Need to get power steering put on the TIII in my Omni, anyone done this ??
What parts where used ?
I am running the TIII crank pulley and a 4 rib belt to run the water pump & alt.
Need to get power steering put on the TIII in my Omni, anyone done this ??
What parts where used ?
I am running the TIII crank pulley and a 4 rib belt to run the water pump & alt.
I don't think it has been done with the stock TIII pulleys. Every TIII in an L body has had the 8V PS pump and pulley setup.
8v crank pulley will not clear the timming belt tensioner.
I am going to try the late 8V pump and brackets and change the pump pulley to a 4 rib.
Also have a late model pump with a remote resivore that will bolt to the brackets.
If the belt lines up, I would like to run it all off one belt.
8v underdrive pulley clears the tensioner, but does not turn the accessories fast enough.