Page 4 of 29 FirstFirst 1234567814 ... LastLast
Results 61 to 80 of 573

Thread: MPScan

  1. #61
    Moderator Turbo Mopar Staff Force Fed Mopar's Avatar
    Join Date
    Dec 2005
    Location
    Greenville/Spartanburg SC area
    Posts
    7,557

    Re: MPScan

    Okay so I downloaded MPScan, downloaded the update for it. Where do I find the config file it asks for? For the grid I mean.
    Rob M.
    '89 Turbo GTC

    2.5 TIII stroker, 568 w/ OBX and 3.77 FD

  2. #62
    Supporting Member Turbo Mopar Contributor
    Join Date
    Jun 2006
    Location
    Spearfish SD
    Posts
    2,038

    Re: MPScan

    -select -> setups - grid - new - open a lst file (created when u compile).
    -press insert and select the ram locations (* means preconfigured) set other settings if needed.
    -set the display order (1-12 i think for each gauge type - been awhile!)
    -save

    -select -> display - grid

    should show u the grid u created. press record.

    i never got it to work very well using the usb stuff, always used the 9600 baud serial converter. couple things i needed to do in the com routines for the usb stuff that i never got done (basically some purging commands which the old vb6 made kinda difficult).

  3. #63
    Moderator Turbo Mopar Staff Force Fed Mopar's Avatar
    Join Date
    Dec 2005
    Location
    Greenville/Spartanburg SC area
    Posts
    7,557

    Re: MPScan

    Hmm, well I've about halfway got it lol. When I get my ftdi cable I'll play around w/ it some more, get it figured out. Can't figure out how to setup the gauges, and where I load a grid under display it only shows one slot?
    Rob M.
    '89 Turbo GTC

    2.5 TIII stroker, 568 w/ OBX and 3.77 FD

  4. #64
    Supporting Member Turbo Mopar Contributor
    Join Date
    Jun 2006
    Location
    Spearfish SD
    Posts
    2,038

    Re: MPScan

    the grid under display will only show those ram locations in which there was a display order AND a short name setup in the grid setup screen. The gauges are a fixed gauge style for each TYPE of gauge. you'll see once u get it working.

    btw, i think you will like version 2 alot better. i have the usb stuff working well. plus, it allows custom graphs/skins to be used as well as being able to place the graphs where u want vs a fixed location (similar to logworks3). i probably won't have it done until late june sometime (i hope).

  5. #65
    Moderator Turbo Mopar Staff Force Fed Mopar's Avatar
    Join Date
    Dec 2005
    Location
    Greenville/Spartanburg SC area
    Posts
    7,557

    Re: MPScan

    Quote Originally Posted by wowzer View Post
    the grid under display will only show those ram locations in which there was a display order AND a short name setup in the grid setup screen. The gauges are a fixed gauge style for each TYPE of gauge. you'll see once u get it working.

    btw, i think you will like version 2 alot better. i have the usb stuff working well. plus, it allows custom graphs/skins to be used as well as being able to place the graphs where u want vs a fixed location (similar to logworks3). i probably won't have it done until late june sometime (i hope).
    Gotcha.

    You mean MPTuner V2? It's gonna have the scan, bin stacker etc all in one program right? I've been using the bin stacker a bunch
    Rob M.
    '89 Turbo GTC

    2.5 TIII stroker, 568 w/ OBX and 3.77 FD

  6. #66
    Supporting Member Turbo Mopar Contributor
    Join Date
    Jun 2006
    Location
    Spearfish SD
    Posts
    2,038

    Re: MPScan

    No - MPScan v2. All that MPTune v2 does is allows u to edit the .asm file ram locations (scanner setup) that will be used by MPScan. MOST people will never use this other than Rob when he sets up/modifies the .asm file.

    btw, do u use the bin stacker to burn the chip also? what do u have for a burner?

  7. #67
    Moderator Turbo Mopar Staff Force Fed Mopar's Avatar
    Join Date
    Dec 2005
    Location
    Greenville/Spartanburg SC area
    Posts
    7,557

    Re: MPScan

    No, I haven't tried the burning feature yet. I am using a Moates Burn2. I wasn't sure the burn function in MPTuner2 was working.

    BTW I didn't see anything marked w/ a * in grid setup.
    Rob M.
    '89 Turbo GTC

    2.5 TIII stroker, 568 w/ OBX and 3.77 FD

  8. #68
    Supporting Member Turbo Mopar Contributor
    Join Date
    Jun 2006
    Location
    Spearfish SD
    Posts
    2,038

    Re: MPScan

    ok - i'm getting confused :-)

    mptuner (v1) does NOT support the burn2
    MPTune (v2) will support the burn2
    MPBinstacker currently supports the burn2

    MPScan (v1) - when u open the grid setup screen, click new, and load up a .lst file, and press the insert key to add an ecu location, the drop down list shows u all the ram locations. any locations that rob has preset up will show with an "*" in front of the location name.

    MPScan (v2) - still working on it!!

  9. #69
    Moderator Turbo Mopar Staff Force Fed Mopar's Avatar
    Join Date
    Dec 2005
    Location
    Greenville/Spartanburg SC area
    Posts
    7,557

    Re: MPScan

    MPScan (v1) - when u open the grid setup screen, click new, and load up a .lst file, and press the insert key to add an ecu location, the drop down list shows u all the ram locations. any locations that rob has preset up will show with an "*" in front of the location name.
    This is what I did, but none of what popped up had an asterisk on it.

    Here is what I am currently doing:

    Make a set of cals w/ MPTuner (v1)
    Put them into a stack using MPBinstacker in MPTuner (v2)
    Burn it to a chip w/ a Burn2 using the TunerPro Flash & Burn program
    Rob M.
    '89 Turbo GTC

    2.5 TIII stroker, 568 w/ OBX and 3.77 FD

  10. #70
    Supporting Member Turbo Mopar Contributor
    Join Date
    Jun 2006
    Location
    Spearfish SD
    Posts
    2,038

    Re: MPScan

    do u have the latest version of the binstacker program? it should allow u to burn directly to the chip using a burn2. the way u can tell is to have your burn2 plugged in the usb and when u start the binstacker program it should give u a message on the bottom that it found it. if u get that message u can directly read/write the chip using mpbinstacker by clicking the match icon for burn (cute huh!) or the glasses icon for read.

  11. #71
    Supporting Member Turbo Mopar Contributor
    Join Date
    Jun 2006
    Location
    Spearfish SD
    Posts
    2,038

    Re: MPScan

    i uploaded the mpbinstacker programs to the first post under the mptuner discussion in case u need them.

  12. #72
    Supporting Member Turbo Mopar Contributor
    Join Date
    Jun 2006
    Location
    Spearfish SD
    Posts
    2,038

    Re: MPScan

    Click image for larger version. 

Name:	RamList.JPG 
Views:	175 
Size:	30.9 KB 
ID:	31169 This is the screen i am talking about

  13. #73
    Moderator Turbo Mopar Staff Force Fed Mopar's Avatar
    Join Date
    Dec 2005
    Location
    Greenville/Spartanburg SC area
    Posts
    7,557

    Re: MPScan

    Quote Originally Posted by wowzer View Post
    do u have the latest version of the binstacker program? it should allow u to burn directly to the chip using a burn2. the way u can tell is to have your burn2 plugged in the usb and when u start the binstacker program it should give u a message on the bottom that it found it. if u get that message u can directly read/write the chip using mpbinstacker by clicking the match icon for burn (cute huh!) or the glasses icon for read.
    Quote Originally Posted by wowzer View Post
    i uploaded the mpbinstacker programs to the first post under the mptuner discussion in case u need them.
    I dunno, I'm just using the stacker in the MPTuner V2 prototype I got from you several months ago. I'll get the one from the MPTuner thread and try it.

    ---------- Post added at 06:09 PM ---------- Previous post was at 06:08 PM ----------

    Quote Originally Posted by wowzer View Post
    Click image for larger version. 

Name:	RamList.JPG 
Views:	175 
Size:	30.9 KB 
ID:	31169 This is the screen i am talking about
    Yeah that's the screen, but nothing has the * on it. I'm using the latest T-LM version, maybe he doesn't have that set up for it.
    Rob M.
    '89 Turbo GTC

    2.5 TIII stroker, 568 w/ OBX and 3.77 FD

  14. #74
    Supporting Member Turbo Mopar Contributor
    Join Date
    Jun 2006
    Location
    Spearfish SD
    Posts
    2,038

    Re: MPScan

    thought i would bump this to let everyone know that i released ver 2 a while back. its set up a bit differently but does seem to work well with the usb and rs232 stuff. i got a bit of tweaking to do but i'll add to it as requests come in. just read thru the help. i included several gauge layouts and am open to creating others. the gauges can be modified quite a bit. just need to play with it.

    lmk what ya think.
    89 Voyager LE, 2.5T2 - rest in peace
    87 Charger Shelby T2 (2.4 conversion in process)

  15. #75
    Moderator Turbo Mopar Staff Force Fed Mopar's Avatar
    Join Date
    Dec 2005
    Location
    Greenville/Spartanburg SC area
    Posts
    7,557

    Re: MPScan

    I gotta get a new laptop/netbook and start using this...
    Rob M.
    '89 Turbo GTC

    2.5 TIII stroker, 568 w/ OBX and 3.77 FD

  16. #76
    Supporting Member Turbo Mopar Contributor
    Join Date
    Jun 2006
    Location
    Spearfish SD
    Posts
    2,038

    Re: MPScan

    thought i would post a screen shot fwiw. shows all the current gauge types. each gauge can be completely customized as far as colors, fonts, formats, etc.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	MPScan2.JPG 
Views:	125 
Size:	115.0 KB 
ID:	37019   Click image for larger version. 

Name:	MPScan2a.JPG 
Views:	115 
Size:	114.2 KB 
ID:	37020   Click image for larger version. 

Name:	MPScan2b.JPG 
Views:	113 
Size:	108.4 KB 
ID:	37021  
    Last edited by wowzer; 01-24-2012 at 03:46 PM.
    89 Voyager LE, 2.5T2 - rest in peace
    87 Charger Shelby T2 (2.4 conversion in process)

  17. #77
    Moderator Turbo Mopar Staff Force Fed Mopar's Avatar
    Join Date
    Dec 2005
    Location
    Greenville/Spartanburg SC area
    Posts
    7,557

    Re: MPScan

    I like it!
    Rob M.
    '89 Turbo GTC

    2.5 TIII stroker, 568 w/ OBX and 3.77 FD

  18. #78
    boostaholic bfarroo's Avatar
    Join Date
    Dec 2005
    Location
    Green Bay WI
    Posts
    1,440

    Re: MPScan

    OK I've gone through and setup the table pulled from MPTune. I setup the dashboard and have that all ready to go. Now when I try to open up a program to log I don't have the option to pick a MPc only a MPI. Any ideas what I'm doing wrong? How do I open up a dashboard to log?

  19. #79
    Visit www.boostbutton.com... Turbo Mopar Contributor ShelGame's Avatar
    Join Date
    Dec 2005
    Location
    Whitmore Lake, Michigan, Unite
    Posts
    9,918

    Re: MPScan

    Hmm, I'm not seeing it either...

    EDIT: Ohhh, I see now. You have to have a valid port or it assumes you're not going to log and only lets you open a previously recorded session. Plug in the FTDI cable BEFORE opening MP Scan 2...
    https://db.tt/SV7ONZpQ
    Rob Lloyd
    '89 Daytona C/S

    2.5 T1 Auto
    13.24 @ 100.5mph
    NHRA #3728 AF/S

    boostbutton.com
    tuning wiki

  20. #80
    boostaholic bfarroo's Avatar
    Join Date
    Dec 2005
    Location
    Green Bay WI
    Posts
    1,440

    Re: MPScan

    Ah, makes sense. I'll have to give it a whirl tomorrow. BTW the flash module is awesome. I don't know why anyone would bother pulling the chip out and messing with a burner.

Page 4 of 29 FirstFirst 1234567814 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •