HUGE Oil leak please help me track it down
So went out for a test drive, and I have a HUGE oil leak. its not leaking when just ideling but under boost or driveing it is BAD. I do have a shitty oil line that I made up, and it never leaked before so I thaught it was that leaking so I replaced it with new claps and hose, but oil is coming from someplace bad. it cover the under side of the car, and firewall, and the heater hoses so its spraying over there. Any ideas?
There's a bolt hole on the drivers side of the head that goes all the way thu to the inside, did you put that bolt back in ?
top of bottem part of the head? I will go out and look?
There is like three bolt holes, I have one that has a ground going to it. and then there is a hole were it holds the bracket for the water line for the turbo, and then a lower bolt that I dont have in there.
2022 Viper runs 9s
you have to be signed up to read that?
I signed up to read it. im kinda lost on that. I have the port on the valve cover covering off and the PCV hooked into that and then a line running into the intake is that right??
Can someone help me under stand how I should have this all hooked up? Thanks guys
do you have a T (tee) coming off of the valve cover?
2022 Viper runs 9s
The threaded hole for the bracket goes thu to the inside.Originally Posted by 87yorker
Yeah I dident have a bolt in there, I just put it back in and put some RTV on it. and No I dont have a T for the valve cover, I have it just comeing off the valve cover to the intake manafold.
Here is a picture, as you can see the PCV valve is stuck inside the hose and then ran to the intake man. the part by the fuel rail is were I have it going.
That bolt fixed the leak no more leaking, now im having a new problem, I will start a differnt thread tho
Posting Permissions
Reply With Quote