All,
I had a request for one of these because for some reason the guy that used to sell them on ebay doesn't currently have any listed. I had already drawn one up for myself so I made a few. They should fit the HX35, and HY35, and WH1C turbos that have the 5 bolt flange.
They are a little more expensive than the ebay units were but I strongly feel that they are a better product. They are waterjet cut so they are a lot cleaner and don't have spatter and pitting all over them. The ebay seller plasma cut them to make them cheap and they really showed it.
They are made from 3/8" mild steel and I also made them thicker around the outside diameter of the outlet so they should warp less during welding. The center hole is just over 3" so that a 3" pipe can be slip fit inside of it.
They are $35 plus $5 shipping I have 3 in stock and of course I can make more if people are interested in them:
They can be ordered here:
http://rbryant.freeshell.org/misc_products.htm
Thanks,
Rich