When the trans comes out to replace the clutch in the Shadow, I want to fab up a scatter shield on the off chance that the clutch/flywheel come apart (I like my feet the way they are!). Anyone have a pics of one they've done?
When the trans comes out to replace the clutch in the Shadow, I want to fab up a scatter shield on the off chance that the clutch/flywheel come apart (I like my feet the way they are!). Anyone have a pics of one they've done?
Last edited by Pat; 01-07-2010 at 04:16 PM.
Working on a design right now.... Group buy?
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
I'd be interested.
OK, lets get this started....
1. BadAssPerformance
2. tommy
3. Pat
4.
5.
6.
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
Will it fit autos, too? If so, I might be interested (depending on price and timing). I'll need one if I ever get to work on my super stock engine/trans combo.
1. BadAssPerformance
2. tommy
3. Pat
4. Reeves
5.
6.
James Reeves - Reeves Racing
World's Fastest 8 Valve - 146.88 mph
86 GLH-T 9.99 at 143.78 mph
86 GLHS #169 Mom's - complete Super 60 car
87 Shelby Z 14.16 Dad's - mostly stock, no sh*t!
88 Shelby Z 13.5 - been in storage for 15 years
03 SRT-4 12.24 Mom's
07 Charger 5.7L 12.48 Dad's
I'll see if I can get a few pics of mine and the one I did for Dan.
-Brian Slowe
87 Shadow "BSX"
8.58 @ 162
86 GLHT
10.62 @ 130
05 SRT4
12.1 @ ???.??
06 Ram 3500
I'm on the interested list.
-Gary Mazzone-
1986 GLHS #168
Add me.
It's a little known NHRA rule that our cars are supposed to have them if you run a bigger turbo. Most tracks let it slide but I have been asked about it a couple times.
I'm interested pending price.
Mike Marra
1986 Plymouth Horizon GLMF "The Contraption" < entertaining sponsorship offers
Project Log:
http://www.turbo-mopar.com/forums/showthread.php?69708-The-Contraption-2013-14&highlight=
It very well could be but there is also a rule that requires us to wear a SFI jacket if you are running a non stock turbo. Doesn't matter if it originally had a turbo or not. I think the scatter shield is part of that. I haven't looked at the rule book so don't hold me to it. It was at Englishtown and LVD.
I also remember reading that a scatter shield had to be SFI approved meaning there was no way to get one for our cars...
True, there is not one SFI approved that I know of, but the rule states that if there is not an approved one available, that a sheild can be made from 1/4 steel. There are a few more specifics to it (which I don't remember off the top of my head), but there is reference our situation in the rule book.
Here is an article from the Feb '09 issue of Hot Rod.
http://www.hotrod.com/techarticles/n...ets/index.html
Mike Marra
1986 Plymouth Horizon GLMF "The Contraption" < entertaining sponsorship offers
Project Log:
http://www.turbo-mopar.com/forums/showthread.php?69708-The-Contraption-2013-14&highlight=
i was thinking something along the lines of a blanket from like RCI...
http://www.jegs.com/i/RCI/821/7808A/...oductId=753473
SFI 4.1 ?.?.?
but if BAP is working on one he want a test dummy to se if it will fit auto ill be a test monkey...