Page 1 of 3 123 LastLast
Results 1 to 20 of 59

Thread: Cylinder heads

  1. #1
    Authorized Vendor Turbo Mopar Vendor BadFastGTC's Avatar
    Join Date
    Dec 2005
    Posts
    652

    Cylinder heads

    I have decided to go back into the cylinder head market once again. I have been doing some work on the side since my "retirement", but the time has come to get fully involved again. I will continue to sell parts as I had done before, I will also be expanding my offerings as far as 16V work and related parts. Anyone interested can reach me here or call me at 717-226-3814
    Steve Menegon
    1989 T2 GTC (Sledgehammer)
    11.872@120.21
    1987 Shelby Lancer #574 - 13.79@104.65
    2005 SRT4 ACR (Mamba) 12.612@110.96 (Now Junk)
    2016 200S (The Silver Billet) 14.70@92.7

  2. #2
    two point two much fun Turbo Mopar Staff Turbodave's Avatar
    Join Date
    Dec 2005
    Location
    Northern IL
    Posts
    4,832

    Re: Cylinder heads

    Awesome Steve! If I can find some some extra cash I'll be calling.
    Dave Tekampe
    Director SDAC National
    VP SDAC-Chicago


    85 GLH-Turbo (DC intercooled)
    86 GLHS #107
    87 GLHS #148
    87 CSX #161, #608, #674
    88 CSX-T #529, #541
    89 Shadow Competition Package and lots more...

  3. #3
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,441

    Re: Cylinder heads

    That is great Steve! I will start saving my pennies.

  4. #4
    turbo addict Captain Chaos's Avatar
    Join Date
    Dec 2005
    Location
    Jacksonville, Fl.
    Posts
    2,308

    Re: Cylinder heads

    Just in time for tax time!

  5. #5
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,688

    Re: Cylinder heads

    Awesome Steve!

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  6. #6
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: Cylinder heads

    The legend continues,
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  7. #7
    Hybrid booster Turbo Mopar Contributor DBB mini's Avatar
    Join Date
    Apr 2006
    Location
    tulsa
    Posts
    452

    Re: Cylinder heads

    +1 You da man.

  8. #8
    Supporting Member Turbo Mopar Contributor mopar-tech's Avatar
    Join Date
    Dec 2005
    Location
    Oakdale CT
    Posts
    2,419

    Re: Cylinder heads

    I'll send work your way brother!


    Working on clearing the decks.

  9. #9
    Hybrid booster guyd_15's Avatar
    Join Date
    Dec 2005
    Location
    Newark, Delaware
    Posts
    580

    Re: Cylinder heads

    Alright!!!

    And 16V too. Taylor will be happy to hear that.

    Guy

  10. #10
    turbo addict
    Join Date
    Dec 2005
    Location
    Gettysburg, Pa.
    Posts
    1,699

    Re: Cylinder heads

    Crap! Figures that I just spent big money on another head just last week....

  11. #11
    turbo addict
    Join Date
    May 2007
    Location
    Roanoke, Virginia, United Stat
    Posts
    1,771

    Re: Cylinder heads

    Steve buddy...you just prove you can't keep a good man . Hope to see you soon and glad to see you back at it

  12. #12
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,441

    Re: Cylinder heads

    Quote Originally Posted by badandy View Post
    Steve buddy...you just prove you can't keep a good man . Hope to see you soon and glad to see you back at it
    Keep your dating problems out of this.

  13. #13
    Supporting Member Turbo Mopar Contributor 2.216VTurbo's Avatar
    Join Date
    Dec 2005
    Location
    SoCal the OC
    Posts
    6,675

    Re: Cylinder heads

    16V too huh Nice

    AJ (no More Alan) 84 Rampage RT TIII/568 Quaife 87 GLHS dealer optioned Red 16V Masi/568/Quaife
    90 Masi 16V White/Ginger/Black
    89 TC Masi 16V Red/Ginger/Black
    86 GLHS #110 RoadRace Built 89 CSX-VNT Recaro Car
    89 Turbo Mini 'Woody' 85 GLHT 'RedBox'
    2014 Explorer DD'r 3.5Twin Turbo Ecoboost AWD and 500HP
    My profile page has over 20,000 views, I'm somebody LOL

  14. #14
    Supporting Member Turbo Mopar Contributor
    Join Date
    Feb 2007
    Location
    Camilla Ga
    Posts
    720

    Re: Cylinder heads

    will this include head repair?

  15. #15
    Hot Certified Christians at TD! Turbo Mopar Staff Directconnection's Avatar
    Join Date
    Dec 2005
    Location
    Nunya-Maine
    Posts
    6,027

    Re: Cylinder heads

    I have seen and tested work from most all TM head porters, and I will say that Steve's work is top notch. He does *know* exactly what he is doing.

    I am biting my lip on most others I have tested, though
    Quote Originally Posted by 22mopar
    have a look at my feedback on the forum. all positive.

    Steve

    '90 VNT competition package Shadow - T-III SC6262 conversion/restoration
    '91 Spirit R/T - white
    '91 Spirit R/T - white
    '92 IROC R/T - red
    '67 Barracuda 273 now, 440/727 awaits....

  16. #16
    Supporting Member Turbo Mopar Contributor rx2mazda's Avatar
    Join Date
    Apr 2006
    Location
    Baltimore,MD
    Posts
    2,925

    Re: Cylinder heads

    STEVE, i'll be sending one your way soon!
    Carroll

    SILVER, 85 GLH-R/T, TIII powered, Fueltech, ID1300's. PTE5857
    RED, 91 Spirit R/T - Holset HE351 - 12.6 @ 107...R.I.P.



  17. #17
    turbo addict
    Join Date
    May 2007
    Location
    Roanoke, Virginia, United Stat
    Posts
    1,771

    Re: Cylinder heads

    Quote Originally Posted by cordes View Post
    Keep your dating problems out of this.
    LOL! That was supposed to say "can't keep a good man down".

  18. #18
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: Cylinder heads

    Quote Originally Posted by Directconnection View Post
    I have seen and tested work from most all TM head porters, and I will say that Steve's work is top notch. He does *know* exactly what he is doing.

    I am biting my lip on most others I have tested, though
    In that case, your probably bleeding pretty good,

    If you'd still been doing them when I went TIII, I might not have bothered and stayed 8 valve,
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  19. #19
    turbo addict
    Join Date
    Oct 2007
    Location
    Rockville, Md
    Posts
    3,520

    Re: Cylinder heads

    Welcome back Steve, that's great to hear. I hope 2010 is a busy year for you.

  20. #20
    Authorized Vendor Turbo Mopar Vendor BadFastGTC's Avatar
    Join Date
    Dec 2005
    Posts
    652

    Re: Cylinder heads

    Great! I'd love for you to send me some cash!

    Quote Originally Posted by Turbodave View Post
    Awesome Steve! If I can find some some extra cash I'll be calling.
    Steve Menegon
    1989 T2 GTC (Sledgehammer)
    11.872@120.21
    1987 Shelby Lancer #574 - 13.79@104.65
    2005 SRT4 ACR (Mamba) 12.612@110.96 (Now Junk)
    2016 200S (The Silver Billet) 14.70@92.7

Page 1 of 3 123 LastLast

Similar Threads

  1. What are the differences between the 86 and 87 GLHS heads.
    By glhturbo1985 in forum Maintenance & General Tech
    Replies: 6
    Last Post: 02-24-2009, 05:43 PM
  2. Ported Cylinder Heads !!
    By tvanlant in forum General Vendor Area
    Replies: 34
    Last Post: 01-10-2008, 07:20 PM
  3. Cylinder heads
    By overlordsshadow in forum "I need help!"
    Replies: 2
    Last Post: 07-09-2007, 09:13 PM
  4. Question about shaved cylinder heads...
    By Bubba in forum Engine - Block, Piston, Heads, Intakes
    Replies: 2
    Last Post: 05-29-2007, 12:09 PM
  5. Cylinder heads and stuff for sale
    By 86reliant in forum Parts For Sale
    Replies: 5
    Last Post: 11-27-2006, 01:56 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •