I have seen and heard people using these and that they need shims. Where exactly are the shims placed? what else is needed to use them?
I have also heard of people using beehive springs. What type do they use and what advantage do they have?
I have searched the forum but seem to find people talking about details not the basic installation steps
http://www.turbo-mopar.com/forums/sh...ghlight=lifter
Washer's go under the lifter to put it at stock height as they are shorter.
Conicals are used as the retainer is lighter and the springs do a better job of controlling the valve, easier on the valve and valve train too.
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS!12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
Posting Permissions
Reply With Quote