Hello,
I am in mock-up phase of installing a vgt I got over x-mas.
I am wondering if anybody is running one of these, and if they have pics of their installs...
Thanks!
paul
Hello,
I am in mock-up phase of installing a vgt I got over x-mas.
I am wondering if anybody is running one of these, and if they have pics of their installs...
Thanks!
paul
In a TM? Is there any room? Those things are HUGE!
I have 2 in my garage. I wanna see pics too
deff no room on the stock mani rear mounted. (not without cutting the firewall) Best bet would be running it over the trans.
Robert Mclellan
http://www.youtube.com/watch?v=wambNdfnu5M
10.04 @ 143.28mph (144.82 highest mph)
Worlds fastest 8v MTX Shelby Charger
Manitoba's Fastest 4cyl!
8 valve, No Nitrous!
New clutch combo is the SH!T!
Haha, yes in a TM. C'mon, I can't be the first!
I figured I was going to need a manifold, but I'm going to make sure there's no adapter I can build for stock spot first.
Cool... Got some pics Pauly?
BTW...I have a friend working on a VGT boost controller
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
no pics yet, I have to see if I have at least 10" diameter behind the installed motor somewhere first...
obviously I was going to make a controller (it isn't very complicated) but the guy who was supposed to send me an actuator never did.
just use a wg can...
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
I would probably want to trade my he341 for one :P
Anyone have a picture of the turbine outlet?
Here is my buddy's VGT... and a stock DSM turbo for comparison
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
those turbo sell all day on ebay for 200+....would be nice to have a decently priced controller.
Carroll
SILVER, 85 GLH-R/T, TIII powered, Fueltech, ID1300's. PTE5857
RED, 91 Spirit R/T - Holset HE351 - 12.6 @ 107...R.I.P.
I got an almost brand new one for $60,
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
Bad picture but this is what mine looked like on the bench with a 2 piece intake and the stock exhaust manifold. And another picture for size comparison.
I want to make an adapter that will allow me to mount it lower and in a little tighter to the block, still have to see if a 10" pizza wheel is going to fit back there.... Steering column/rack may also be an issue.
(van).
If I can make it fit, it might be done this summer.
Have to make an intake and buy springs/regrind cam . . . . . . .
I am waiting to see this controller. I will buy one for my V6 Rampage swap.
anybody price out fleece performance's controller must be exspensive since nobody has one yet
i know if you use there controler you can run there cheeta turbos
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.