I found my oil feed line leaking at the fitting on the center section of the turbo. i looked at the line and fittings, its not like the Mistu or Garrett turbos. anybody replace one of these and what did you do or where did you get one???
I found my oil feed line leaking at the fitting on the center section of the turbo. i looked at the line and fittings, its not like the Mistu or Garrett turbos. anybody replace one of these and what did you do or where did you get one???
Pics?
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
maybe tomorrow if i have time to snap a picture
picture of fitting
Looks like a GM type setup, so either the turbo has a hydraulic fitting or a AN, most likely its still 1/8" pipe thread into the turbo.
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
its looks like that fitting on the oil switch entension on the front of the block and the turbo. my friend says its just a single flare on the line and thats all i need is a line and to bend and flare it
use brake line?
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
the parts catalog says the fitting size is m10x1.5x7/16 whatever that means
where are you getting the size
The turbo feed line looks to be a flare, similiar to a brake line, so if you are wanting to replace the whole line, you get a braided line, -4, then the turbo most likely use's a 1/8 pipe thread so you get a 1/8 to -4 fitting, the oil distribution side, either another pipe plug or find the inverted flare adapter and use the stock spot. Make sense?
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
yea just didnt know what you were talking about. i have no idea with fittings and changing them
No the fitting into the IHI turbo is not NPT pipe, It's metric. I hate to tell you this Tom but it's a very odd pitch tapered thread. I ended up borrowing one from another TD guy when I got my parts car back up and running. Mine was cross threaded when I bought my 16V parts car.
Good luck cause your gonna need it. Maybe one of our vendors can supply this, or focus on someone that rebuilds IHI turbos. Forget the hardware, hydraulic fitting stores, cause I've been there and done that.
Todd
Chris Wright www.TurbosUnleashed.com Chris@TurbosUnleashed.com 602-76-BOOST Tech/Sales#: Monday-Saturday 9AM-7PM MST Proudly Serving the Turbo-Mopar Community since 1997 TU is a performance, not marketing company. We provide accurate performance data on all our performance products. Fabricating data to make us appear better is just not our style. Do the research before you buy. ROCK BOTTOM PRICES WITHOUT THE HIDDEN HANDLING FEES.... -----HOME OF THE 9 SECOND FWD T-M CLUTCH-----
cool, thanks Chris, please post if you do find the correct size. Jdawg posted this m10x1.5x7/16 , isnt this metric??
Im thinkin metric on one side and sae on the other, it also say the one in the front of the block is the same fitting
http://www.anplumbing.com/shop/
Might find something here.
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info