. Ready to run, was rebuilt a few owners back, forged slugs(JE), balance shafts deleted, stock rods and crank, brass plugs, crank sprocket and pulley - SOLD to DOHCRT


    TIII Water Pump Diverter & Washer.. SOLD to DOHCRT


    Garrett turbo - TIII, worked when removed, no in and out play typical side to side and no damaged blades. Ready to run $200shipped

    TIII Exhaust Manifold.. No known cracks, and not porting.. $100shipped

    A/C Compressor.. Worked when removed a last summer. Gave to DOHCRT


    A/C-Alternator Bracket.. Good to due the timing belt tensior relocation - Gave to DOHCRT

    91 TIII SBEC.. Stock cal... I removed the elbow when I relocated it to the glove box. - SOLD to DOHCRT

    Rocker Arm shafts and bolts/washers - Ready to use - Gave to DOHCRT

    Camshafter Sprockets - Both intake and exhaust - SOLD to DOHCRT



    TIII water box assembly - SOLD to DOHCRT


    91 A568 Transmission.. No issues shifting, no whines or grinds. - $325(Pending to turbo_III)


    Intake Manifold.. Not ported, comes with throttle body with sensors(new TPS) - SOLD to DOHCRT


    Timing belt idler pulley and tensioner pulley - both are in ready to use condition - Gave to DOHCRT



    FWDP TIII exhaust manifold stud kit.. SOLD to DOHCRT

    TU SS Turbo Lines.. Oil feed and return, coolant feed and return a few thoudsand miles of use - Gave to DOHCRT


    FWDP TIII Intake manifold bolt kit - SOLD to DOHCRT

    Passenger side axle(91+) - Unequal length - $20

    Drive side axle(91+) - $20

    TIII Snorkel.. The metal bracket is gone - $55shipped OBO



    TIII air box assembly, with K&N filter - Gave to DOHCRT


    Vacuum Manifold Block.. McCarter IIRC, Black, 6port(4 on top, 1 on each side) I found 1 fitting to go with it. - SOLD to HESaves


    03-04 SRT4 'Viper' Seats.. Passenger side is in good condition, Driver side bolster needs repaired - SOLD to DOHCRT

    03-04 SRT4 radio/HVAC bezel.. $45shipped
    Last edited by moparfwdsleeper; 05-27-2010 at 08:33 PM.

  2. #2

    Re: TIII shortblock, FWDP 3" turboback, Turbo, A568, TIII parts, SRT4 parts




  3. #3
    turbo addict Turbo Mopar Contributor iTurbo's Avatar
    Join Date
    Dec 2005
    Location
    Gillette, Wyoming
    Posts
    5,384

    Re: TIII shortblock, FWDP 3" turboback, Turbo, A568, TIII parts, SRT4 parts

    Hey Clayton, I would love to have that shortblock, but I go in for hernia surgery tomorrow morning and probably won't be back to 100% for a few weeks. Any way you could see about freight up here?

    Last time I tried to have a TIII shortblock shipped it was crazy expensive so I ended up driving down to SLC myself to get it. If I have a fast recovery I may go down there for the shortblock and exhaust system but you don't have to hold them for me.

  4. #4

    Re: TIII shortblock, FWDP 3" turboback, Turbo, A568, TIII parts, SRT4 parts

    I have no way to ship it, otherwise I would.

  5. #5

    Re: TIII shortblock, FWDP 3" turboback, Turbo, A568, TIII parts, SRT4 parts

    Do you have shift cables, shifter, clutch and flywheel for the A568?

    -Les

  6. #6

    Re: TIII shortblock, FWDP 3" turboback, Turbo, A568, TIII parts, SRT4 parts

    I have shifter, cables, and clutch. But no flywheel.

  7. #7
    Mitsu booster
    Join Date
    Jan 2010
    Location
    Kenosha, Wisconsin
    Posts
    34

    Re: TIII shortblock, FWDP 3" turboback, Turbo, A568, TIII parts, SRT4 parts

    I'll take the Vacuum block please.
    Shipping to 53142?
    Thanks!

    <><
    Sean

  8. #8

    Re: TIII shortblock, FWDP 3" turboback, Turbo, A568, TIII parts, SRT4 parts

    FIRST POST IS NOW UPDATED!

    Quote Originally Posted by HESaves View Post
    I'll take the Vacuum block please.
    Shipping to 53142?
    Thanks!

    <><
    Sean
    Sean, thanks! Price is $25shipped. I sent you a PM as well

  9. #9
    Mitsu booster
    Join Date
    Jan 2010
    Location
    Kenosha, Wisconsin
    Posts
    34

    Re: TIII shortblock, FWDP 3" turboback, Turbo, A568, TIII parts, SRT4 parts

    Got your Pm but I don't have enough posts to reply so if you PM me your PayPal addy then I'll send the cash your way right away.

    <><
    Sean

  10. #10

    Re: TIII shortblock, FWDP 3" turboback, Turbo, A568, TIII parts, SRT4 parts

    I forgot about the post limit, you SiR have a PM

  11. #11
    Hybrid booster
    Join Date
    Jul 2008
    Location
    Valley Stream NY
    Posts
    275

    Re: TIII shortblock, FWDP 3" turboback, Turbo, A568, TIII parts, SRT4 parts

    do you think you could get me a shipping price for A568 to 11580, no promises, but if the shipping is reasonable I'd love to take that off your hands. Contact me direct please QFRB97@optonline.net

  12. #12

    Re: TIII shortblock, FWDP 3" turboback, Turbo, A568, TIII parts, SRT4 parts

    Quote Originally Posted by ChargedDust View Post
    do you think you could get me a shipping price for A568 to 11580, no promises, but if the shipping is reasonable I'd love to take that off your hands. Contact me direct please QFRB97@optonline.net
    I have no way to get it to a UPS or FedEx. It will fit in my neon without being crated up, but when you throw a crate into it there isn't a way.

    Sorry.

  13. #13
    Garrett booster Turbo Mopar Contributor
    Join Date
    Feb 2007
    Location
    Ohio
    Posts
    219

    Re: TIII shortblock, FWDP 3" turboback, Turbo, A568, TIII parts, SRT4 parts

    Can ship in a large rubbermaid tote with small holes drilled to ziptie the lid on. If I had extra cash Id be all over it!

  14. #14

    Re: TIII shortblock, FWDP 3" turboback, Turbo, A568, TIII parts, SRT4 parts

    Quote Originally Posted by TonaChris View Post
    Can ship in a large rubbermaid tote with small holes drilled to ziptie the lid on. If I had extra cash Id be all over it!
    i suppose that could fit in my car lol. thanks for the imput

    If someone is serious about buying it, I would do this.

  15. #15
    Super Moderator Turbo Mopar Staff 135sohc's Avatar
    Join Date
    Aug 2008
    Location
    SoMd
    Posts
    6,178

    Re: TIII shortblock, FWDP 3" turboback, Turbo, A568, TIII parts, SRT4 parts

    I expressed interest before but you said it was already sold ?

    The rubbermaid container shipping works great. just put lots of padding inside so it doesnt shift around.

  16. #16
    turbo addict
    Join Date
    May 2007
    Location
    Roanoke, Virginia, United Stat
    Posts
    1,771

    Re: TIII shortblock, FWDP 3" turboback, Turbo, A568, TIII parts, SRT4 parts

    You may want to put a price on your seats

  17. #17

    Re: TIII shortblock, FWDP 3" turboback, Turbo, A568, TIII parts, SRT4 parts

    Quote Originally Posted by 135sohc View Post
    I expressed interest before but you said it was already sold ?

    The rubbermaid container shipping works great. just put lots of padding inside so it doesnt shift around.
    I may have told you that cause Cindy and I are talking about doing a parts swap. If your still interested I now have a way to ship it and it's not in Spring, TX yet and nothing is set between us...

    Thanks for adding more info on using the tote

    Quote Originally Posted by badandy View Post
    You may want to put a price on your seats
    there already sold. i thought i put 'SOLD to DOHCRT', i'll correct the OP thanks!

  18. #18

    Re: TIII shortblock, FWDP 3" turboback, Turbo, A568, TIII parts, SRT4 parts

    bump for price changes!

  19. #19
    Garrett booster
    Join Date
    Aug 2009
    Location
    Winnipeg, MB, Canada
    Posts
    112

    Re: TIII shortblock, FWDP 3" turboback, Turbo, A568, TIII parts, SRT4 parts

    Sent PM about trans!

  20. #20

    Re: TIII shortblock, FWDP 3" turboback, Turbo, A568, TIII parts, SRT4 parts

    replied

Page 1 of 2 12 LastLast

Similar Threads

  1. Replies: 5
    Last Post: 11-18-2006, 11:24 PM
  2. Holset turbo, manual rack, TIII parts, ...
    By SCalder in forum Parts For Sale
    Replies: 27
    Last Post: 03-25-2006, 11:00 AM
  3. Various Turbo I parts for sale
    By minigts in forum Parts For Sale
    Replies: 9
    Last Post: 02-21-2006, 02:46 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •