Results 1 to 18 of 18

Thread: 1993 Daytona Door Panels and Engine Wiring

  1. #1

    1993 Daytona Door Panels and Engine Wiring

    R/L Quartz door panels with J7D code (base door panels). 1993 Daytona.

    The left one has next to the door handle opening a slight small dark spot in the insert area. Other than that these are uncracked and the weatherstrip at the top of the panels are unbroken. Complete/armrests.

    The harnesses were in the trunk and the car was a V6 Automatic. These are both uncut.

    I'll take 100.00 for all 4 pieces. shipping extra.

    Trades on any 1992-93 Daytona stuff you might have.

    mkolner14@hotmail.com for reply 480-966-6683



    Last edited by martin kolner; 12-18-2009 at 02:12 PM.

  2. #2
    turbo addict
    Join Date
    Jan 2007
    Location
    South Gillies, ON. Canada
    Posts
    2,923

    Re: 1993 Daytona Door Panels and Engine Wiring

    neato, never seen a driver door foam where you pull on not broken.
    1988 Lancer Shelby 2.2TII 1989 Shadow ES 2.5TI 1992 Lebaron Sedan 3.0Auto 1993 Acclaim 2.5TI-A520 Hoard parts now!

  3. #3
    turbo addict
    Join Date
    Nov 2008
    Location
    Plainfield, Illinois
    Posts
    2,887

    Re: 1993 Daytona Door Panels and Engine Wiring

    Quote Originally Posted by raccoon View Post
    neato, never seen a driver door foam where you pull on not broken.
    ive fond one that appeared perfect but when i pulled the armrest off it had a small crack starting i really should have kept it but i didn't

  4. #4

    Re: 1993 Daytona Door Panels and Engine Wiring

    This is the first time I've seen any 1992-93 door panels in AZ that weren't the same as a piece of toast. The car had a small amount of rust under it so I think it was here for a short time and somewhere else that didn't have 360 days of sun/year. I got all the ground DEFECTS off of it along the sides plus the rear wiper stuff. The seats are still there and really nice along with the front end and rear clip. Has power windows. Drive train gone. It's in Phoenix at Auto Salvage 602-252-4591. Talk to Rick and tell him I sent you there if anyone needs and parts from one. Martin

  5. #5
    turbo addict
    Join Date
    Nov 2008
    Location
    Plainfield, Illinois
    Posts
    2,887

    Re: 1993 Daytona Door Panels and Engine Wiring

    give me the VIN ill tell you where its from

  6. #6

    Re: 1993 Daytona Door Panels and Engine Wiring

    didn't get the VIN

  7. #7

    Re: 1993 Daytona Door Panels and Engine Wiring

    still have this stuff.....make an offer!

  8. #8

    Re: 1993 Daytona Door Panels and Engine Wiring

    would take 60.00 for the pair of door panels

  9. #9
    turbo addict
    Join Date
    Nov 2008
    Location
    Plainfield, Illinois
    Posts
    2,887

    Re: 1993 Daytona Door Panels and Engine Wiring

    would u sell just the drivers side arm rest?

  10. #10

    Re: 1993 Daytona Door Panels and Engine Wiring

    still have them

  11. #11
    Garrett booster Turbo Mopar Contributor
    Join Date
    Feb 2007
    Location
    Ohio
    Posts
    219

    Re: 1993 Daytona Door Panels and Engine Wiring

    PM me how much for the door panels shipped to 44035

  12. #12

    Re: 1993 Daytona Door Panels and Engine Wiring

    anybody want these?

  13. #13
    turbo addict
    Join Date
    Jan 2007
    Location
    South Gillies, ON. Canada
    Posts
    2,923

    Re: 1993 Daytona Door Panels and Engine Wiring

    I just read someone b1tching about not being able to find these. somewhere.
    1988 Lancer Shelby 2.2TII 1989 Shadow ES 2.5TI 1992 Lebaron Sedan 3.0Auto 1993 Acclaim 2.5TI-A520 Hoard parts now!

  14. #14
    Garrett booster Turbo Mopar Contributor
    Join Date
    Jul 2009
    Location
    VA Beach
    Posts
    110

    Re: 1993 Daytona Door Panels and Engine Wiring

    Wrong year for me...need 1990 panels. (That would be me was bitching about not finding them...)

  15. #15
    Supporting Member Turbo Mopar Contributor supercrackerbox's Avatar
    Join Date
    Dec 2005
    Location
    Firth, Nebraska
    Posts
    5,022

    Re: 1993 Daytona Door Panels and Engine Wiring

    Sorry, didn't know they were different.

  16. #16
    Garrett booster Turbo Mopar Contributor
    Join Date
    Jul 2009
    Location
    VA Beach
    Posts
    110

    Re: 1993 Daytona Door Panels and Engine Wiring

    They would fit fine, and would actually work quite well, but they don't have the door storage bin like the 90's did.

  17. #17
    turbo addict
    Join Date
    Dec 2005
    Location
    MOTOR CITY
    Posts
    1,570

    Re: 1993 Daytona Door Panels and Engine Wiring

    not all cars received map pocket door panels. it was optional based on the interior package. My friend had a 90, i had a 92, and my brother had a 93 and none of them had that feature.

  18. #18
    Supporting Member Turbo Mopar Contributor supercrackerbox's Avatar
    Join Date
    Dec 2005
    Location
    Firth, Nebraska
    Posts
    5,022

    Re: 1993 Daytona Door Panels and Engine Wiring

    I can't believe I didn't catch that, considering I use the ones in my car extensively.





    It's really sad how much crap builds up in a 700 mile a week daily driver.

Similar Threads

  1. General Huge TD parts sale! 2.2T2's, 555, 520, more!, also parting 87 Shelby Daytona
    By daytonaturbo87 in forum Parts For Sale
    Replies: 37
    Last Post: 12-19-2009, 02:55 AM
  2. 1990 Daytona Shelby VNT Engine
    By Force Fed Mopars in forum Parts For Sale
    Replies: 9
    Last Post: 04-26-2006, 07:12 AM
  3. Tip for engine rebuilding
    By slasky in forum Old FAQ Info
    Replies: 0
    Last Post: 12-21-2005, 10:10 AM
  4. SMEC Fault Codes
    By Frank in forum Old FAQ Info
    Replies: 0
    Last Post: 12-17-2005, 02:50 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •