Results 1 to 11 of 11

Thread: Cleaning out the Garage: 16" Pumpers, GLHT Parts, Nitrous

  1. #1

    Cleaning out the Garage: 16" Pumpers, GLHT Parts, Nitrous (Southern California)

    Well I'm cleaning out the garage and came across a bunch of parts that I had originally intended for a budget turbo Omni along with some other TD stuff. All parts are located in Long Beach, CA. I'd prefer to try to sell things locally first and can bring anything to the SoCal Turbo Dodge meet at Applebee’s this Thursday if anyone’s interested. I apologize for the lack of prices, I haven’t frequently browsed the TD classifieds in probably 2 years and don’t know what’s reasonable let alone cheap. Anyway, I just need most of this gone so feel free to lowball (in bulk preferably!)

    You can reach me here or at hellafastrt@hotmail.com

    16” Pumpers, silver with light curb rash on 2. They're just very dirty, that's not damage. Tires are shot but should hold air if you’re putting them on a project car $140



    GLH-T Ground Effects, I believe the previous owner drove through some paint that splattered the left side.
    GLH-T Fog Light Covers $SOLD
    GLH-T Grill one broken tab
    GLH-T Hood Vent $SOLD



    It’s been a long time but these were either for an L Body tranny swap or cable shift conversion A523 Shifter $20
    Shift Cables from Shadow or Sundance Coupe $40
    Cylinder Head 287 Casting $20
    Intake Manifold $Best Offer
    Throttle Body $Best Offer
    Fuel Rail $Best Offer
    T1 Exhaust Manifolds x2 $Best Offer
    Distributor $Best Offer




    MP GLHS Stage II Logic Module w/o MAP sensor (P5249670) which I think is 14psi $SOLD

    Blitz FATT DCII Turbo Timer (pulled from a Subaru WRX) $60

    N2O Stuff $Best Offer
    1’ Line
    8’ Line
    10lb Bottle
    NOS Micro Switch (15640)
    NOS Fogger Nozzle
    NOS Pro Shot Nitrous Solenoid
    Top Gun Solenoid (Fuel?)
    Bottle Brackets




    Other Stuff (pics available)

    FZR600 Parts

    Dual Head Light Assembly
    Front Fairing Stay (Bird cage)
    K&N Pod Filters
    Used Solo Tail, cut for stock tail light
    Front & Rear Wheels (Purple!)

    Super Pocket Bike Parts (I think it was called the “Cat Eye” Model) $20 or Good Intentions
    Last edited by HellaFastRT; 02-05-2010 at 09:26 PM.

  2. #2
    Super Moderator Turbo Mopar Staff 135sohc's Avatar
    Join Date
    Aug 2008
    Location
    SoMd
    Posts
    6,179

    Re: Cleaning out the Garage: 16" Pumpers, GLHT Parts, Nitrous

    Has the cylinder head been resurfaced (recessed pad by water box) and are there any cracks ?

  3. #3

    Re: Cleaning out the Garage: 16" Pumpers, GLHT Parts, Nitrous

    The head hasn't been resurfaced since I acquired the it. If you could elaborate on the recessed pad comment, is there a dimension you'd like me to measure to see if the head has been milled? I see no visual cracking (I have no dye or ability to pressure test). Here's a pic of the dirty underside, there's still bits of gasket and large carbon deposits at the moment.


  4. #4
    Hybrid booster
    Join Date
    Sep 2008
    Location
    Winnipeg, MB, Canada
    Posts
    612

    Re: Cleaning out the Garage: 16" Pumpers, GLHT Parts, Nitrous

    Might want the fog lamp covers, keep me in line, I'm just going to check sizes...

    EDIT: Nope, they don't fit. Oh well, thanks anyway!

  5. #5
    Super Moderator Turbo Mopar Staff 135sohc's Avatar
    Join Date
    Aug 2008
    Location
    SoMd
    Posts
    6,179

    Re: Cleaning out the Garage: 16" Pumpers, GLHT Parts, Nitrous



    See the circled area. That head does look like its never been cut but if you could take some brakecleaner and clean the oil sludge out it would confirm it.

  6. #6

    Re: Cleaning out the Garage: 16" Pumpers, GLHT Parts, Nitrous



    Well here's a closeup of the area, I hope it can answer your question. On a related note I saw a couple little dings and would recommend having the head cleaned up and resurfaced before use.

  7. #7

    Re: Cleaning out the Garage: 16" Pumpers, GLHT Parts, Nitrous

    Well I'm looking to move everything fast so I'm now entertaining out of area offers! Some of the GLH-T stuff is tentatively sold as I've had a couple people contact me but most everything is still up for grabs!

  8. #8

    Re: Cleaning out the Garage: 16" Pumpers, GLHT Parts, Nitrous

    Hood vent, Bosch foglight covers and MP Computer sold.

  9. #9
    boostaholic
    Join Date
    Jan 2006
    Location
    Brimfield, IL
    Posts
    1,091

    Re: Cleaning out the Garage: 16" Pumpers, GLHT Parts, Nitrous

    PM sent about the Grill.

  10. #10
    Garrett booster
    Join Date
    Nov 2006
    Location
    Long Island
    Posts
    153

    Re: Cleaning out the Garage: 16" Pumpers, GLHT Parts, Nitrous

    intereseted in the nitrous parts

  11. #11

    Re: Cleaning out the Garage: 16" Pumpers, GLHT Parts, Nitrous

    All PM's responded to

Similar Threads

  1. cleaned out garage cheap parts
    By jaysshelby in forum Parts For Sale
    Replies: 7
    Last Post: 09-03-2006, 07:41 PM
  2. garage cleaning.
    By speedyshelby in forum Parts For Sale
    Replies: 0
    Last Post: 07-19-2006, 06:26 PM
  3. cleaning out garage!
    By WOP'R in forum Parts For Sale
    Replies: 11
    Last Post: 07-16-2006, 04:13 PM
  4. Garage Cleaning Sale
    By ScottD in forum Parts For Sale
    Replies: 8
    Last Post: 04-28-2006, 02:05 PM
  5. Garage Sale! Tons of engine parts!
    By 89ShelbyGuy in forum Parts For Sale
    Replies: 10
    Last Post: 02-15-2006, 12:19 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •