window scraper intallation....

[StanmanJay]

I can't seem to find the room to slip the window bolts off the regulator. Any help would be great!

[A.J.]

Roll/push the window all the way up. Then use an extension and I believe an 11mm socket to take them off. There are holes cut in the door to get them off with the window all the way up.

A.J.

[StanmanJay]

I'll try that today, thanks A.J. I tried with the window almost all the way down.

[raccoon]

on P-bodies, I dont remove the glass, I bend the lower bump stop out of the way and roll the window to the bottom plus some. you can get all all the Philip screws when its lower then the stop.

[StanmanJay]

this for my 89 Shelby Daytona w/power windows I forgot to mention...

[StanmanJay]

I tried again today and still cant find the room to slip the window off the regulator, WTF!