Page 1 of 2 12 LastLast
Results 1 to 20 of 25

Thread: Holset HE341 with DP ready to go!

  1. #1
    Supporting Member Turbo Mopar Contributor rx2mazda's Avatar
    Join Date
    Apr 2006
    Location
    Baltimore,MD
    Posts
    2,925

    Holset HE341 with DP ready to go!

    Having to go a different route on my GLH-R/T so my Holset is for sale. Worked perfect when I pulled the motor from my Spirit. I made 377whp and 401trq with this turbo around 26psi and that was with a crappy FMIC and too much fuel. Comes fully modded and ready to rock! Tig welded WG actuator bracket and the WG hole was machined out nice to help control boost.

    This is like a turbo kit, comes with SS oil supply line, WG actuator, DP with two 02 bungs(heat wrapped, two v-bands), 4-wire 02 sensor, and screen filter. Turbo also comes with rebuild kit from GPopshop that I bought when I got the turbo but never needed to use. 450.00 + shipping and paypal fee.









    Carroll

    SILVER, 85 GLH-R/T, TIII powered, Fueltech, ID1300's. PTE5857
    RED, 91 Spirit R/T - Holset HE351 - 12.6 @ 107...R.I.P.



  2. #2
    Garrett booster
    Join Date
    Aug 2008
    Location
    Ma
    Posts
    101

    Re: Holset HE341 with DP ready to go!

    hi are you selling it because it wont fit in a l-body! i have a l body? i might be interested, thanks Doug.

  3. #3
    Bad Mother Flecker Turbo Mopar Staff fleckster's Avatar
    Join Date
    Dec 2005
    Location
    Arcadia, IN (just N of Indy)
    Posts
    2,607

    Re: Holset HE341 with DP ready to go!

    Wow that sure would be sweet in my silver Spirit R/T, Carroll! I wonder what all I'd have to change to swap it in...hmmm...pm coming.

    John M. Fleck

    '83 Dodge Rampage 2.2 w/ 2.5L Turbo 14.79@94
    '87 Shelby Lancer #213 14.99@94
    '89 Chrysler LeBaron GT Turbo 'vert 15.88@92
    '92 Dodge Spirit R/T 13.50@104 ; 13.34@102 on slicks
    '98 Dodge Neon R/T 15.66@89
    '03 Dodge SRT-4 13.91@98

  4. #4
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: Holset HE341 with DP ready to go!

    Do you have more pics of the DP, need to fab something up, thanks,
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  5. #5
    Supporting Member Turbo Mopar Contributor rx2mazda's Avatar
    Join Date
    Apr 2006
    Location
    Baltimore,MD
    Posts
    2,925

    Re: Holset HE341 with DP ready to go!

    Quote Originally Posted by domni058 View Post
    hi are you selling it because it wont fit in a l-body! i have a l body? i might be interested, thanks Doug.
    No, it fit fine! I didn't have to touch the firewall at all. Just going a different route.

    Quote Originally Posted by fleckster View Post
    Wow that sure would be sweet in my silver Spirit R/T, Carroll! I wonder what all I'd have to change to swap it in...hmmm...pm coming.
    reply coming.
    Carroll

    SILVER, 85 GLH-R/T, TIII powered, Fueltech, ID1300's. PTE5857
    RED, 91 Spirit R/T - Holset HE351 - 12.6 @ 107...R.I.P.



  6. #6
    Supporting Member Turbo Mopar Contributor rx2mazda's Avatar
    Join Date
    Apr 2006
    Location
    Baltimore,MD
    Posts
    2,925

    Re: Holset HE341 with DP ready to go!

    Quote Originally Posted by turbovanman View Post
    Do you have more pics of the DP, need to fab something up, thanks,
    Car is at Brian's in Philly, I'll be there on Wednesday and I can snap some for you
    Carroll

    SILVER, 85 GLH-R/T, TIII powered, Fueltech, ID1300's. PTE5857
    RED, 91 Spirit R/T - Holset HE351 - 12.6 @ 107...R.I.P.



  7. #7
    The moderately moderate moderator Turbo Mopar Staff
    Join Date
    Dec 2006
    Location
    Akron, Ohio
    Posts
    6,870

    Re: Holset HE341 with DP ready to go!

    I would be willing to see how much of a dog it is on an 8v Omni as.....cough, cough........research. Maybe I can get a government grant to do it....lol.
    Bryan
    86 GLHS #161, 2016 Impala
    SDAC National Member, SDAC Buckeye Chapter Member

    A man has got to know his limitations.....

  8. #8
    Supporting Member Turbo Mopar Contributor glhs727's Avatar
    Join Date
    Dec 2005
    Location
    Spring, Texas
    Posts
    2,168

    Re: Holset HE341 with DP ready to go!

    These holsets rock!!! not much lag for a big turbo and they flow tons of air. With the matching downpipe piece, it is a bolt on for a t-3 motor. This is a great deal and someone should jump on it soon. The downpipe alone would be $300+, so $450 for a bolt on set-up is a killer deal!!!
    FWD Performance is a performance shop with a significant investment in this market. We pride oursleves with a hard work ethic, friendly customer service, and honest business dealings with no hidden fees. FWD Performance, Real Race Products by Real Racers.

  9. #9
    Hybrid booster
    Join Date
    Jun 2008
    Location
    Kenilworth, NJ
    Posts
    936

    Re: Holset HE341 with DP ready to go!

    Of course I reply on the forum no one is looking at...

  10. #10
    Garrett booster
    Join Date
    Aug 2008
    Location
    Ma
    Posts
    101

    Re: Holset HE341 with DP ready to go!

    PM sent! let me know, thanks Doug.

  11. #11
    Garrett booster
    Join Date
    Jun 2009
    Location
    Omaha, Nebraska
    Posts
    70

    Re: Holset HE341 with DP ready to go!

    PM sent, thanks

  12. #12
    turbo addict
    Join Date
    Aug 2008
    Location
    Wallkill, New York, United Sta
    Posts
    2,486

    Re: Holset HE341 with DP ready to go!

    wow this is a steal. If its not sold by the time i get the extra dough i will def grab it man.

  13. #13
    Supporting Member Turbo Mopar Contributor rx2mazda's Avatar
    Join Date
    Apr 2006
    Location
    Baltimore,MD
    Posts
    2,925

    Re: Holset HE341 with DP ready to go!

    Quote Originally Posted by glhs727 View Post
    These holsets rock!!! not much lag for a big turbo and they flow tons of air. With the matching downpipe piece, it is a bolt on for a t-3 motor. This is a great deal and someone should jump on it soon. The downpipe alone would be $300+, so $450 for a bolt on set-up is a killer deal!!!
    Thanks
    Carroll

    SILVER, 85 GLH-R/T, TIII powered, Fueltech, ID1300's. PTE5857
    RED, 91 Spirit R/T - Holset HE351 - 12.6 @ 107...R.I.P.



  14. #14
    Hybrid booster
    Join Date
    Dec 2005
    Location
    Crown Point, IN
    Posts
    395

    Re: Holset HE341 with DP ready to go!

    whats the MINIMUM boost your able to run with this turbo setup?

  15. #15
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: Holset HE341 with DP ready to go!

    Quote Originally Posted by CaptMoe View Post
    Of course I reply on the forum no one is looking at...
    Why would you reply on it?
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  16. #16
    Hybrid booster
    Join Date
    Jun 2008
    Location
    Kenilworth, NJ
    Posts
    936

    Re: Holset HE341 with DP ready to go!

    Quote Originally Posted by turbovanman View Post
    Why would you reply on it?
    I don't know...

  17. #17
    Supporting Member Turbo Mopar Contributor rx2mazda's Avatar
    Join Date
    Apr 2006
    Location
    Baltimore,MD
    Posts
    2,925

    Re: Holset HE341 with DP ready to go!

    Quote Originally Posted by yogurt_slinger View Post
    whats the MINIMUM boost your able to run with this turbo setup?
    About 15
    Carroll

    SILVER, 85 GLH-R/T, TIII powered, Fueltech, ID1300's. PTE5857
    RED, 91 Spirit R/T - Holset HE351 - 12.6 @ 107...R.I.P.



  18. #18
    Supporting Member II Turbo Mopar Contributor DOHCRT's Avatar
    Join Date
    Dec 2005
    Location
    Phoenix, Az
    Posts
    512

    Re: Holset HE341 with DP ready to go!

    You have 2 PM's...got any valve covers? (TIII)

    Vic in Phoenix

    92 Spirit R/T
    89 CSX
    88 CSX-TIII
    87 CSX
    87 Shelby Lancer (Flying to Pieces)
    84 Rampage TII
    97 Ram Diesel
    69 Dart GT 'Vert
    73 Dart Sport (For Sale)

  19. #19
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: Holset HE341 with DP ready to go!

    Quote Originally Posted by DOHCRT View Post
    You have 2 PM's...got any valve covers? (TIII)

    Vic in Phoenix

    92 Spirit R/T
    89 CSX
    88 CSX-TIII
    87 CSX
    87 Shelby Lancer (Flying to Pieces)
    84 Rampage TII
    97 Ram Diesel
    69 Dart GT 'Vert
    73 Dart Sport (For Sale)
    Didn't you get my PM?
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  20. #20
    boostaholic
    Join Date
    Oct 2006
    Location
    Southern Wisconsin
    Posts
    1,043

    Re: Holset HE341 with DP ready to go!

    Quote Originally Posted by yogurt_slinger View Post
    whats the MINIMUM boost your able to run with this turbo setup?
    Hey Bryan,this is your old turbo! lol

    Free bump

Page 1 of 2 12 LastLast

Similar Threads

  1. Turbos/Intercoolers WTB: Holset HE341
    By Dan15 in forum Parts Wanted
    Replies: 7
    Last Post: 06-24-2010, 01:40 PM
  2. Any intrest in ready to install new upholstery?
    By Mopar318 in forum Group Buys
    Replies: 150
    Last Post: 06-10-2010, 01:28 PM
  3. Turbos/Intercoolers WTB Holset HE351CW
    By navyboy65 in forum Parts Wanted
    Replies: 2
    Last Post: 01-26-2010, 03:49 PM
  4. Holsets, who's running them and at what boost?
    By Darkapollo in forum Turbos & Intercoolers!
    Replies: 26
    Last Post: 02-06-2009, 07:31 PM
  5. Holset sizing info!
    By turbovanmanČ in forum Old FAQ Info
    Replies: 4
    Last Post: 05-19-2007, 07:03 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •