Results 1 to 2 of 2

Thread: Bottle Temperature vs. Nitrous Pressure

  1. #1
    Super Moderator Turbo Mopar Staff contraption22's Avatar
    Join Date
    Dec 2005
    Location
    Havertown, PA
    Posts
    9,517

    Bottle Temperature vs. Nitrous Pressure

    This text has been borrowed from NitrousSupply.com.

    http://www.nitroussupply.com/bottletemp.php



    BOTTLE TEMPERATURE & NITROUS PRESSURE INFO


    The Relationship Between Bottle Temperatures and Nitrous Pressure

    Tech note: The lower the ambient temperature, the lower the resultant bottle pressure leading to a potential fuel rich condition. Although usually not harmful to the engine, loss of optimal power can occur. On the other hand, very high ambient temperatures can lead to leaner burning conditions and loss of optimal performance as well as possible damage to engine components. NOS gauges are an excellent way to monitor problems before they can occur.

    NOTE: NOS recommends a bottle pressure of 950 psi for optimum performance.


    Bottle Temp °F............Bottle Pressure (psi)
    -30.....................167
    -20.....................203
    -10.....................240
    0........................283
    10......................335
    20......................387
    32......................460
    40......................520
    50......................590
    60......................675
    70......................760
    80......................865
    85......................950
    97......................1069
    Mike Marra
    1986 Plymouth Horizon GLMF "The Contraption" < entertaining sponsorship offers
    Project Log:
    http://www.turbo-mopar.com/forums/showthread.php?69708-The-Contraption-2013-14&highlight=

  2. #2
    Supporting Member Turbo Mopar Contributor "Top Fuel" Bender's Avatar
    Join Date
    Mar 2006
    Location
    Hellertown,Pa
    Posts
    1,962

    Re: Bottle Temperature vs. Nitrous Pressure

    YOU'D the MAN


    what jets do I need for 9's
    10's AGAIN '07, '08, '09
    TFB Fabrications custom billet machined parts for you Turbo Mopar

Similar Threads

  1. Line pressure mod in valve body and theory
    By Torqueflite in forum Transmission
    Replies: 113
    Last Post: 05-03-2015, 05:55 PM
  2. Nitrous bottle heater question??
    By Clay in forum Maintenance & General Tech
    Replies: 5
    Last Post: 09-22-2008, 08:31 PM
  3. twin mitsu 2.5
    By 4cefedomni in forum Turbos & Intercoolers!
    Replies: 43
    Last Post: 04-09-2006, 10:37 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •