WTB: Broken Axle

[Nemesismachine]

I need the splined part that goes into the hub (with good threads) and maybe a foot of axle behind it. Trying to make my polishing stand. Anyone got any junk ones they dont know what to do with?

[Turbo3Iroc]

I have a few but I'm sure you can snag one closer.

[Nemesismachine]

at this point it's a matter of time, which I dont have a lot of.

[Turbo3Iroc]

Have you called up Pat or the other locals down there? I can box one up tonight for you if all else fails.

[Nemesismachine]

I don't know the locals down here :P

Anyone close to westminster, md got a broken axle they don't want?

[turbovanman²]

I can ship one out too if you can't find anyone else to do it.

[Nemesismachine]

with the splines and maybe a foot of axle left? Again, I don't need the whole thing. Just enough to attach it to a hub and throw a pulley on the other end.

[t3rse]

Like this? Not broken...still splined on the other end...I just needed the tulip and cross.

[Nemesismachine]

Yeah, I need the outer end and some axle shaft. Doesn't need to be a good CV joint, it's just going to be in a fixed position.

[Turbo3Iroc]

I found one that might help you out. It is a drivers axle broken off at the splines of the inner CV. The outer CV is in great shape and has the trigger wheel for ABS.

[Nemesismachine]

I dont need the trigger wheel, if you do keep it. This is for a polishing machine I want to make, so any parts you need hold onto.

[JDAWG]

heh, i have one with a pulled apart outer, wheel never even hit the ground and the joint pulled apart

[Nemesismachine]

If you don't want it I can meet you in Frederick to pick it up, if you like.