Well this should probably be somewhere else, but it's related to the Moates Chip Extender. I feel they should have a case or cover for it, but alas they do not. So I'm going to make a unit that can be reproduced. This is what I'm starting with, but I don't know where it will go from here.The main part I haven't figured out is the top and how it will secure to the bottom.
[SIZE="3"] [B]Jon Trotter[/B][/SIZE] [B]1985[/B] Dodge Shelby Charger, Currently decommissioned [B]1987[/B] Shelby GLHS, #937 [B]1987[/B] Shelby Lancer, #628 [QUOTE=Reeves;587010]I can be ready. Please send pics of wife. _____DodgeZ add comments here______[/QUOTE]
Nice
PM'D you
Replied. Seriously, call me tomorrow if you have time.Originally Posted by "Top Fuel" Bender
Nice
PM'D you
[SIZE="3"] [B]Jon Trotter[/B][/SIZE] [B]1985[/B] Dodge Shelby Charger, Currently decommissioned [B]1987[/B] Shelby GLHS, #937 [B]1987[/B] Shelby Lancer, #628 [QUOTE=Reeves;587010]I can be ready. Please send pics of wife. _____DodgeZ add comments here______[/QUOTE]
one day you'll get that diag plugged made.......
2022 Viper runs 9s
One day you'll have your own washer and dryer to do your laundry. OH NO I DI N'T! SNAP!
[SIZE="3"] [B]Jon Trotter[/B][/SIZE] [B]1985[/B] Dodge Shelby Charger, Currently decommissioned [B]1987[/B] Shelby GLHS, #937 [B]1987[/B] Shelby Lancer, #628 [QUOTE=Reeves;587010]I can be ready. Please send pics of wife. _____DodgeZ add comments here______[/QUOTE]
yeah, but it so much easier having your mom do it!
2022 Viper runs 9s
I hate you.
[SIZE="3"] [B]Jon Trotter[/B][/SIZE] [B]1985[/B] Dodge Shelby Charger, Currently decommissioned [B]1987[/B] Shelby GLHS, #937 [B]1987[/B] Shelby Lancer, #628 [QUOTE=Reeves;587010]I can be ready. Please send pics of wife. _____DodgeZ add comments here______[/QUOTE]
That looks nice Jon. You really need to get a project log going for the Charger so I don't miss any of this stuff.
If you add some meat to the outside you can leave enough there for some kind of o-ring groove and tap the corners for a top to screw on, then cut out a hole in the side for the wiring to attach.
Well I have thought a lot about doing that. I think I have enough pictures from over the years to start something and get the info flowing, just need to do it I guess.
Well I did think about how the cap would fit on. I have it as thin as it is so it can be reproduced in plastic and be pretty small. The idea I had for mounting the cap was going to be a lid that fit over the edges with little notches so it would snap together. The thickness or thinness as it is may be a problem, but it doesn't take much to hold something like that together. We'll see what happens.
[SIZE="3"] [B]Jon Trotter[/B][/SIZE] [B]1985[/B] Dodge Shelby Charger, Currently decommissioned [B]1987[/B] Shelby GLHS, #937 [B]1987[/B] Shelby Lancer, #628 [QUOTE=Reeves;587010]I can be ready. Please send pics of wife. _____DodgeZ add comments here______[/QUOTE]
Mmmmmmmmm, where are you going to route the wire?
Looks good. Just use some RTV to glue the board to the box, it will still come apart easily down the road.
We do have other options, TUPPERWARE,
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS!
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
Worry not where the plug will go, we are thinking about all options. Main ones are, mounting the chip inside, securing it, static or conductive issues, securing the top and mounting the unit capabilities. I'm going to work with Bruce on some details about the case, but hopefully it will all work out.Mmmmmmmmm, where are you going to route the wire?
Looks good. Just use some RTV to glue the board to the box, it will still come apart easily down the road.
We do have other options, TUPPERWARE,
[SIZE="3"] [B]Jon Trotter[/B][/SIZE] [B]1985[/B] Dodge Shelby Charger, Currently decommissioned [B]1987[/B] Shelby GLHS, #937 [B]1987[/B] Shelby Lancer, #628 [QUOTE=Reeves;587010]I can be ready. Please send pics of wife. _____DodgeZ add comments here______[/QUOTE]
Posting Permissions
Reply With Quote
10's AGAIN '07, '08, '09 
