Holset HE351VE (VGT) picturs of installed ?

[pauly_no_van]

Hello,

I am in mock-up phase of installing a vgt I got over x-mas.
I am wondering if anybody is running one of these, and if they have pics of their installs...
Thanks!

paul

[ShadowFromHell]

In a TM? Is there any room? Those things are HUGE!

I have 2 in my garage. I wanna see pics too

[Shadow]

deff no room on the stock mani rear mounted. (not without cutting the firewall) Best bet would be running it over the trans.

[pauly_no_van]

Haha, yes in a TM. C'mon, I can't be the first!
I figured I was going to need a manifold, but I'm going to make sure there's no adapter I can build for stock spot first.

[BadAssPerformance]

Cool... Got some pics Pauly?



BTW...I have a friend working on a VGT boost controller

[pauly_no_van]

no pics yet, I have to see if I have at least 10" diameter behind the installed motor somewhere first...

[shadow88]

Cool... Got some pics Pauly?



BTW...I have a friend working on a VGT boost controller

For the electronic actuated turbos like we're talking in this thread?

[t3rse]

obviously I was going to make a controller (it isn't very complicated) but the guy who was supposed to send me an actuator never did.

[pauly_no_van]

just use a wg can...

[BadAssPerformance]

For the electronic actuated turbos like we're talking in this thread?

Yes... there are controllers out there for $500... this one should be less

[Ondonti]

I would probably want to trade my he341 for one :P
Anyone have a picture of the turbine outlet?

[BadAssPerformance]

Here is my buddy's VGT... and a stock DSM turbo for comparison

[rx2mazda]

those turbo sell all day on ebay for 200+....would be nice to have a decently priced controller.

[turbovanman²]

I got an almost brand new one for $60,

[RedDeerGLH]

Bad picture but this is what mine looked like on the bench with a 2 piece intake and the stock exhaust manifold. And another picture for size comparison.

[pauly_no_van]

I want to make an adapter that will allow me to mount it lower and in a little tighter to the block, still have to see if a 10" pizza wheel is going to fit back there.... Steering column/rack may also be an issue.
(van).
If I can make it fit, it might be done this summer.
Have to make an intake and buy springs/regrind cam . . . . . . .

[W.P._Turbocars]

I am waiting to see this controller. I will buy one for my V6 Rampage swap.

[440dart]

anybody price out fleece performance's controller must be exspensive since nobody has one yet

[440dart]

i know if you use there controler you can run there cheeta turbos

[BadAssPerformance]

anybody price out fleece performance's controller must be exspensive since nobody has one yet

Those are ex$pen$ive