Page 1 of 6 12345 ... LastLast
Results 1 to 20 of 114

Thread: Part Out: 88' RED SHELBY Z

  1. #1
    Garrett booster
    Join Date
    Jul 2009
    Location
    Sunshine State :)
    Posts
    198

    Talking Part Out: 88' RED SHELBY Z

    Parting out a complete 88' red shelby z

    2.2L TI motor - runs but has rod knock - $200
    auto tranny - shifted fine - $200
    ground fx - no cracks - $200
    gray power enthusiast seats, great condition - $50 for both front seats, $25 a piece (for individuals) and back seat - $50 *$100 for all 4*
    88 TI computer - $100
    crab wheels,only 3 - $25 a piece
    3 piece spoiler - $60
    tail lights, un-cracked - $75 for all 3
    tail light assy - $50
    wiring harness - $100
    ALL underhood relays - $10 shipped
    fenders - $30 a piece
    drivers side mirror - $25
    Chin Spoiler - SOLD!!!!
    Anything else send me a PM. **ALL PARTS ARE BEST OFFER.** Shipping is NOT included unless noted. Need to get it out of my drive way in a few days. Will Mark what has been sold so that you know what I have and what I don't, This is a complete car so anything you want let me know, and I do mean BEST OFFER!!. Paypal fees do apply. PM and I will send you the e-mail address that the payment goes to.

    There is complete suspension, brakes, carpet, panels, etc,etc. It is a complete car, there's a title to it but it never got registered. The body is completely rust free, I am going to take the floor board and cut the rear panels unless some one wants the complete car or the shell
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	DSC02068.jpg 
Views:	80 
Size:	403.2 KB 
ID:	17583   Click image for larger version. 

Name:	DSC02069.jpg 
Views:	80 
Size:	226.2 KB 
ID:	17584   Click image for larger version. 

Name:	DSC02070.jpg 
Views:	81 
Size:	217.8 KB 
ID:	17585   Click image for larger version. 

Name:	DSC02071.jpg 
Views:	99 
Size:	271.2 KB 
ID:	17586   Click image for larger version. 

Name:	DSC02072.jpg 
Views:	112 
Size:	459.9 KB 
ID:	17587   Click image for larger version. 

Name:	DSC02073.jpg 
Views:	95 
Size:	433.1 KB 
ID:	17588  

    Click image for larger version. 

Name:	DSC02074.jpg 
Views:	101 
Size:	474.4 KB 
ID:	17589   Click image for larger version. 

Name:	DSC02075.jpg 
Views:	89 
Size:	230.7 KB 
ID:	17590   Click image for larger version. 

Name:	DSC02076.jpg 
Views:	121 
Size:	216.0 KB 
ID:	17591   Click image for larger version. 

Name:	DSC02077.jpg 
Views:	86 
Size:	395.6 KB 
ID:	17592   Click image for larger version. 

Name:	DSC02079.jpg 
Views:	105 
Size:	198.0 KB 
ID:	17593   Click image for larger version. 

Name:	DSC02080.jpg 
Views:	87 
Size:	128.6 KB 
ID:	17594  

    Click image for larger version. 

Name:	DSC02081.jpg 
Views:	95 
Size:	227.8 KB 
ID:	17595   Click image for larger version. 

Name:	DSC02082.jpg 
Views:	78 
Size:	150.1 KB 
ID:	17596   Click image for larger version. 

Name:	DSC02083.jpg 
Views:	79 
Size:	160.6 KB 
ID:	17597   Click image for larger version. 

Name:	DSC02084.jpg 
Views:	80 
Size:	146.9 KB 
ID:	17598   Click image for larger version. 

Name:	DSC02085.jpg 
Views:	80 
Size:	434.0 KB 
ID:	17599   Click image for larger version. 

Name:	DSC02086.jpg 
Views:	65 
Size:	153.8 KB 
ID:	17600  

    Click image for larger version. 

Name:	DSC02087.jpg 
Views:	73 
Size:	198.5 KB 
ID:	17601   Click image for larger version. 

Name:	DSC02088.jpg 
Views:	100 
Size:	387.9 KB 
ID:	17602   Click image for larger version. 

Name:	DSC02089.jpg 
Views:	69 
Size:	223.6 KB 
ID:	17603   Click image for larger version. 

Name:	DSC02090.jpg 
Views:	83 
Size:	117.8 KB 
ID:	17604   Click image for larger version. 

Name:	DSC02091.jpg 
Views:	76 
Size:	237.5 KB 
ID:	17605   Click image for larger version. 

Name:	DSC02092.jpg 
Views:	86 
Size:	421.2 KB 
ID:	17606  

    Click image for larger version. 

Name:	DSC02093.jpg 
Views:	88 
Size:	409.0 KB 
ID:	17607   Click image for larger version. 

Name:	DSC02094.jpg 
Views:	80 
Size:	183.9 KB 
ID:	17608   Click image for larger version. 

Name:	DSC02095.jpg 
Views:	74 
Size:	146.5 KB 
ID:	17609   Click image for larger version. 

Name:	DSC02096.jpg 
Views:	74 
Size:	199.1 KB 
ID:	17610   Click image for larger version. 

Name:	DSC02097.jpg 
Views:	84 
Size:	199.1 KB 
ID:	17611   Click image for larger version. 

Name:	DSC02098.jpg 
Views:	78 
Size:	197.1 KB 
ID:	17612  

    Click image for larger version. 

Name:	DSC02099.jpg 
Views:	88 
Size:	198.8 KB 
ID:	17613  
    Last edited by 88wdywoodpecker; 09-26-2009 at 04:00 AM.

  2. #2

    Re: Part Out: 88' RED SHELBY Z


  3. #3
    Hybrid booster
    Join Date
    Dec 2006
    Location
    Chicago burbs
    Posts
    331

    Re: Part Out: 88' RED SHELBY Z

    I'm interested in the front chin spoiler.
    Shipping would kill.

    Long shot: Anyone passing through Nashville on the way to Chicago?

    Ron

  4. #4
    Hybrid booster
    Join Date
    Dec 2005
    Location
    Hampton, VA
    Posts
    297

    Re: Part Out: 88' RED SHELBY Z

    Oh hell. That was the one I was trying to buy from a certain someone. Dammit. Another one that shouldn't be parted.

  5. #5
    Garrett booster
    Join Date
    Jul 2009
    Location
    Sunshine State :)
    Posts
    198

    Re: Part Out: 88' RED SHELBY Z

    Ehh, it needs way too much work and there's a title problem. The reason you couldn't buy it is still the case, been sitting for years because of it. The person who sold it signed the title and was supposed to switch it (said here hang on to the title until we're all ready to go). Well... That individual went to jail for 10 years. Four more years before it can even be titled. But we got it to turn over today which was a nice surprise. I do know of one that's a t-top if you'd be interested.

  6. #6
    Garrett booster
    Join Date
    Jul 2009
    Location
    Sunshine State :)
    Posts
    198

    Re: Part Out: 88' RED SHELBY Z

    Quote Originally Posted by TurboRon25 View Post
    I'm interested in the front chin spoiler.
    Shipping would kill.

    Long shot: Anyone passing through Nashville on the way to Chicago?

    Ron
    I can find out what it weighs and get a quote if you want.

  7. #7

    Re: Part Out: 88' RED SHELBY Z

    Quote Originally Posted by Abkshelby View Post
    Oh hell. That was the one I was trying to buy from a certain someone. Dammit. Another one that shouldn't be parted.
    LOL,i told you,you could file for a lost title.its rust free,needs a fuel pump and a rod bearing

  8. #8

    Re: Part Out: 88' RED SHELBY Z

    it will be about $30 to ship to chicago,but i may have it sold already

  9. #9
    Hybrid booster
    Join Date
    Dec 2005
    Location
    Hampton, VA
    Posts
    297

    Re: Part Out: 88' RED SHELBY Z

    Quote Originally Posted by midnighttoker View Post
    LOL,i told you,you could file for a lost title.its rust free,needs a fuel pump and a rod bearing
    You can get the title. I'm not doing it. Just part it out like your going to do anyway. I'm done trying.

  10. #10

    Re: Part Out: 88' RED SHELBY Z

    i dont have the time to mess with the title,i have 2 dead cars in the drive way and an association that will slap a tow sticker on it.the vnt sat at my buddies house for 3 years cause they put a tow sticker on it
    plus,i need to look for a job and i have some side work lined up,just dont have time to mess with it

  11. #11

    Re: Part Out: 88' RED SHELBY Z

    added some more stuff,if you dont see something just ask and make an offer,the car is complete.please dont be afraid to make an offer,the car needs to go



    2.2L TI motor-runs but has rod knock-$150
    auto trany shifted fine-$150
    ground fx-no cracks-$150
    gray power enthusiast seats-$50 for both front seats or $25 a piece and back seat-$50-$100 for all
    88 TI computer-$80
    crab wheels,only 3-$25 a piece
    3 piece spoiler-$60
    tail lights,un cracked-$75 for all 3
    tail light assy-$50
    wiring harness-$80
    ALL underhood relays-$10 shipped
    fenders-$30 a piece
    drivers side mirror-$25
    shocks/struts $75
    gas tank $30
    sunroof setup $80
    k frame with control arms, sway bar, rack $80
    rear 1/4 window pair $30
    4 wheel disc brake setup with front knuckles $130
    driver door panel $30
    passenger door panel $30
    all seat belt components $30
    gray dash $25
    boost gauge/info center $25
    instrument cluster $50
    black rubber belt moldings complete set $30
    hatch $40
    shifter $25
    drivers door $30
    passenger door $30
    hood-$40
    front bumper cover $25
    head lights $30

  12. #12
    Hybrid booster
    Join Date
    Feb 2006
    Location
    Phoenix Metro, AZ
    Posts
    983

    Re: Part Out: 88' RED SHELBY Z

    If the chin is still available I may be able to drive out next weekend to get it. Are you keeping the 4th crab wheel? There are 4 in the pics.

  13. #13
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,688

    Re: Part Out: 88' RED SHELBY Z

    Quote Originally Posted by TurboRon25 View Post
    I'm interested in the front chin spoiler.
    Shipping would kill.

    Long shot: Anyone passing through Nashville on the way to Chicago?

    Ron
    They are bulky size-wise but light...

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  14. #14
    turbo addict
    Join Date
    Aug 2007
    Location
    florida
    Posts
    1,582

    Re: Part Out: 88' RED SHELBY Z

    Can you get me a shipping quote for the seats to 32816?

  15. #15

    Re: Part Out: 88' RED SHELBY Z

    Quote Originally Posted by W.P._Turbocars View Post
    If the chin is still available I may be able to drive out next weekend to get it. Are you keeping the 4th crab wheel? There are 4 in the pics.
    i was thinking about it for a spare for my car.you want all 4?

  16. #16

    Re: Part Out: 88' RED SHELBY Z

    Quote Originally Posted by 1984rampage View Post
    Can you get me a shipping quote for the seats to 32816?
    you have a pm

  17. #17
    Hybrid booster Tony Fields's Avatar
    Join Date
    Dec 2005
    Location
    Columbus, Indiana
    Posts
    633

    Re: Part Out: 88' RED SHELBY Z

    Quote Originally Posted by 88wdywoodpecker View Post
    Parting out a complete 88' red shelby z

    2.2L TI motor - runs but has rod knock - $200
    auto tranny - shifted fine - $200
    ground fx - no cracks - $200
    gray power enthusiast seats, great condition - $50 for both front seats, $25 a piece (for individuals) and back seat - $50 *$100 for all 4*
    88 TI computer - $100
    crab wheels,only 3 - $25 a piece
    3 piece spoiler - $60
    tail lights, un-cracked - $75 for all 3
    tail light assy - $50
    wiring harness - $100
    ALL underhood relays - $10 shipped
    fenders - $30 a piece
    drivers side mirror - $25

    Anything else send me a PM. **ALL PARTS ARE BEST OFFER.** Shipping is NOT included unless noted. Need to get it out of my drive way in a few days. Will Mark what has been sold so that you know what I have and what I don't, This is a complete car so anything you want let me know, and I do mean BEST OFFER!!. Paypal fees do apply. PM and I will send you the e-mail address that the payment goes to.

    There is complete suspension, brakes, carpet, panels, etc,etc. It is a complete car, there's a title to it but it never got registered. The body is completely rust free, I am going to take the floor board and cut the rear panels unless some one wants the complete car or the shell



    That's an airbag car....kinda rare

  18. #18
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,688

    Re: Part Out: 88' RED SHELBY Z

    What condition/price for the plastic rocker/sill covers?

    Maybe can share shipping with Ron's Chin Spoiler

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  19. #19
    Hybrid booster
    Join Date
    Feb 2006
    Location
    Phoenix Metro, AZ
    Posts
    983

    Re: Part Out: 88' RED SHELBY Z

    I found a set about 90 miles away. Going to go look at them tomorrow morning. Please keep me posted on the chin spoiler.

    Thanks
    Gary Brown

  20. #20

    Re: Part Out: 88' RED SHELBY Z

    so far,it looks like its up for grabs

Page 1 of 6 12345 ... LastLast

Similar Threads

  1. ASD Relay Part # 89 Daytona Shelby
    By SpoolinGLH in forum "I need help!"
    Replies: 3
    Last Post: 08-21-2009, 07:14 PM
  2. Mid-America Ford & Team Shelby Nationals
    By JamesL in forum Events, Racing, & Results!
    Replies: 26
    Last Post: 01-15-2009, 06:02 PM
  3. Shelby Valve Cover Part #'s
    By csx452 in forum Shelby Models - Whittier Factory Cars
    Replies: 18
    Last Post: 12-01-2007, 04:28 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •