2.0 intake manifold?

[TurboII]

okay, were do you get these when they crack? besides the dealer? can you get them in aluminum?
i looked in ebay and found used (dont wanna go that route)
google'd ...wtf


Joey

[thedon809]

Just go to a JY and pick one up. I would stick with a plastic manny as they supposedly make more power than an aluminum one (smoother on the inside). Aluminum intake manifolds came on some 95-96 sohc neons.

[shadow88]

Probably a dohc, right? Cracked? I haven't seen that before. Either way, jy is probably the best place to look. Post up a picture, please?

[thedon809]

Probably a dohc, right? Cracked? I haven't seen that before. Either way, jy is probably the best place to look. Post up a picture, please?

I'm guessing its a single cammer because he asked if he can get them in aluminum. If it's a small crack I would jb weld it.

[TurboII]

I'm guessing its a single cammer because he asked if he can get them in aluminum. If it's a small crack I would jb weld it.

its my wifes car.i really dont care if the aluminum doesnt make power. I just want reliability. My wifes car has a few issue's that i gotta sort out. such as the extra time it takes to crack the engine before it kicks on (my guess weak fuel pump or regulator), also the annoying vacuum leak that i keep hearing but cant see!!!! other then that 150,000 reliable miles the car gives! sees 600 miles a week and she runs strong...

Joey

[Captain Chaos]

I'm guessing its a single cammer because he asked if he can get them in aluminum. If it's a small crack I would jb weld it.

I agree that its probably a SOHC. 95 SOHC Neons had aluminum intakes. "kind of" hard to find but not impossible.

[TurboII]

well worst come to worst ill just find another plastic one just need one pronto... i hit up ebay and craiglist or maybe a neon froum


Joey

[Turbodave]

I have an Aluminum one off a 95 SOHC car, bought it as a spare for my neon, but my plastic one has been good. If your interested I could probably get it shipped this weekend. I can do $50 for it.

[TurboII]

I have an Aluminum one off a 95 SOHC car, bought it as a spare for my neon, but my plastic one has been good. If your interested I could probably get it shipped this weekend. I can do $50 for it.

plastic or aluminum?

[135sohc]

plastic or aluminum?

I have an Aluminum one off a 95 SOHC car, bought it as a spare for my neon, but my plastic one has been good. If your interested I could probably get it shipped this weekend. I can do $50 for it.

[TurboII]

do you take paypal

[Turbodave]

Joey, I do take paypal, just send me a PM and I'll get you my info. It's in my barn about 30min from home, but might be able to get there this weekend, or Monday at the latest so could have it to you next week sometime

[TurboII]

Pm'd sent

[TurboII]

will this bolt up to a 2.0 as a replacement for the plastic manifolds?

http://cgi.ebay.com/ebaymotors/ws/eB...44109343321219

[Sgt Craig]

will this bolt up to a 2.0 as a replacement for the plastic manifolds?

http://cgi.ebay.com/ebaymotors/ws/eB...44109343321219

No SOHC and DOHC have differen bolt patterns,

[ShadowFromHell]

1st or 2gn? I have a indy intake for a sohc2g Id let go for 200 + shipping. Probaly overkill for your fies car thou!

[TurboII]

1st or 2gn? I have a indy intake for a sohc2g Id let go for 200 + shipping. Probaly overkill for your fies car thou!

hahahahaha yea i think so lmao!

[TurboII]

okay i called dealer 178 bucks which isnt bad at all. But i think the gasket pooped on me so will see