5X114.3 wheel options?

[W.P._Turbocars]

Ok as some of you know I am working out all the details on my 2nd Rampage. I am building an AWD and will be going with the 5x114.3 wheels. I'm trying to find a wheel that will compiment it (would like to run a wheel with a similar look to a torque thrust or cragar design but am unsure as to what offset I should be looking for. I understand that the stock dodge wheels are ~40 mm offset but how far can I go on either side of that number? I am going to keep this truck at stock height also if that helps at all.

Thanks in advance.
Gary

[j4278h]

grab some 16" lace or basket weave pattern wheels off a 1990-94 plymouth laser.

16X7 with a 4x114.3 bolt pattern.

[W.P._Turbocars]

I'd kinda like to grab some wheels from a Mustang but I don't know what offset they are.

BTW Jason the project is still at a standstill. My parts are still sitting at work outside but I came up with a free rear end and possibly free front spindles off some cars out back at work.

[Johnny]

The Intrepid wheels are 5x114.3, some look pretty good.

[CNH320]

[Speedeuphoria]

mustangs aftermarket wheels(wider) are like +25, not sure on stockers

[turbovanman²]

grab some 16" lace or basket weave pattern wheels off a 1990-94 plymouth laser.

16X7 with a 4x114.3 bolt pattern.

How the hell are those going to fit?

Grand Caravan and vans with stock 15" wheels come with the larger bolt pattern.

[W.P._Turbocars]

Those are awesome but aren't they like a 20"?

I would prefer to stick to either a 15" or 16"

[tsiconquest88]

use some widebody starion/conquest rims lol non sports handling package is 16x8 rear and 16x7 front, the sport handling (available 88-89) is 16x8 front and 16x9 rear and can take 255 width tires which is what i had used on those package rims but i heard of people even going wider yet. They look sweet polished too!!!

[W.P._Turbocars]

I know where a set of starquest widebody rims are. Just gotta see if I can get them cheap enough.

[W.P._Turbocars]

Any idea what the backspacing on the widebody starquest rims are?

[tsiconquest88]

ooof thats a good question, i used to know it and i totally forget now. Im pretty sure the fronts have a 0 offset. Rears 11? i can find out. BTW if you can try to grab the shp's. Im sure i can find u a set over at sqc site. I have had about 8 sets over of the shp rims and uncountable reg widebody rims haha.

[tsiconquest88]

wow close but no cigar lol, heres the numbers...
reg widy rims fronts and rears are +18mm
SHP rims front 8" rims is -10mm and the rear 9" are 0 mm offset.

Now thinking about it, idk how the offset will affect a TM. Since they are FWD and not too wide a car, idk how it would look let alone fit. The rear SHP 9" wide rims ahve the 0 offset which would help fitment BUT they are just so friggin wide lol. That would be the possible hinderence for wheel to hub clearance fit.

[ATaylorRacing]

I sell Mustang rims...and Vettes, SRT4, SRT10 truck, and misc other rims/tires.

The OLD school Mustangs have 15+ offset but lots of after market rims use 0 offset.
1994-2004 have 24+ offset
2005+ have a 42 offset!

You might get a set of 2005-2009 Bullitts and they MIGHT fit. I went to put some on my 2001 Caravan and even thou the offset was VERY close to the stock rims the spokes were hitting a metal bridge that is on the calipers! I used studs off a Dakota that were a finer thread and a bit longer along with a set of 1/4 inch spacers and DANG it looked cool! I had ordered some after market center caps with a flat serface for the 05+ Mustang rim and covered them with black decal material. I was going to place a set of Pentastar emblems that come on the first Neons made. Those were on the hood. Let me know whaat other rims from what cars you have in mind and I can search their offset and backspacing. The website I normally use for that is down for now.

The SRT8 I THINK has a 5x115mm bolt pattern..like some fwd newer GMS....only like .007" difference from the Mustangs.

35 time NHRA/IHRA Drag Race Champ
05 SRT4 / S2 / 12.87 @ 110 / DOTs
05 Mustang V6 / wifes / 15.17 @ 92 BONE stock
96 Geo Metro / 3 cyl - 1 ltr - 55 hp / 19.84 @ 66
84 Horizon / used to run 13's no power adders

[W.P._Turbocars]

You have any pics of the bullits on the van?

[ATaylorRacing]

You have any pics of the bullits on the van?

No, I sold it to my Dad after he totalled his a week later. I had alo made some decals for the fenders and hatch that said "4.0 Magnum Interceptor" even though it was a 3.3.....LOTS of looks and questions. I sell a set of 09 Mustang silver bullets for $390 with under 5 miles...with Pirelli P Zero Nero 235x55x17 tires for $700 with the same mileage. I can also get 17, 18, 1nd TWENTY inch replica rims for 94-09 and sell new 17 inch Cobra 4 lugs too....not to mention the other rims again.

765-455-1410

35 time NHRA/IHRA Drag Race Champ
05 SRT4 / S2 / 12.87 @ 110 / DOTs
05 Mustang V6 / wifes / 15.17 @ 92 BONE stock
96 Geo Metro / 3 cyl - 1 ltr - 55 hp / 19.84 @ 66
84 Horizon / used to run 13's no power adders

[Johnny]

I sell Mustang rims...and Vettes, SRT4, SRT10 truck, and misc other rims/tires.

Have a web site that shows what you have?

[Johnny]

http://www.discountedwheelwarehouse...._Reference.cfm

[ATaylorRacing]

Have a web site that shows what you have?

No, but I always just mail out flyers with photos of the rims and their prices.

A set of 18x9 Black Bullit rims with a machine polished edge is $545 with the offset for a 05-2010 model Mustang (42 mm). Call for details gang 765-455-1410. I do my own deliveries to KY, the western 2/3s of Ohio, IL, lower 2/3 of MI, IN, and SE corner of WI.

35 time NHRA/IHRA Drag Race Champ
05 SRT4 / S2 / 12.87 @ 110 / DOTs
05 Mustang V6 / wifes / 15.17 @ 92 BONE stock
96 Geo Metro / 3 cyl - 1 ltr - 55 hp / 19.84 @ 66
84 Horizon / used to run 13's no power adders