My first project with MasterCam and a Haas CNC.
If you need something CNC'd for a reasonable price, let me know. I'm looking for more projects to gain some more experience.
Steve
My first project with MasterCam and a Haas CNC.
If you need something CNC'd for a reasonable price, let me know. I'm looking for more projects to gain some more experience.
Steve
Nice work! Will it cut 1/2 stainless?
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
Thanks! How bout a turbo-swigvalve flange? how much would that run & could you make the hole for the Wastegate puck to be mounted in it
like this one but chrysler pattern
I could attempt the downpipe/wastegate flange, but would need all of the dimensions or a part-in-hand.
Nice flange,
Can you cut phenolic?
Can you do shafts? Like this-
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
nice work Steve, gonna wanna take some off the ends especially the PS side if you're running PS. I think I have the closest tapped hole centerline like .600-.750 (have to look at my notes) away from that edge and you can just get the PS cap off on the metal pump.
Steve likes his pumps in the electric variety
Nice work Steve. I'm in market for a nice upper plenum manifold or even the part you made and I'll make my own. Just needs to fit into a L-body. I keep trying to purchase one and they never seem to materialize. I have a lower manifold all set and ready to go and a heavily welded upper ready for some flow bench comparisons.
Todd Nelson
guess mine wasn't nice enough. I tried trading you cam gears for one
wow, im impressed, id like one with a little more length and width, not sure the measurements yet, but im going to build an upper plenum with the throttle body on the pass side, and your flange is the missing piece of my puzzle.
only other thing i can think of is and intake manifold to head flange? that would be cool, not much else seems challenging to me right now?
I'm just giving you a bit of crap Todd, Don't take me seriously.
The flange in the picture will work with the ZF style PS pump, but would need to be trimmed to work with the metal can PS pump. Custom length is not a problem. But you can't go much further to the driver's side without running into clearance problems with the power brake booster.
The flange is 3" wide, but I could make it wider. However, firewall and or fuel rail clearance starts to become an issue.
I've never machined phenolic and will check with the CNC owner about the possibility. I'm also interested in making some thermal barrier spacers for the TIII, but was going to look at using some different plastics.
I'm going to play around with making a head / intake manifold flange for both the 8V and TIII this winter.
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
phenolic is a mess to machine. Until you start cutting it you have no idea. The stuff works well but I'll never cut any again.
I can make copies of the flange with custom lengths or other small changes for $60. This covers the material and run time on the CNC (bugger is expensive).
About the downpipe/wastegate flange for the Chrysler turbo....I've been running a Ford style turbine housing for years and got rid of the Chrysler stuff long ago. You'd have to send me a Chrysler flange to copy.
Simon, the pictures of the shafts(?) did not work on my computer. Can you try it again. I do also have access to a CNC lathe, so shafts should be no problem.
Still waiting on the answer about machining materials other that aluminum and steel. I'm afraid some materials may contaminate the coolant.
Steve
Ok, try this and it looks like one of these might be a good idea, input shafts, there are some made out of 904 but you have to get a custom converter,
I can send samples of both if you can do it for reasonable price,
The rear output shaft slides out of that housing, I can take some better pics if you want.
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
"The Constitution is not an instrument for the government to restrain the people, it is an instrument for the people to restrain the government - lest it come to dominate our lives and interests." - Patrick Henry
Bad laws are the worst sort of tyranny.
- Edmund Burke