looks a lot better, now just hope they ride well. If you go with a softer spring and go with a much softer rate you might have to step to the 12" spring but what you've got looks good now.
looks a lot better, now just hope they ride well. If you go with a softer spring and go with a much softer rate you might have to step to the 12" spring but what you've got looks good now.
Had it aligned. Drives very nice. Corners flat! But then, the old struts were totally gone.
Great stuff for great cars! Poly engine mounts and bushings at: http://www.polybushings.com
Good info, thank's.
Did you lower it or stock ride height?
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
Van is stock ride height still for now. Putting studded tires on Saturday and then Sunday heading to snow country for a week to go skiing. Will lower it later.
Great stuff for great cars! Poly engine mounts and bushings at: http://www.polybushings.com
Gotcha,
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
You bringing that van to SDAC? We might have a war of the murdered out lowered vans with gunmetal clading and pimp wheels!
James Reeves - Reeves Racing
World's Fastest 8 Valve - 146.88 mph
86 GLH-T 9.99 at 143.78 mph
86 GLHS #169 Mom's - complete Super 60 car
87 Shelby Z 14.16 Dad's - mostly stock, no sh*t!
88 Shelby Z 13.5 - been in storage for 15 years
03 SRT-4 12.24 Mom's
07 Charger 5.7L 12.48 Dad's
I hope to bring my wagon with the SDAC engine in it.
Great stuff for great cars! Poly engine mounts and bushings at: http://www.polybushings.com
Tow the wagon with the van
Why not just drive the wagon?
If I tow, it would be with my diesel truck.
Great stuff for great cars! Poly engine mounts and bushings at: http://www.polybushings.com
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
Are you really going this year??
Great stuff for great cars! Poly engine mounts and bushings at: http://www.polybushings.com
James Reeves - Reeves Racing
World's Fastest 8 Valve - 146.88 mph
86 GLH-T 9.99 at 143.78 mph
86 GLHS #169 Mom's - complete Super 60 car
87 Shelby Z 14.16 Dad's - mostly stock, no sh*t!
88 Shelby Z 13.5 - been in storage for 15 years
03 SRT-4 12.24 Mom's
07 Charger 5.7L 12.48 Dad's
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
The ride and performance of the coil set up I used is great!!!
But have an issue of something...the issue I call bearing delay. The strut/spring should turn smoothly with the hub. But it doesn't. The bearing is new and works fine. I took it off the double check. When you turn the van, you hear and see (while watching and someone else is doing the turning) the spring will turn then the bearing catches up in jerks. While this happens you hear the spring "boing" while it jerks.
Everything looks right, but it is not. And I am not sure what to do next.
Great stuff for great cars! Poly engine mounts and bushings at: http://www.polybushings.com
Hmm, i would be looking for scrape marks anywhere near the bearing where there might be something rubbing that is keeping all the weight from riding on the bearing, that might be scraping.
Dont push the red button.You hear me?
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
Wayne H.
'91 Dodge Spirit ES 2.5L turbo 5spd
'05 PT GT 2.4T HO autostick (RIP)
'89 Plymouth Acclaim 2.5L turbo auto, "Slugmobile" yes, THE Slugmobile!
'89 Dodge Caravan SE 2.5L turbo auto, "Mean Mini" yes, Gus' Mean Mini! (Current best 11.699 @ 114.43 mph! - Oct 15th, 2022 Cecil County Dragway, MD)
MeanMini dragracing videos: https://www.youtube.com/playlist?lis...URZLB1RxGYF6vw
and other cars, trucks and motorcycles
https://www.youtube.com/user/SlugmobileMeanMini
It is though, taken a look at that. Even taken it apart and double checked.My guess would be the spring spacer shoulder isn't sitting on the upper bearing plate race, so its not letting the bearing move.
Great stuff for great cars! Poly engine mounts and bushings at: http://www.polybushings.com
To get it fixed, I decided to buy a couple items from Rich...
http://rbryant.freeshell.org/suspension_products.htm
Great stuff for great cars! Poly engine mounts and bushings at: http://www.polybushings.com
You better take it to SDAC and autox it after all this high faluting suspension work.
Dont push the red button.You hear me?