Gary Donovans garage sale

[mopar-tech]

I will be posting parts for sale here and rolling over the my SOHC Spirit R/T parts thread, please check back often! Since I no longer have a Turbo Dodge as a daily driver the only parts I'll be keeping are just those related to Reliant racing operations =)



I have a large number of cylinder heads, transaxles (555/568 and even a rare 520 with 2.50 final drive ratio *pending inspection*) that will be up for grabs as well as hundreds of other minor pieces. As they come up in the garage while I'm doing inventory they will be posted here.

Thanks for checking in! Gary Donovan

================================================== ========

Doublecore intercooler with all plumbing, fresh air intake and Talon BOV. $500


89 TII intake with fuel rail and 52 mm throttle body (neck ported) $100


523 transaxle (excellent condition, was rebuilt) $200

New gas tank with extra baffling and new pump $80

A/C lines, compressor & new Modine condensor (SOHC AA) still running R-12! $100

Rear disc brakes ($50)

Front big brake setup with knuckles $75

Springs front and rear $35

Four 16" Lebaron GTC lace rims with 3 good Goodyears LS tire $120

Rear R/T wing $75

R/T rack (no problems) $50

Turbo 2.5 radiator & fan, new from Mopar (not aftermarket junk) $80

87-89 Turbo II fan $20

Turbo II axles $20 each

Fresh ground 8 bolt flywheel $60

Used 8 bolt flywheel $20

Cylinder head turbo complete SOHC $30

SPIRIT R/T 16V UPPER INTERCOOLER HOSE $25
SPIRIT R/T 16V LOWER INTERCOOLER HOSE $25
SPIRIT R/T 16V TURBO TO INTERCOOLER HOSE $25
SPIRIT R/T TURBOCHARGER INLET HOSE $25
SPIRIT R/T 16V BOV INTERCOOLER PIPE $25
SPIRIT R/T 16V UPPER RADIATOR HOSE $5

87-89 radiator and intercooler set with all hoses $250

87 Turbo II intake with fuel rail complete $250


garydonovan@hotmail.com

[roachjuice]

u driving that duster around? thing looks sweet!

[mopar-tech]

u driving that duster around? thing looks sweet!

The Duster? Yes about once a week to car shows or work.

Going to bring it to Cecil and put the whip to it hard in November.

[2.216VTurbo]

Paypal ready for the front big brake set up and radiator/fan combo, pm me the total including shipping to 92691 unless you are coming out for Christmas again and you can just bring them with

Whats the wire diameter on those rear springs, the TC Masis have the limp .253 dia springs and I've had good luck by changing to HD Daytona springs but have not tried Spirit springs yet.

[turbovanman²]

Subscribed.

I wish shipping wouldn't be a killer, but I would love those GTC rims,

[mopar-tech]

Subscribed.

I wish shipping would be a killer but I would love those GTC rims,

Where too? I'll be at Cecil in November.

[turbovanman²]

Where too? I'll be at Cecil in November.

Blaine, Wa. 98230

Removing the tires would be even cheaper, I would hope.

[mopar-tech]

Blaine, Wa. 98230

Removing the tires would be even cheaper, I would hope.

Sure, I can pull the tires.

[turbovanman²]

Sure, I can pull the tires.

Can you get me quote, no rush, slow boat to Blaine,

[bakes]

How much for the 520 2.50 set to the same adress or just the gears out of it to make up the 2.50 raito if that make shipping the easer.

[boost geek]

How much for the 520 2.50 set to the same adress or just the gears out of it to make up the 2.50 raito if that make shipping the easer.

Now what's going on in that head of yours?

[bakes]

Remember salt flats idea!

[mopar-tech]

Remember salt flats idea!

That is why I saved the transmission, aside from being a really odd duck!

[roachjuice]

Remember salt flats idea!

salt flat turbomopar. hmmmmmm. id love to see this lol.

[mopar-tech]

Stuff added to the first post, every time I add something will bump.

[Mario]

Put me next in line for a price on the trans.

[135sohc]

A/C lines, compressor & new Modine condensor (SOHC AA) still running R-12! $100

I just want to verify. Thats the denso compressor and the low side service port is built into the manifold ontop on the compressor.

[mopar-tech]

I just want to verify. Thats the denso compressor and the low side service port is built into the manifold ontop on the compressor.

see pics on page 3

http://www.turbo-mopar.com/forums/sh...t=37606&page=3

will be a few days guys, i am working off a laptop. the main machine is down.

[mopar-tech]

Main machine back up, still reloading everything though.

[mopar-tech]

2 piece intake and camshaft with sprocket are sold!