Page 1 of 2 12 LastLast
Results 1 to 20 of 38

Thread: parting out spirit/daytona/lancer

  1. #1
    Supporting Member Turbo Mopar Contributor glhs727's Avatar
    Join Date
    Dec 2005
    Location
    Spring, Texas
    Posts
    2,168

    parting out spirit/daytona/lancer

    I am parting out a 1991 spirit r/t, 93 daytona r/t and 1986 lancer. NONE have motor or trans, but all are pretty complete body and interior. If you need anything, please let me know and I will pull it before it goes to the crusher. The daytona has frame rot, but have a lot of good parts like rear tailights, rear bumper, front bumper, gfx, and some good body panels. The spirit was wrecked low, has some frame damage but has some staright rust free panels, just missing the paint on a lot of it. Lancer has good paint except hood and bumper. Red leather interior, decent. This was a donor car for a rampage turbo motor swap. All cars going to Crusher on Monday. Call or email me at sales@fwdperformance.com. If you don't have money now, but will in the next 90 days, still call me and I will pull the parts and set aside for you.
    Thanks,
    Cindy
    FWD Performance is a performance shop with a significant investment in this market. We pride oursleves with a hard work ethic, friendly customer service, and honest business dealings with no hidden fees. FWD Performance, Real Race Products by Real Racers.

  2. #2
    Supporting Member Turbo Mopar Contributor Turbo Joe's Avatar
    Join Date
    Dec 2005
    Location
    South Coast Ma.
    Posts
    884

    Re: parting out spirit/daytona/lancer

    spirit r/t brakes abs or no? intersted in entire brake system, TY
    Turbo Joe
    ----------------------- 87 CSX #175 TIII powered, MegaSquirt3 Pro Ultimate, GTX3076R, Turbo Joe header, Lengel intake, Menegon ported head, the list goes on

  3. #3
    Hybrid booster Turbo Mopar Contributor
    Join Date
    May 2008
    Location
    Green Bay area Wisconsin
    Posts
    676

    Re: parting out spirit/daytona/lancer

    I'm looking for a clean and completely rust free hood for a 3rd gen daytona, how is that one?

  4. #4
    Supporting Member Turbo Mopar Contributor supercrackerbox's Avatar
    Join Date
    Dec 2005
    Location
    Firth, Nebraska
    Posts
    5,022

    Re: parting out spirit/daytona/lancer

    I'll try to give you a call in the morning, hope I remember.

  5. #5
    turbo addict
    Join Date
    Nov 2008
    Location
    Plainfield, Illinois
    Posts
    2,887

    Re: parting out spirit/daytona/lancer

    what color interior on the daytona?
    does it still have the rad/IC?

  6. #6
    Supporting Member Turbo Mopar Contributor glhs727's Avatar
    Join Date
    Dec 2005
    Location
    Spring, Texas
    Posts
    2,168

    Re: parting out spirit/daytona/lancer

    abs brain box, motor set-up with lines and master cylinder I can do for $100 plus shipping.

    Hood has paint peeling but looks to be in good shape, no obvious rust. $75 but you will have to arrange pick up/shipping. I would suggest using www.uship.com

    Inner driver fender plastic. John, not sure if this is what you want. there are two pieces -one on the front side, one on the back side, $25 plus shipping for both, here are some pictures
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	042.JPG 
Views:	84 
Size:	76.9 KB 
ID:	20567   Click image for larger version. 

Name:	043.JPG 
Views:	91 
Size:	74.2 KB 
ID:	20568  
    FWD Performance is a performance shop with a significant investment in this market. We pride oursleves with a hard work ethic, friendly customer service, and honest business dealings with no hidden fees. FWD Performance, Real Race Products by Real Racers.

  7. #7
    Supporting Member Turbo Mopar Contributor glhs727's Avatar
    Join Date
    Dec 2005
    Location
    Spring, Texas
    Posts
    2,168

    Re: parting out spirit/daytona/lancer

    I may be able to transport some of the large parts from Texas to Monroe Wisconsin for a small fee if needed....
    FWD Performance is a performance shop with a significant investment in this market. We pride oursleves with a hard work ethic, friendly customer service, and honest business dealings with no hidden fees. FWD Performance, Real Race Products by Real Racers.

  8. #8

    Re: parting out spirit/daytona/lancer

    Is the daytona power window'd/locks? Looking for door panels if they'll fit 1990. Price shipped to 48464.

  9. #9
    Supporting Member Turbo Mopar Contributor glhs727's Avatar
    Join Date
    Dec 2005
    Location
    Spring, Texas
    Posts
    2,168

    Re: parting out spirit/daytona/lancer

    Quote Originally Posted by trannybuster View Post
    Is the daytona power window'd/locks? Looking for door panels if they'll fit 1990. Price shipped to 48464.
    daytona door panels and seats are gone.
    FWD Performance is a performance shop with a significant investment in this market. We pride oursleves with a hard work ethic, friendly customer service, and honest business dealings with no hidden fees. FWD Performance, Real Race Products by Real Racers.

  10. #10

    Re: parting out spirit/daytona/lancer

    is the lancer an auto

  11. #11
    Hybrid booster Turbo Mopar Contributor
    Join Date
    May 2008
    Location
    Green Bay area Wisconsin
    Posts
    676

    Re: parting out spirit/daytona/lancer

    pm sent on the hood Cindy.

  12. #12
    Bad Mother Flecker Turbo Mopar Staff fleckster's Avatar
    Join Date
    Dec 2005
    Location
    Arcadia, IN (just N of Indy)
    Posts
    2,607

    Re: parting out spirit/daytona/lancer

    Sorry, Cindy, but neither of those is the part I was looking for. Looking back at the factory service manual, the part I'm looking for is the "SHIELD, Trans. Lt. - 4655121". The two piece wheel well liners are in the front and back of the wheel well and this is between them on the subframe covering end of the transmission and held on by one screw. Looking at the picture of the front piece, it should be just behind it and looks like this piece may be missing on this Spirit as well.

    John M. Fleck

    '83 Dodge Rampage 2.2 w/ 2.5L Turbo 14.79@94
    '87 Shelby Lancer #213 14.99@94
    '89 Chrysler LeBaron GT Turbo 'vert 15.88@92
    '92 Dodge Spirit R/T 13.50@104 ; 13.34@102 on slicks
    '98 Dodge Neon R/T 15.66@89
    '03 Dodge SRT-4 13.91@98

  13. #13
    turbo addict
    Join Date
    Nov 2008
    Location
    Plainfield, Illinois
    Posts
    2,887

    Re: parting out spirit/daytona/lancer

    i want the iroc R/t rad/IC for a 91 T1
    and i was wondering on the carpet color i need some bad

  14. #14
    Supporting Member Turbo Mopar Contributor glhs727's Avatar
    Join Date
    Dec 2005
    Location
    Spring, Texas
    Posts
    2,168

    Re: parting out spirit/daytona/lancer

    NO engine, trans or Radiators!

    OK, here is what is off the car so far:
    Daytona:
    I/C (no radiator)
    rear spolier
    rear bumper cover
    front bumper cover with headlight assemblies/turn signals
    gfx parts: front pieces that attach to body, not doors, and 2 rear pieces that attach to body
    rear taillights
    tailight sub assembly
    rear hatch lower panels- agate
    rear interior panels -agate
    parking brake
    steering coloumn with good steering wheel
    Plastic Rad/ headlight cover

    Spirit:
    Radio bezel
    gauge bezel
    B&M short throw shifter
    center console
    Good arm rest
    tailights, left right and center
    Spirit R/T engine harness with ABS missing fog light connectors, has both 3 bar and stock map sensors plugs, and has broken fan plug clip. Other decent shape
    ABS brain box
    headlights
    amber turn signals
    trunk lid


    That is what we have pulled of as of now.
    FWD Performance is a performance shop with a significant investment in this market. We pride oursleves with a hard work ethic, friendly customer service, and honest business dealings with no hidden fees. FWD Performance, Real Race Products by Real Racers.

  15. #15
    Supporting Member Turbo Mopar Contributor glhs727's Avatar
    Join Date
    Dec 2005
    Location
    Spring, Texas
    Posts
    2,168

    Re: parting out spirit/daytona/lancer

    Quote Originally Posted by turboking View Post
    is the lancer an auto
    Lancer is a 5 speed
    FWD Performance is a performance shop with a significant investment in this market. We pride oursleves with a hard work ethic, friendly customer service, and honest business dealings with no hidden fees. FWD Performance, Real Race Products by Real Racers.

  16. #16
    turbo addict
    Join Date
    Nov 2008
    Location
    Plainfield, Illinois
    Posts
    2,887

    Re: parting out spirit/daytona/lancer

    leather wrapped wheel on the daytona?

  17. #17
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: parting out spirit/daytona/lancer

    Did you get my email Cindy?
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  18. #18
    Supporting Member Turbo Mopar Contributor glhs727's Avatar
    Join Date
    Dec 2005
    Location
    Spring, Texas
    Posts
    2,168

    Re: parting out spirit/daytona/lancer

    Quote Originally Posted by turbovanman View Post
    Did you get my email Cindy?
    yes, i got the email. No prop valves...
    FWD Performance is a performance shop with a significant investment in this market. We pride oursleves with a hard work ethic, friendly customer service, and honest business dealings with no hidden fees. FWD Performance, Real Race Products by Real Racers.

  19. #19
    Super Moderator Turbo Mopar Staff 135sohc's Avatar
    Join Date
    Aug 2008
    Location
    SoMd
    Posts
    6,179

    Re: parting out spirit/daytona/lancer

    Got any of these ?

    http://www.turbo-mopar.com/forums/sh...=jounce+bumper

    Its inside the rear coil spring, attached to the body.

  20. #20
    Hybrid booster Turbo Mopar Contributor
    Join Date
    May 2008
    Location
    Green Bay area Wisconsin
    Posts
    676

    Re: parting out spirit/daytona/lancer

    Did you get my pm about the hood?

Page 1 of 2 12 LastLast

Similar Threads

  1. General Huge TD parts sale! 2.2T2's, 555, 520, more!, also parting 87 Shelby Daytona
    By daytonaturbo87 in forum Parts For Sale
    Replies: 37
    Last Post: 12-19-2009, 02:55 AM
  2. General Parting 89 Lebaron GTC TII (red)
    By tps25pentium in forum Parts For Sale
    Replies: 10
    Last Post: 08-03-2009, 05:59 PM
  3. General Parting 89 Shelby Daytona Tii A555
    By midohiomoparsource in forum Parts For Sale
    Replies: 9
    Last Post: 12-22-2008, 09:55 AM
  4. Parting a '91 Daytona Shelby
    By RoadWarrior in forum Parts For Sale
    Replies: 21
    Last Post: 06-30-2006, 12:27 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •