Page 1 of 4 1234 LastLast
Results 1 to 20 of 63

Thread: BoostButton.com

  1. #1
    Visit www.boostbutton.com... Turbo Mopar Contributor ShelGame's Avatar
    Join Date
    Dec 2005
    Location
    Whitmore Lake, Michigan, Unite
    Posts
    9,918

    BoostButton.com

    Our new website is pretty much ready. There's still a bit of polishing to do, but it's basically all done. Check it out if you have time - BoostButton.com

    Right now, we only have the current services available (chip burning and socketeing). But, I will be adding a few products soon (hopefully this weekend) - Chips, sockets, and SBEC chip adapters to begin with. Flashable computers and more as we get them ready to go.

    Of course, anyone can still contact me via PM or e-mail.

    Thanks again for everyone's support.
    https://db.tt/SV7ONZpQ
    Rob Lloyd
    '89 Daytona C/S

    2.5 T1 Auto
    13.24 @ 100.5mph
    NHRA #3728 AF/S

    boostbutton.com
    tuning wiki

  2. #2
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,688

    Re: BoostButton.com

    AWESOME!

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  3. #3
    TurboII
    Guest

    Re: BoostButton.com

    nice web!

  4. #4
    turbo addict
    Join Date
    Jan 2007
    Location
    South Gillies, ON. Canada
    Posts
    2,923

    Re: BoostButton.com

    good domain name. the buttons could use some work, but awesome more Chrysler support I hope you make piles of money.
    1988 Lancer Shelby 2.2TII 1989 Shadow ES 2.5TI 1992 Lebaron Sedan 3.0Auto 1993 Acclaim 2.5TI-A520 Hoard parts now!

  5. #5
    Visit www.boostbutton.com... Turbo Mopar Contributor ShelGame's Avatar
    Join Date
    Dec 2005
    Location
    Whitmore Lake, Michigan, Unite
    Posts
    9,918

    Re: BoostButton.com

    Yeah, I know. We're just using our providers template for now. I would have liked to have something more custom, but you gotta start somewhere...
    https://db.tt/SV7ONZpQ
    Rob Lloyd
    '89 Daytona C/S

    2.5 T1 Auto
    13.24 @ 100.5mph
    NHRA #3728 AF/S

    boostbutton.com
    tuning wiki

  6. #6
    turbo addict Turbo Mopar Contributor
    Join Date
    Jan 2006
    Location
    WV
    Posts
    1,812

    Re: BoostButton.com

    Nice looking website!

  7. #7
    Super Moderator Turbo Mopar Staff contraption22's Avatar
    Join Date
    Dec 2005
    Location
    Havertown, PA
    Posts
    9,517

    Re: BoostButton.com

    Pretty cool!

    Any experience with 2.4L's on SMEC electronics?

    Thanks,

    Mike
    Mike Marra
    1986 Plymouth Horizon GLMF "The Contraption" < entertaining sponsorship offers
    Project Log:
    http://www.turbo-mopar.com/forums/showthread.php?69708-The-Contraption-2013-14&highlight=

  8. #8
    Visit www.boostbutton.com... Turbo Mopar Contributor ShelGame's Avatar
    Join Date
    Dec 2005
    Location
    Whitmore Lake, Michigan, Unite
    Posts
    9,918

    Re: BoostButton.com

    Quote Originally Posted by contraption22 View Post
    Pretty cool!

    Any experience with 2.4L's on SMEC electronics?

    Thanks,

    Mike
    I just did a 2.4 SBEC cal for Sean - http://www.turbo-mopar.com/forums/sh...ad.php?t=47188

    No idea how it works yet. SMEC would have been easier actually...
    https://db.tt/SV7ONZpQ
    Rob Lloyd
    '89 Daytona C/S

    2.5 T1 Auto
    13.24 @ 100.5mph
    NHRA #3728 AF/S

    boostbutton.com
    tuning wiki

  9. #9
    Supporting Member Turbo Mopar Contributor zin's Avatar
    Join Date
    May 2006
    Location
    ca
    Posts
    4,479

    Re: BoostButton.com

    Quote Originally Posted by ShelGame View Post
    Yeah, I know. We're just using our providers template for now. I would have liked to have something more custom, but you gotta start somewhere...
    That's not a bad way to go at all! Does the template include the "shopping cart" web-commerce side of things?

    These kinds of templates are great, as a lot of people can do a great graphical web page for you, but don't have the first clue how to correctly/safely implement the actual biz side of things.... Trust me on this!

    It's a great start, hope you can expand it to become a good money maker!

    Mike
    "The Constitution is not an instrument for the government to restrain the people, it is an instrument for the people to restrain the government - lest it come to dominate our lives and interests." - Patrick Henry

    Bad laws are the worst sort of tyranny.
    - Edmund Burke

  10. #10

    Re: BoostButton.com

    What would the cost be if you did a cal and emailed? I have my own EPROM burner, EPROMsand UV eraser.
    James Dempsey Jr 91 Dodge Shadow ES convertible 95 Dodge Neon Sport sedan 2.4 5spd

  11. #11
    Hybrid booster
    Join Date
    Oct 2009
    Location
    Robins AFB, GA
    Posts
    645

    Re: BoostButton.com

    Sweet!!

    So if I wanted a custom Logic Module to plug into the GLH would I go to ECU socketing, Chip Burning, or Custom ECU Code?

    The GLH is my first project car(im only 19) so I dont know all the specs on my engine yet. All I know is its a stock '88 Shelby Z engine with a stock Garret T2 turbo with the 2½ swingvalve.

  12. #12
    Visit www.boostbutton.com... Turbo Mopar Contributor ShelGame's Avatar
    Join Date
    Dec 2005
    Location
    Whitmore Lake, Michigan, Unite
    Posts
    9,918

    Re: BoostButton.com

    Quote Originally Posted by inmyshadow View Post
    What would the cost be if you did a cal and emailed? I have my own EPROM burner, EPROMsand UV eraser.
    Previoulsy, I've done those for free. The problems is, there's not much pressure to finish the free cals . With the 'new' company, I think I'm goingto charge a fee for the cal itself, and price the chip accordingly. Probably $20 for the cal itslef.
    https://db.tt/SV7ONZpQ
    Rob Lloyd
    '89 Daytona C/S

    2.5 T1 Auto
    13.24 @ 100.5mph
    NHRA #3728 AF/S

    boostbutton.com
    tuning wiki

  13. #13
    Visit www.boostbutton.com... Turbo Mopar Contributor ShelGame's Avatar
    Join Date
    Dec 2005
    Location
    Whitmore Lake, Michigan, Unite
    Posts
    9,918

    Re: BoostButton.com

    Quote Originally Posted by BoostedDrummer View Post
    Sweet!!

    So if I wanted a custom Logic Module to plug into the GLH would I go to ECU socketing, Chip Burning, or Custom ECU Code?

    The GLH is my first project car(im only 19) so I dont know all the specs on my engine yet. All I know is its a stock '88 Shelby Z engine with a stock Garret T2 turbo with the 2½ swingvalve.
    Well, in actuality, the way our cart is setup, you'd need a socket job, a chip, and a custom cal. I think it should add all of that automatically when you select 'ECU Socketeing'.
    https://db.tt/SV7ONZpQ
    Rob Lloyd
    '89 Daytona C/S

    2.5 T1 Auto
    13.24 @ 100.5mph
    NHRA #3728 AF/S

    boostbutton.com
    tuning wiki

  14. #14
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,441

    Re: BoostButton.com

    Congrats Rob. I hope you do really well with this.

  15. #15
    boostaholic Turbo Mopar Contributor
    Join Date
    Mar 2008
    Location
    Arizona Bay
    Posts
    1,097

    Re: BoostButton.com

    Hell yeah. I hope it works out well for you (and your wife!). That's the least this community can do for someone who has given so much.

  16. #16
    turbo addict
    Join Date
    Jan 2008
    Location
    Squamish BC
    Posts
    3,618

    Re: BoostButton.com

    Nice site rob
    Still want to do a 94 SBEC 3.ol cal turbo cal . I didn't see a listing for 3.ol in your spec sheet.

  17. #17
    Supporting Member Turbo Mopar Contributor j4278h's Avatar
    Join Date
    Dec 2005
    Location
    michigan 49045
    Posts
    2,086

    Re: BoostButton.com

    Rob need some core ecu's?

    Will the v6 computers work for a core for the 4cylinder turbo?

  18. #18
    Visit www.boostbutton.com... Turbo Mopar Contributor ShelGame's Avatar
    Join Date
    Dec 2005
    Location
    Whitmore Lake, Michigan, Unite
    Posts
    9,918

    Re: BoostButton.com

    Quote Originally Posted by j4278h View Post
    Rob need some core ecu's?

    Will the v6 computers work for a core for the 4cylinder turbo?
    Yes! I do need cores. PM me what you have and what you want for them. The V6 SMEC can be used to run a turbo. SBEC, not sure. I'd actually take anything at this point, I plan to even be able to tune TBI computers for the roundy-roundy guys.
    https://db.tt/SV7ONZpQ
    Rob Lloyd
    '89 Daytona C/S

    2.5 T1 Auto
    13.24 @ 100.5mph
    NHRA #3728 AF/S

    boostbutton.com
    tuning wiki

  19. #19
    Supporting Member Turbo Mopar Contributor j4278h's Avatar
    Join Date
    Dec 2005
    Location
    michigan 49045
    Posts
    2,086

    Re: BoostButton.com

    Quote Originally Posted by ShelGame View Post
    Yes! I do need cores. PM me what you have and what you want for them. The V6 SMEC can be used to run a turbo. SBEC, not sure. I'd actually take anything at this point, I plan to even be able to tune TBI computers for the roundy-roundy guys.
    Look no further my good man.

    I've got tons of just about everything. Naturally I'd prefer to get rid of the v6 stuff first for cores since you would be working your magic on them anyway. Will check the shed tomorrow and take some inventory.

    Rough estimate of
    3-4 v6 smec
    3-4 v6 sbec
    3-4 v6 sbecII
    2-3 tbi sbec

  20. #20
    boostaholic
    Join Date
    Jan 2006
    Location
    Clinton Twp Mi
    Posts
    1,395

    Re: BoostButton.com

    I've often wondered if the V6 SMEC could be used for the 4 cyl turbo with just a socket and cal. Or does anything else have to be done to it ? I would imagine they had 2 drivers in them for batch firing, which is why I thought they would work. Which brings to mind, you think it's possible that a TBI SMEC has more than 1 driver. I could understand a generic SMEC for production purpose's.

Page 1 of 4 1234 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •