Ok, tons of stuff, all parts in US dollars plus shipping. If you don't like the price, ask and I can say yes or no.
I also have tons of other stuff, ask and you might be surprised or not, lots of minivan stuff too.
Paypal or money orders and please be patient on shipping, sometimes it right away, sometimes a few weeks.
Keep checking as I'll be adding more items..............
2.5 turbo .030 brand new Cast Mahles with wrist pins and clips, no rings-$260 shipped.
TIII valve covers, need paint, $75-SOLD
New OEM but not Dodge OEM timing belt idlers with countersunk bolts, $60
Socketed SBEC with Zif socket, $75-SOLD
2.2 Forged turbo JE's, .040, $250 no rings.SOLD
2.5 Forged flat top JE's, .020, .912 wrist pins and locks, mint shape, no rings. $250.
XD16 gauge, chrome bezel, its the older version by Haltech but same thing as the new Innovate version. Face is a bit scratched up. Tested and works fine, $75 SOLD
1 set of TIII stock cam gears, $75 a pair.SOLD SOLD
TIII auxillary shaft gear, $40
TIII FM elbow, lets you use the stock dp when running a hybrid turbo. Bolts to a Ford type SV. $150 SOLD
TIII aluminium oil caps-chrome, blue and a couple red ones, $10.
90 T1 Shadow harness, missing Ox connector but I can replace that and minor wiring issues at column due to alarm being removed. Car ran. $50
Minivan control arms-braced from the factory, great upgrade on cars-$40
Log intake vacuum distribution blocks-those can things-$5. 2 of them.
Non a/c alt brackets, $25, I have 3+.
Complete rear discs of 87 Shadow, calipers need rebuilding, no cables. $40
Air Research .48 4 bolt housing, external wastegate, coated with a high temp silver coating, Stage III wheel, $150
Good back cut swirl head turbo valves, $20.
Comp cams stiffer valve springs, slightly stiffer than the S60's, $70.
PM's, tested, $20 each. I have at least 2.
86 log turbo LM, tested, $40-think I have 2 of these.
87 T1 turbo LM's, might have 2, 75 each.
I have some newish front wheel bearings, bolt in style for vans or cars with that style bearing, large bolt pattern, 5x114.3. They are good as I drove the van before I removed them. $30 plus shipping.
Rear hubs from a Minivan, also large bolt pattern. $20 plus shipping
I also have CB pulleys, brackets, oil dist blocks, crank seal retainers etc. $5-$15 each.
Stock bore TII Mahle pistons, $15 each, have 3 of them.
TII rods, $10 each, 3 left.
52mm t/b, no sensors, $30.
304 stainless 90 deg 3 inch mandrel bent pipe with Talon BOV flanged welded on, I bought the pipe from Racing Solutions. $30.
Wilwood 4 piston calipers, not leaking, 1.74 inch pistons, was going to use them for my 11 inch rotors but changed my mind. $75
I have some pics, if you want some, let me know.